SGM8711 [SGMICRO]
Micro-Power, RRIO, 1.8V Small Package, Push-Pull Output Comparator with Integrated Voltage Reference;
| 型号： | SGM8711 |
| 厂家： | 
Shengbang Microelectronics Co, Ltd |
| 描述： | Micro-Power, RRIO, 1.8V Small Package, Push-Pull Output Comparator with Integrated Voltage Reference |
| 文件： | 总11页 (文件大小：608K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SGM8711
Micro-Power, RRIO, 1.8V
Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
GENERAL DESCRIPTION
FEATURES
The SGM8711 is a single, rail-to-rail input and output
comparator with typical 2.2µA low power supply current.
The comparator operates from a wide range of 1.8V to
5.5V supply voltage, and is guaranteed to operate at
1.8V and 5V. This feature is suitable for battery-powered
applications. The push-pull output stage supports
rail-to-rail output swing.
● Low Quiescent Current:
2.2µA (TYP) at VS = 1.8V
● Wide Single-Supply Voltage Range: 1.8V to 5.5V
● Rail-to-Rail Input and Output
● Push-Pull Output Current Drive:
18mA (TYP) at VS = 5V
● Internal 1.2V Reference Voltage
● -40℃ to +85℃ Operating Temperature Range
● Available in a Green UTDFN-1.6×1.6-6L Package
The product features an uncommitted internal voltage
reference, comparator input common-mode around
200mV outside the power supply rails and can be
operated with a single power supply from 1.8V to 5.5V.
The internal 1.2V reference voltage offers low 42µV/℃
drift, is stable at 10nF capacitive load, and can produce
output current up to 2mA (TYP).
APPLICATIONS
Portable and Battery-Powered Applications
Alarm and Surveillance Circuits
Mobile Phones
The SGM8711 is available in a Green UTDFN-1.6×1.6-6L
package. The small package makes this device ideal
for use in hand-held electronics and mobile phone
applications. It is rated over the -40°C to +85°C
temperature range.
RC Timers
Hand-Held Electronics
Window Detectors
IR Receiver
SG Micro Corp
AUGUST2014–REV. A
www.sg-micro.com
Micro-Power, RRIO, 1.8V, Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
SGM8711
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM8711
UTDFN-1.6×1.6-6L
SGM8711YUDN6G/TR
TFX
Tape and Reel, 3000
-40℃ to +85℃
MARKING INFORMATION
NOTE: X = Date Code.
YY X
Date Code - Quarter
Serial Number
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
Supply Voltage, +VS to -VS ................................................6V
VIN Differential................................................... ±(+VS - (-VS))
Voltage at Input/Output Pins....... (-VS) - 0.3V to (+VS) + 0.3V
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
DISCLAIMER
SG Micro Corp reserves the right to make any change in
HBM.............................................................................4000V
MM.................................................................................400V
circuit design, or specifications without prior notice.
PIN CONFIGURATION
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range.......................-40℃ to +85℃
(TOP VIEW)
OVERSTRESS CAUTION
+IN
-VS
-IN
1
2
3
6
5
4
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
GND
VREF
VOUT
+VS
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
UTDFN-1.6×1.6-6L
SG Micro Corp
AUGUST 2014
www.sg-micro.com
2
Micro-Power, RRIO, 1.8V, Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
SGM8711
ELECTRICAL CHARACTERISTICS
(At TA = +25℃, +VS = 1.8V, -VS = 0V, VCM = +VS/2, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
2.2
0.5
0.5
2
MAX
4.1
UNITS
Supply Current
IS
IOUT = 0
µA
VCM = 0V
VCM = 1.8V
3.3
Input Offset Voltage
VOS
mV
3.3
Input Offset Average Drift
µV/℃
dB
Common Mode Rejection Ratio
Power Supply Rejection Ratio
Power Supply Ramp-Up Rate (1)
Large Signal Voltage Gain
CMRR
PSRR
VCM = 0V to 1.8V
55
74
5
68
VS = 1.8V to 5.5V, VCM = 0V
102
dB
V/s
dB
AVO
100
IOUT = 500μA
1.617
1.572
1.412
1.330
1.675
IOUT = 500μA, -40℃ ≤ TA ≤ +85℃
IOUT = 1mA
Output Swing High
Output Swing Low
Output Current
VOH
V
1.525
84
IOUT = 1mA, -40℃ ≤ TA ≤ +85℃
IOUT = -500μA
124
163
249
347
IOUT = -500μA, -40℃ ≤ TA ≤ +85℃
IOUT = -1mA
VOL
mV
mA
173
2
IOUT = -1mA, -40℃ ≤ TA ≤ +85℃
Source
1.15
1.0
Source, -40℃ ≤ TA ≤ +85℃
Sink
IOUT
-3.5
-2.0
-1.4
Sink, -40℃ ≤ TA ≤ +85℃
Overdrive = 10mV
11.7
5.6
Propagation Delay (High to Low)
Propagation Delay (Low to High)
Rise Time
μs
μs
ns
Overdrive = 100mV
Overdrive = 10mV
24.2
14.7
168
174
75
Overdrive = 100mV
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
f = 0.1Hz to 10Hz
tRISE
Fall Time
tFALL
ns
50
Noise of VREF
0.3
mVP-P
Voltage Reference
Reference Voltage
VREF
IREF = 0mA
1.182
1.200
42
1.218
V
Reference Voltage Drift
Reference Output Current (Source)
µV/℃
mA
2
SG Micro Corp
www.sg-micro.com
AUGUST 2014
3
Micro-Power, RRIO, 1.8V, Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
SGM8711
ELECTRICAL CHARACTERISTICS (continued)
(At TA = +25℃, +VS = 5V, -VS = 0V, VCM = +VS/2, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
2.3
0.5
0.5
2
MAX
4.4
UNITS
Supply Current
IS
IOUT = 0
µA
VCM = 0V
VCM = 5V
3.3
Input Offset Voltage
VOS
mV
3.3
Input Offset Average Drift
µV/℃
dB
Common Mode Rejection Ratio
Power Supply Rejection Ratio
Power Supply Ramp-Up Rate (1)
Large Signal Voltage Gain
CMRR
PSRR
VCM = 0V to 5V
63
74
5
76
VS = 1.8V to 5.5V, VCM = 0V
102
dB
V/s
dB
AVO
110
IOUT = 500μA
4.935
4.926
4.874
4.855
4.952
IOUT = 500μA, -40℃ ≤ TA ≤ +85℃
IOUT = 1mA
Output Swing High
Output Swing Low
Output Current
VOH
V
4.904
54
IOUT = 1mA, -40℃ ≤ TA ≤ +85℃
IOUT = -500μA
72
79
IOUT = -500μA, -40℃ ≤ TA ≤ +85℃
IOUT = -1mA
VOL
mV
mA
106
18
140
154
IOUT = -1mA, -40℃ ≤ TA ≤ +85℃
Source
14.0
10.5
Source, -40℃ ≤ TA ≤ +85℃
Sink
IOUT
-18
-15.5
-12.5
Sink, -40℃ ≤ TA ≤ +85℃
Overdrive = 10mV
12.7
5.6
38.1
29.5
39
Propagation Delay
(High to Low)
μs
μs
ns
Overdrive = 100mV
Overdrive = 10mV
Propagation Delay
(Low to High)
Overdrive = 100mV
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
f = 0.1Hz to 10Hz
Rise Time
Fall Time
tRISE
40
33
tFALL
ns
30
Noise of VREF
0.32
mVP-P
Voltage Reference
Reference Voltage
VREF
IREF = 0mA
1.182
1.200
41
1.218
V
Reference Voltage Drift
Reference Output Current (Source)
µV/℃
mA
2
NOTE:
1. If the power supply ramp-up rate is lower than 5V/s, the reference voltage output is not guaranteed to start up.
SG Micro Corp
www.sg-micro.com
AUGUST 2014
4
Micro-Power, RRIO, 1.8V, Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
SGM8711
TYPICAL PERFORMANCE CHARACTERISTICS
Propagation Delay vs. Input Common Mode Voltage
Propagation Delay vs. Input Common Mode Voltage
24
80
70
60
50
40
30
20
VS = 5V
VOD = 20mV
20
16
12
8
-40℃
+25℃
+85℃
-40℃
+25℃
+85℃
VS = 5V
VOD = 20mV
4
0
0
1
2
3
4
5
0
1
2
3
4
5
Input Common Mode Voltage (V)
Input Common Mode Voltage (V)
Propagation Delay vs. Supply Voltage
Propagation Delay vs. Supply Voltage
24
20
16
12
8
70
60
50
40
30
20
10
VCM = VS /2
VOD = 20mV
VCM = VS /2
VOD = 20mV
-40℃
+25℃
-40℃
+25℃
+85℃
4
+85℃
0
1
2
3
4
5
6
1
2
3
4
5
6
Supply Voltage (V)
Supply Voltage (V)
Propagation Delay vs. Overdrive
VS = 5V
Propagation Delay vs. Overdrive
VS = 5V
70
60
50
40
30
20
10
24
20
16
12
8
VCM = 0.5V
VCM = 0.5V
-40℃
+25℃
+85℃
-40℃
+25℃
4
+85℃
0
-500
-400
-300
-200
-100
0
0
100
200
300
400
500
Overdrive (mV)
Overdrive (mV)
SG Micro Corp
www.sg-micro.com
AUGUST 2014
5
Micro-Power, RRIO, 1.8V, Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
SGM8711
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Propagation Delay vs. Overdrive
Propagation Delay vs. Overdrive
VS = 5V
VCM = 4.5V
30
25
20
15
10
5
70
60
50
40
30
20
10
VS = 5V
VCM = 4.5V
-40℃
+25℃
+85℃
-40℃
+25℃
+85℃
0
-500
-400
-300
-200
-100
0
0
100
200
300
400
500
Overdrive (mV)
Overdrive (mV)
Offset Voltage Production Distribution
16000 Samples
Offset Voltage Production Distribution
22
20
18
16
14
12
10
8
6
4
2
0
20
18
16000 Samples
1 Production Lot
16 1 Production Lot
14
12
10
8
`
6
V
S = 5V
VCM = VS
VS = 5V
VCM = 0V
4
2
0
Offset Voltage (mV)
Offset Voltage (mV)
Reference Voltage Production Distribution
Supply Current vs. Temperature
30
27
24
21
18
15
12
9
4
3.5
3
VS = 5V
16000 Samples
1 Production Lot
2.5
2
VS = 5.0V
VS = 1.8V
6
3
1.5
0
1
-50
-25
0
25
50
75
100
Temperature (℃)
Reference Voltage (V)
SG Micro Corp
www.sg-micro.com
AUGUST 2014
6
Micro-Power, RRIO, 1.8V, Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
SGM8711
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Reference Voltage vs. Temperature
out = -0.1mA
Reference Voltage vs. Temperature
1.202
1.201
1.200
1.199
1.198
1.197
1.196
1.195
1.194
1.202
1.201
1.200
1.199
1.198
1.197
1.196
1.195
1.194
Iout = -0.1mA
I
Iout = 0mA
Iout = 0mA
Iout = 2mA
Iout = 2mA
V
S = 5V
VS = 1.8V
75 100
-50
-25
0
25
50
-50
-25
0
25
50
75 100
Temperature (℃)
Temperature (℃)
Propagation Delay (tPHL
V
)
Propagation Delay (tPHL
)
S = 1.8V
VS = 1.8V
VOD = 10mV
VOD = 100mV
VOUT
0V
VOUT
1V
/div
1V
/div
0V
VIN
VIN
0V
100mV
/div
100mV
/div
0V
Time (2µs/div)
Time (5µs/div)
Propagation Delay (tPLH
)
Propagation Delay (tPLH
)
VS = 1.8V
VOD = 10mV
VS = 1.8V
VOD = 100mV
1V
/div
VOUT
0V
1V
/div
VOUT
0V
100mV
/div
100mV
/div
0V
VIN
0V
VIN
Time (10µs/div)
Time (10µs/div)
SG Micro Corp
www.sg-micro.com
AUGUST 2014
7
Micro-Power, RRIO, 1.8V, Small Package, Push-Pull Output
Comparator with Integrated Voltage Reference
SGM8711
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Propagation Delay (tPHL
)
Propagation Delay (tPHL
)
VS = 5V
VS = 5V
VOD = 100mV
VOD = 10mV
VOUT
VOUT
2V
/div
2V
/div
0V
0V
VIN
VIN
0V
0V
100mV
/div
100mV
/div
Time (5µs/div)
Time (2µs/div)
Propagation Delay (tPLH
)
Propagation Delay (tPLH
)
VS = 5V
VOD = 100mV
VS = 5V
VOD = 10mV
VOUT
2V
VOUT
2V
/div
/div
0V
VIN
0V
0V
100mV
/div
100mV
/div
0V
VIN
Time (10µs/div)
Time (10µs/div)
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Original (AUGUST 2014) to REV.A
Page
Changed from product preview to production data.............................................................................................................................................All
SG Micro Corp
www.sg-micro.com
AUGUST 2014
8
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
UTDFN-1.6×1.6-6L
NOTE: All linear dimensions are in millimeters.
SG Micro Corp
TX00070.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
UTDFN-1.6×1.6-6L
7″
9.0
1.78
1.78
0.69
4.0
4.0
2.0
8.0
Q1
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明