SGM8958-2 [SGMICRO]
Low Vos, Low Noise, High Precision Zero-Drift Operational Amplifier;
| 型号： | SGM8958-2 |
| 厂家： | 
Shengbang Microelectronics Co, Ltd |
| 描述： | Low Vos, Low Noise, High Precision Zero-Drift Operational Amplifier |
| 文件： | 总17页 (文件大小：1032K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SGM8958-1/SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
GENERAL DESCRIPTION
FEATURES
The single SGM8958-1 and dual SGM8958-2 are low
power, high precision CMOS operational amplifiers,
which can operate from 1.8V to 5.5V single supply or
from ±0.9V to ±2.75V dual power supplies, while
consuming only 165μA quiescent current per amplifier.
The SGM8958-1/2 support rail-to-rail input and output
operation. The input common mode voltage range is
from (-VS) - 0.1V to (+VS) + 0.1V, and the output range
is from (-VS) + 0.005V to (+VS) - 0.005V.
● Low Input Offset Voltage: 10μV (MAX)
● Low Noise: 0.3μVP-P at 0.1Hz to 10Hz
● Input Voltage Noise: 12nV/ Hz
√
● Gain-Bandwidth Product: 1.8MHz
● Slew Rate : 0.7V/μs
● Integrated EMI Filter
● Rail-to-Rail Input and Output
● Support Single or Dual Power Supplies:
1.8V to 5.5V or ±0.9V to ±2.75V
● Quiescent Current: 165μA/Amplifier (TYP)
● -40℃ to +125℃ Operating Temperature Range
● Small Packaging:
The SGM8958-1/2 are designed to provide optimal
performance in low voltage and low power systems.
They have high impedance inputs and zero-drift 10μV
(MAX) offset voltage. These specifications make
SGM8958-1 Available in Green SOT-23-5, SC70-5
and SOIC-8 Packages
SGM8958-1/2 appropriate for
a
wide range of
SGM8958-2 Available in Green SOIC-8 and
TDFN-3×3-8L Packages
applications requiring high precision, such as high
linearity driver of high precision ADC.
The SGM8958-1 is available in Green SOT-23-5,
SC70-5 and SOIC-8 packages. The SGM8958-2 is
available in Green SOIC-8 and TDFN-3×3-8L packages.
They are specified over -40℃ to +125℃ temperature
range.
APPLICATIONS
Industrial Equipment
Battery-Powered Equipment
Sensor Signal Conditioning
SG Micro Corp
JULY 2022 – REV. A. 2
www.sg-micro.com
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SOT-23-5
SC70-5
SGM8958-1XN5G/TR
GGCXX
GIBXX
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 4000
-40℃ to +125℃
-40℃ to +125℃
-40℃ to +125℃
-40℃ to +125℃
-40℃ to +125℃
SGM8958-1
SGM8958-1XC5G/TR
SGM8958-1XS8G/TR
SGM8958-2XS8G/TR
SGM8958-2XTDB8G/TR
SGM
89581XS8
XXXXX
SOIC-8
SGM
89582XS8
XXXXX
SOIC-8
SGM8958-2
SGM
GGDDB
XXXXX
TDFN-3×3-8L
MARKING INFORMATION
NOTE: XX = Date Code. XXXXX = Date Code and Vendor Code.
SOT-23-5/SC70-5
SOIC-8/TDFN-3×3-8L
YYY X X
X X X X X
Date Code - Month
Date Code - Year
Serial Number
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
Supply Voltage...................................................................6V
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................4000V
MM.................................................................................400V
CDM ............................................................................1000V
RECOMMENDED OPERATING CONDITIONS
Specified Voltage Range ....................................1.8V to 5.5V
Operating Temperature Range.....................-40℃ to +125℃
OVERSTRESS CAUTION
DISCLAIMER
SG Micro Corp reserves the right to make any change in
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
JULY 2022
2
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
PIN CONFIGURATIONS
SGM8958-1 (TOP VIEW)
SGM8958-1 (TOP VIEW)
OUT
-VS
1
2
5
+VS
+IN
1
2
5
4
+VS
-VS
_
+
+IN
3
4
-IN
-IN
3
OUT
SOT-23-5
SC70-5
SGM8958-1 (TOP VIEW)
SGM8958-2 (TOP VIEW)
NC
-IN
1
8
7
6
5
NC
OUTA
-INA
+INA
-VS
1
8
7
6
5
+VS
_
_
2
3
4
+VS
OUT
NC
2
3
4
OUTB
-INB
+INB
_
+
+IN
-VS
+
+
NC = NO CONNECT
SOIC-8
SOIC-8
SGM8958-2 (TOP VIEW)
OUTA
+VS
1
2
3
4
8
7
6
5
-INA
+INA
-VS
OUTB
-INB
-VS
+INB
TDFN-3×3-8L
NOTE: For TDFN-3×3-8L package, exposed pad can be connected to -VS or left floating.
SG Micro Corp
JULY 2022
www.sg-micro.com
3
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
ELECTRICAL CHARACTERISTICS
(VS = 5V, VCM = VS/2, VOUT = VS/2, and RL = 10kΩ to VS/2, Full = -40℃ to +125℃, typical values are at TA = +25℃, unless
otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
TEMP
MIN
TYP
MAX
UNITS
Input Characteristics
3.5
10
21
+25℃
Full
Input Offset Voltage
VOS
VS = 5V
μV
Input Offset Voltage Drift
Input Bias Current
ΔVOS/ΔT
IB
Full
0.03
500
μV/℃
pA
+25℃
+25℃
+25℃
+25℃
Full
Input Offset Current
IOS
1000
pA
Input Common Mode Voltage Range
VCM
(-VS) - 0.1
108
(+VS) + 0.1
V
125
136
Common Mode Rejection Ratio
CMRR (-VS) - 0.1V < VCM < (+VS) + 0.1V
dB
dB
106
(-VS) + 0.1V < VOUT < (+VS) - 0.1V,
RL = 10kΩ
Open-Loop Voltage Gain
AOL
116
+25℃
Output Characteristics
Output Voltage Swing from Rail
Short-Circuit Current
RL = 10kΩ
5
11
mV
+25℃
+25℃
+25℃
ISC
17
34
mA
Capacitive Load Drive
Power Supply
See Typical Performance Characteristics
Specified Voltage Range
VS
Full
+25℃
Full
1.8
5.5
5
V
1
Power Supply Rejection Ratio
Quiescent Current/Amplifier
PSRR VS = 1.8V to 5.5V, VCM = 0.2V
μV/V
6
165
158
250
290
+25℃
Full
IQ
IOUT = 0A
μA
Turn-On Time
G = +1, VIN = 0.1V, RL = 10kΩ, CL = 30pF
μs
+25℃
Dynamic Performance
Gain-Bandwidth Product
Slew Rate
GBP
CL = 30pF
1.8
0.7
MHz
+25℃
+25℃
SR
G = +1, VOUT = 2VP-P, CL = 30pF
V/μs
Noise
Input Voltage Noise
Input Voltage Noise Density
f = 0.1Hz to 10Hz
f = 1kHz
0.3
12
μVP-P
+25℃
+25℃
en
nV/√Hz
SG Micro Corp
www.sg-micro.com
JULY 2022
4
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
ELECTRICAL CHARACTERISTICS (continued)
(VS = 1.8V, VCM = VS/2, VOUT = VS/2, and RL = 10kΩ to VS/2, Full = -40℃ to +125℃, typical values are at TA = +25℃, unless
otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
TEMP
MIN
TYP
MAX
UNITS
Input Characteristics
3.5
10
20
+25℃
Full
Input Offset Voltage
VOS
VS = 1.8V
μV
Input Offset Voltage Drift
Input Bias Current
ΔVOS/ΔT
IB
Full
0.04
500
μV/℃
pA
+25℃
+25℃
+25℃
+25℃
Full
Input Offset Current
IOS
1000
pA
Input Common Mode Voltage Range
VCM
(-VS) - 0.1
102
(+VS) + 0.1
V
118
128
Common Mode Rejection Ratio
CMRR (-VS) - 0.1V < VCM < (+VS) + 0.1V
dB
dB
100
(-VS) + 0.1V < VOUT < (+VS) - 0.1V,
RL = 10kΩ
Open-Loop Voltage Gain
AOL
107
+25℃
Output Characteristics
Output Voltage Swing from Rail
Short-Circuit Current
RL = 10kΩ
3
7
mV
+25℃
+25℃
+25℃
ISC
5
11
mA
Capacitive Load Drive
Power Supply
See Typical Performance Characteristics
Specified Voltage Range
VS
Full
+25℃
Full
1.8
5.5
5
V
1
Power Supply Rejection Ratio
Quiescent Current/Amplifier
PSRR VS = 1.8V to 5.5V, VCM = 0.2V
μV/V
6
220
83
340
395
+25℃
Full
IQ
IOUT = 0A
μA
Turn-On Time
G = +1, VIN = 0.1V, RL = 10kΩ, CL = 30pF
μs
+25℃
Dynamic Performance
Gain-Bandwidth Product
Slew Rate
GBP
CL = 30pF
1.4
0.7
MHz
+25℃
+25℃
SR
G = +1, VOUT = 1VP-P, CL = 30pF
V/μs
Noise
Input Voltage Noise
Input Voltage Noise Density
f = 0.1Hz to 10Hz
f = 1kHz
0.4
16
μVP-P
+25℃
+25℃
en
nV/√Hz
SG Micro Corp
www.sg-micro.com
JULY 2022
5
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS
At TA = +25℃, unless otherwise noted.
Quiescent Current vs. Temperature
Turn-On Time
0.3
VS = 1.8V
0.25
VS
G = +1, RL = 10kΩ, CL = 30pF
0.2
0V
0.15
0.1
0.05
0
VS = 5V
VOUT
0V
-50
-25
0
25
50
75
100 125
Time (50μs/div)
Temperature (℃)
Positive Over-Voltage Recovery
G = -10, RL = 10kΩ, CL = 30pF
Negative Over-Voltage Recovery
G = -10, RL = 10kΩ, CL = 30pF
VIN
0V
VIN
0V
0V
VOUT
VOUT
0V
Time (5μs/div)
Time (5μs/div)
Large-Signal Step Response
Small-Signal Step Response
VS = 5V, G = +1, RL = 10kΩ, CL = 30pF
VS = 5V, G = +1, RL = 10kΩ, CL = 30pF
Time (100μs/div)
Time (100μs/div)
SG Micro Corp
JULY 2022
www.sg-micro.com
6
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At TA = +25℃, unless otherwise noted.
Small-Signal Overshoot vs. Load Capacitance
Settling Time vs. Closed-Loop Gain
70
60
50
40
30
20
10
0
300
250
200
150
100
50
G = +1
VS = 5V, VOUT = 100mVP-P, RL = 10kΩ
VS = 1.8V
VS = 5V
0.1%
0
10
100
1000
1
10
100
1000
Load Capacitance (pF)
Closed-Loop Gain (V/V)
CMRR vs. Frequency
PSRR vs. Frequency
120
140
120
100
80
VS = 5V
VS = 5V
110
100
90
PSRR+
80
60
70
40
60
PSRR-
20
50
0
40
0.01
0.1
1
10
100
1000 10000
0.1
1
10
100
1000
10000
Frequency (kHz)
Frequency (kHz)
Channel Separation vs. Frequency
VS = 5V
Open-Loop Gain and Phase vs. Frequency
VS = 5V
0
80
60
40
20
0
45
G = +1000
RL = 10kΩ
CL = 30pF
Open-Loop Gain
-20
-40
0
-45
-90
-135
-180
-60
-80
Channel A to B
-100
-120
-140
Channel B to A
Phase
-20
0.1
10
1000
100000
0.1
1
10
100
1000
10000
Frequency (kHz)
Frequency (kHz)
SG Micro Corp
www.sg-micro.com
JULY 2022
7
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At TA = +25℃, unless otherwise noted.
0.1Hz to 10Hz Noise
Input Voltage Noise Density vs. Frequency
100
10
1
Continues with no 1/f (flicker) noise.
VS = 1.8V
VS = 5V
0.1
10
100
1000
10000
Time (2s/div)
Frequency (Hz)
Offset Voltage Production Distribution
30
25
20
15
10
5
7060 Samples
1 Production Lot
0
-8 -6 -4 -2
0
2
4
6
8
10
Offset Voltage (μV)
SG Micro Corp
www.sg-micro.com
JULY 2022
8
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
APPLICATION INFORMATION
Rail-to-Rail Input
Driving Capacitive Loads
When SGM8958-1/2 work at the power supply between
1.8V and 5.5V, the input common mode voltage range
is from (-VS) - 0.1V to (+VS) + 0.1V. In Figure 1, the ESD
diodes between the inputs and the power supply rails
will clamp the input voltage not to exceed the rails.
The SGM8958-1/2 are designed for unity-gain stable for
capacitive load up to 1nF. If greater capacitive load
must be driven in application, the circuit in Figure 3 can
be used. In this circuit, the IR drop voltage generated
by RISO is compensated by feedback loop.
+VS
RF
CF
VP
+
_
_
RISO
VN
VOUT
CL
VIN
+
-VS
Figure 1. Input Equivalent Circuit
Figure 3. Circuit to Drive Heavy Capacitive Load
Input Current-Limit Protection
Power Supply Decoupling and Layout
For ESD diode clamping protection, when the current
flowing through ESD diode exceeds the maximum
rating value, the ESD diode and amplifier will be
damaged, so current-limit protection will be added in
some applications. One resistor is selected to limit the
current not to exceed the maximum rating value. In
Figure 2, a series input resistor is used to limit the input
current to less than 10mA, but the drawback of this
current-limit resistor is that it contributes thermal noise
at the amplifier input. If this resistor must be added, its
value must be selected as small as possible.
A clean and low noise power supply is very important in
amplifier circuit design, besides of input signal noise,
the power supply is one of important source of noise to
the amplifiers through +VS and -VS pins. Power supply
bypassing is an effective method to clear up the noise
at power supply, and the low impedance path to ground
of decoupling capacitor will bypass the noise to GND.
In application, 10μF ceramic capacitor paralleled with
0.1μF or 0.01μF ceramic capacitor is used in Figure 4.
The ceramic capacitors should be placed as close as
possible to +VS and -VS power supply pins.
+VS
+VS
+VS
10μF
10μF
_
IOVERLOAD
10mA MAX
VOUT
0.1μF
0.1μF
VIN
+
_
_
VN
VP
VN
VP
VOUT
VOUT
+
+
Figure 2. Input Current-Limit Protection
10μF
-VS (GND)
Rail-to-Rail Output
The SGM8958-1/2 support rail-to-rail output operation.
In single power supply application, for example, when
+VS = 5V, -VS = GND, 10kΩ load resistor is tied from
OUT pin to VS/2, the typical output swing range is from
0.005V to 4.995V.
0.1μF
-VS
Figure 4. Amplifier Power Supply Bypassing
SG Micro Corp
www.sg-micro.com
JULY 2022
9
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
APPLICATION INFORMATION (continued)
the input are used to increase the input impedance and
eliminate drawback of low input impedance in Figure 5.
Grounding
In low speed application, one node grounding technique
is the simplest and most effective method to eliminate
the noise generated by grounding. In high speed
application, the general method to eliminate noise is to
use a complete ground plane technique, and the whole
ground plane will help distribute heat and reduce EMI
noise pickup.
_
R1
R2
VN
+
_
VOUT
+
VP
+
Reduce Input-to-Output Coupling
R3
To reduce the input-to-output coupling, the input traces
must be placed as far away from the power supply or
output traces as possible. The sensitive trace must not
be placed in parallel with the noisy trace in same layer.
They must be placed perpendicularly in different layers
to reduce the crosstalk. These PCB layout techniques
will help to reduce unwanted positive feedback and
noise.
_
R4
VREF
Figure 6. High Input Impedance Difference Amplifier
Active Low-Pass Filter
The circuit in Figure 7 is a design example of active
low-pass filter, the DC gain is equal to -R2/R1 and the
-3dB corner frequency is equal to 1/2πR2C. In this design,
the filter bandwidth must be less than the bandwidth of
the amplifier, the resistor values must be selected as
low as possible to reduce ringing or oscillation generated
by the parasitic parameters in PCB layout.
Typical Application Circuits
Difference Amplifier
The circuit in Figure 5 is a design example of classical
difference amplifier. If R4/R3 = R2/R1, then VOUT = (VP -
VN) × R2/R1 + VREF
.
R2
C
R1
R2
_
VN
R1
VOUT
_
R3
VIN
VP
+
VOUT
+
R4
VREF
R3 = R1 // R2
Figure 5. Difference Amplifier
Figure 7. Active Low-Pass Filter
High Input Impedance Difference Amplifier
The circuit in Figure 6 is a design example of high input
impedance difference amplifier, the added amplifiers at
SG Micro Corp
www.sg-micro.com
JULY 2022
10
SGM8958-1
SGM8958-2
Low VOS, Low Noise, High Precision
Zero-Drift Operational Amplifiers
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
JULY 2022 ‒ REV.A.1 to REV.A.2
Page
Updated Typical Performance Characteristics section.........................................................................................................................................7
MARCH 2022 ‒ REV.A to REV.A.1
Page
Updated Typical Performance Characteristics section.........................................................................................................................................7
Changes from Original (DECEMBER 2016) to REV.A
Page
Changed from product preview to production data.............................................................................................................................................All
SG Micro Corp
www.sg-micro.com
JULY 2022
11
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOT-23-5
1.90
D
e1
2.59
E1
E
0.99
b
e
0.95
0.69
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
c
θ
0.2
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.250
0.100
1.150
0.500
0.200
3.020
1.700
2.950
MIN
MAX
0.049
0.004
0.045
0.020
0.008
0.119
0.067
0.116
A
A1
A2
b
1.050
0.000
1.050
0.300
0.100
2.820
1.500
2.650
0.041
0.000
0.041
0.012
0.004
0.111
0.059
0.104
c
D
E
E1
e
0.950 BSC
1.900 BSC
0.037 BSC
0.075 BSC
e1
L
0.300
0°
0.600
8°
0.012
0°
0.024
8°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00033.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SC70-5
D
e1
0.65
e
1.9
E1
E
0.75
b
0.4
1.3
RECOMMENDED LAND PATTERN (Unit: mm)
L
L1
A
A1
A2
c
θ
0.20
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.100
0.100
1.000
0.350
0.150
2.200
1.350
2.450
MIN
MAX
A
A1
A2
b
0.900
0.000
0.900
0.150
0.080
2.000
1.150
2.150
0.035
0.000
0.035
0.006
0.003
0.079
0.045
0.085
0.043
0.004
0.039
0.014
0.006
0.087
0.053
0.096
c
D
E
E1
e
0.65 TYP
1.300 BSC
0.525 REF
0.026 TYP
0.051 BSC
0.021 REF
e1
L
L1
θ
0.260
0°
0.460
8°
0.010
0°
0.018
8°
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00043.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOIC-8
0.6
D
e
2.2
E1
E
5.2
b
1.27
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
c
θ
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.750
0.250
1.550
0.510
0.250
5.100
4.000
6.200
MIN
MAX
0.069
0.010
0.061
0.020
0.010
0.200
0.157
0.244
A
A1
A2
b
1.350
0.100
1.350
0.330
0.170
4.700
3.800
5.800
0.053
0.004
0.053
0.013
0.006
0.185
0.150
0.228
c
D
E
E1
e
1.27 BSC
0.050 BSC
L
0.400
0°
1.270
8°
0.016
0°
0.050
8°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00010.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
TDFN-3×3-8L
D
e
N8
D1
k
E
E1
N4
N1
L
b
BOTTOM VIEW
TOP VIEW
2.3
1.5 2.725
A
A1
A2
0.675
SIDE VIEW
0.65
0.24
RECOMMENDED LAND PATTERN (Unit: mm)
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
0.800
0.050
MIN
0.028
0.000
MAX
0.031
0.002
A
A1
A2
D
0.700
0.000
0.203 REF
0.008 REF
2.900
2.200
2.900
1.400
3.100
2.400
3.100
1.600
0.114
0.087
0.114
0.055
0.122
0.094
0.122
0.063
D1
E
E1
k
0.200 MIN
0.650 TYP
0.008 MIN
0.026 TYP
b
0.180
0.375
0.300
0.575
0.007
0.015
0.012
0.023
e
L
NOTE: This drawing is subject to change without notice.
SG Micro Corp
TX00058.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
SOT-23-5
SC70-5
7″
7″
9.5
9.5
3.20
2.25
6.40
3.35
3.20
2.55
5.40
3.35
1.40
1.20
2.10
1.13
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
2.0
2.0
2.0
2.0
8.0
8.0
Q3
Q3
Q1
Q1
SOIC-8
13″
13″
12.4
12.4
12.0
12.0
TDFN-3×3-8L
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
368
442
386
227
410
280
224
224
370
8
18
5
7″
13″
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明