SGM9125(EOL) [SGMICRO]
5-Channel, 5th-Order, Standard Definition Video Filter Driver;型号: | SGM9125(EOL) |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | 5-Channel, 5th-Order, Standard Definition Video Filter Driver |
文件: | 总9页 (文件大小:350K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM9125
5-Channel, 5th-Order, Standard
Definition Video Filter Driver
GENERAL DESCRIPTION
FEATURES
The SGM9125 is a rail-to-rail, 5-channel, 5th-order
output reconstruction filter with input clamps which can
operate from 3.3V to 5.5V single power supply, while
consuming an ultra-low 44mA quiescent current. The
device is optimized for low power, wide range of
television and set-top box applications.
• Supply Voltage Range: 3.3V to 5.5V
• 5-Channel 5th-Order 8MHz (SD) Filter
• Transparent Input Clamping
• Internal Gain: 6dB
• Quiescent Current: 44mA (TYP)
• AC- or DC-Coupled Inputs
• AC- or DC-Coupled Outputs
• Rail-to-Rail Output
The device has a -3dB bandwidth of 8MHz and 35V/µs
slew rate, allowing DC- or AC-coupled output.
SGM9125 can be DC-coupled or AC-coupled with input
video signal to eliminate out-of-band noise, such as the
output stage of DAC.
• -40℃ to +85℃ Operating Temperature Range
• Available in a Green TSSOP-14 Package
APPLICATIONS
The SGM9125 is available in a Green TSSOP-14
package. It operates over an ambient temperature
range of -40℃ to +85℃.
Video Amplifiers
Video Recorders
Video on Demand (VOD)
Cable and Satellite Set-Top Boxes
Portable and Handheld Products
Communication Devices
TVs
BLOCK DIAGRAM
IN1
6dB
6dB
6dB
6dB
6dB
OUT1
OUT2
OUT3
OUT4
OUT5
Transparent Clamp
8MHz, 5th-Order
8MHz, 5th-Order
8MHz, 5th-Order
8MHz, 5th-Order
8MHz, 5th-Order
IN2
Transparent Clamp
IN3
Transparent Clamp
IN4
Transparent Clamp
IN5
Transparent Clamp
SG Micro Corp
NOVEMBER 2012 –REV. A. 2
www.sg-micro.com
5-Channel, 5th-Order, Standard
Definition Video Filter Driver
SGM9125
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM9125
YTS14
XXXXX
SGM9125
TSSOP-14
SGM9125YTS14G/TR
Tape and Reel, 3000
-40℃ to +85℃
MARKING INFORMATION
NOTE: XXXXX = Date Code and Vendor Code.
X X X X X
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Input Voltage Range .....................GND - 0.3V to VCC + 0.3V
Supply Voltage, VCC....................................................... 6.0V
Junction Temperature ................................................+150℃
Storage Temperature Range........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s) ...........................+260℃
ESD Susceptibility
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
HBM............................................................................ 8000V
MM................................................................................ 400V
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range...................................3.3V to 5.5V
Operating Temperature Range ...................... -40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
2
5-Channel, 5th-Order, Standard
Definition Video Filter Driver
SGM9125
PIN CONFIGURATION
(TOP VIEW)
1
2
3
4
5
6
7
14
13
12
11
10
9
OUT1
OUT2
OUT3
GND
OUT4
OUT5
NC
IN1
IN2
IN3
VCC
IN4
IN5
NC
8
TSSOP-14
PIN DESCRIPTION
PIN
1
NAME
FUNCTION
IN1
IN2
Video Input for Channel 1.
Video Input for Channel 2.
Video Input for Channel 3.
Power Supply.
2
3
IN3
4
VCC
5
IN4
Video Input for Channel 4.
Video Input for Channel 5.
No Connect.
6
IN5
7
NC
8
NC
No Connect.
9
OUT5
OUT4
GND
OUT3
OUT2
OUT1
Filtered Output for Channel 5.
Filtered Output for Channel 4.
Ground.
10
11
12
13
14
Filtered Output for Channel 3.
Filtered Output for Channel 2.
Filtered Output for Channel 1.
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
3
5-Channel, 5th-Order, Standard
Definition Video Filter Driver
SGM9125
ELECTRICAL CHARACTERISTICS
(At RL = 150Ω connected to GND, VIN = 1VPP and CIN = 0.1μF, all outputs AC-coupled with 220μF, referenced to 400kHz, unless
otherwise noted.)
PARAMETER
Input Characteristics
CONDITIONS
TEMP
MIN
TYP
396
MAX
UNITS
550
752
+25℃
-40℃ to +85℃
+25℃
Output Level Shift Voltage (VOLS
)
VIN = 0V, No load
mV
mV
mA
dB
-180
-270
-6.0
-6.5
5.7
-110
Input Voltage Clamp (VCLAMP
Clamp Charge Current
)
IIN = -3.5mA
-40℃ to +85℃
+25℃
-4.75
6
VIN = VCLAMP -100mV
RL = 150Ω
-40℃ to +85℃
+25℃
6.4
6.5
Voltage Gain (AV)
5.6
-40℃ to +85℃
Output Characteristics
4.60
4.53
4.75
+25℃
Output Voltage High Swing
VIN = 3V, RL = 150Ω to GND
V
-40℃ to +85℃
Power Supply
Operating Voltage Range
3.3
44
37
5.5
V
+25℃
+25℃
51
44
Power Supply Rejection Ratio (PSRR)
Quiescent Current (IQ)
VCC = 3.5V to 5.0V
VIN = 0.5V
dB
-40℃ to +85℃
+25℃
55
63
mA
-40℃ to +85℃
AC Performance
-0.1dB Bandwidth
-3dB Bandwidth
RL = 150Ω
5.8
7.8
MHz
MHz
dB
V/μs
%
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
RL = 150Ω
Filter Response (Normalized Gain)
Slew Rate
fIN = 27MHz
43
2V Output step, 80% to 20%
PAL DC-coupled
35
0.21
0.23
1.05
1.13
30.4
-65
Differential Gain (DG)
Differential Phase (DP)
PAL AC-coupled
%
PAL DC-coupled
°
PAL AC-coupled
°
Group Delay Variation (D/DT)
Crosstalk (channel-to-channel)
Fall Time
Difference between 400kHz and 6.5MHz
f = 1MHz
ns
dB
ns
2V Output step, 80% to 20%
2V Output step, 80% to 20%
34.4
35.4
Rise Time
ns
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
4
5-Channel, 5th-Order, Standard
Definition Video Filter Driver
SGM9125
TYPICAL PERFORMANCE CHARACTERISTICS
At VCC = 5V, TA = +25℃, RL = 150Ω, all outputs AC-coupled with 220μF, unless otherwise noted.
Frequency Response
Phase vs. Frequency
3
0
270
180
90
-3
0
-6
-90
-180
-270
-9
-12
-15
0.1
1
10
100
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
Small Signal Step Response
Large Signal Step Response
0.3
0.2
0.1
0
0.75
0.5
0.25
0
-0.1
-0.2
-0.3
-0.25
-0.5
-0.75
-0.3 -0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7
-0.3 -0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7
Time (μs)
Time (μs)
Quiescent Current vs. Supply Voltage
Group Delay vs. Frequency
50
46
42
38
34
30
100
50
0
-50
-100
3
3.5
4
4.5
5
5.5
0.1
1
10
100
Supply Voltage (V)
Frequency (MHz)
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
5
5-Channel, 5th-Order, Standard
Definition Video Filter Driver
SGM9125
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At VCC = 5V, TA = +25℃, RL = 150Ω, all outputs AC-coupled with 220μF, unless otherwise noted.
Gain Error vs. Temperature
Quiescent Current vs. Temperature
1.4
1.2
1
54
50
46
42
38
34
0.8
0.6
0.4
0.2
0
-40
-15
10
35
60
85
-40
-15
10
35
60
85
Temperature (℃)
Temperature (℃)
Output Voltage Sw ing to the Positive Rail vs.
Output Current
Output Voltage Sw ing to the Negative Rail vs.
Output Current
5
1.4
1.2
1
4.75
4.5
4.25
4
-40℃
0.8
0.6
0.4
0.2
0
+25℃
+85℃
+85℃
+25℃
-40℃
0
20
40
60
80
100
0
20
40
60
80
100
Output Current (mA)
Output Current (mA)
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
6
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
TSSOP-14
D
E1
E
5.94
1.78
b
e
0.42
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
c
θ
A2
H
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
MIN
MAX
0.043
0.006
0.039
0.012
0.008
0.201
0.177
0.258
A
A1
A2
b
1.100
0.150
1.000
0.300
0.200
5.100
4.500
6.550
0.050
0.800
0.190
0.090
4.900
4.300
6.250
0.002
0.031
0.007
0.004
0.193
0.169
0.246
c
D
E
E1
e
0.650 BSC
0.25 TYP
0.026 BSC
0.01 TYP
L
0.500
1°
0.700
7°
0.02
1°
0.028
7°
H
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00019.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
TSSOP-14
13″
12.4
6.95
5.60
1.20
4.0
8.0
2.0
12.0
Q1
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
13″
386
280
370
5
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明