SGM9135(EOL) [SGMICRO]
4-Channel, 6th-Order Video Filter Driver for SD/HD (1080p);型号: | SGM9135(EOL) |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | 4-Channel, 6th-Order Video Filter Driver for SD/HD (1080p) |
文件: | 总9页 (文件大小:610K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM9135
4-Channel, 6th-Order Video
Filter Driver for SD/HD(1080p)
GENERAL DESCRIPTION
FEATURES
● Supply Voltage Range: 3.1V to 5.5V
● Three 6th-Order 1080p High Definition Filters
● One 6th-Order Standard Definition Filter
● Clamp Mode Active with AC-Coupled Inputs
● Clamp Mode Inactive with DC-Coupled Inputs
● AC- or DC-Coupled Outputs
The SGM9135 is a 4-channel, 6th-order output
reconstruction filter which can operate from 3.1V to
5.5V single power supply. It is designed to replace
passive LC filters and drivers with an integrated device.
One channel is Standard Definition (SD) filter while the
rest three channels are Definition (HDp) filters.
● DC-Coupled Outputs Eliminate AC-Coupled
Capacitors
The device allows DC- or AC-coupled output.
SGM9135 can be DC-coupled or AC-coupled with input
video signal to eliminate out-of-band noise, such as the
output stage of DAC. Internal clamp circuitry may be
used if AC-coupled inputs are required.
● -40℃ to +85℃ Operating Temperature Range
● Available in a Green MSOP-10 (Exposed Pad)
Package
APPLICATIONS
The SGM9135 is available in a Green MSOP-10
(Exposed Pad) package. It operates over an ambient
temperature range of -40℃ to +85℃.
Video Recorders
Video on Demand (VOD)
Cable and Satellite Set-Top Boxes
Portable and Handheld Products
Communication Devices
TVs
BLOCK DIAGRAM
Clamp
6dB
SD OUT1
SD IN1
SD, 6th-Order
Clamp
Clamp
Clamp
6dB
6dB
6dB
HD IN2
HD OUT2
HD OUT3
HD OUT4
HD IN3
HD IN4
1080p, 6th-Order
SG Micro Corp
www.sg-micro.com
MARCH 2015 –REV. A. 3
4-Channel, 6th-Order Video
SGM9135
Filter Driver for SD/HD (1080p)
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM9135
YPMS10
XXXXX
MSOP-10
(Exposed Pad)
SGM9135
SGM9135YPMS10G/TR
Tape and Reel, 3000
-40℃ to +85℃
MARKING INFORMATION
NOTE: XXXXX = Date Code and Vendor Code.
X X X X X
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
Input Voltage.................................GND - 0.3V to VCC + 0.3V
Supply Voltage, VCC....................................................... 6.0V
Junction Temperature ..................................................150℃
Storage Temperature Range........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s) .............................260℃
ESD Susceptibility
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
HBM............................................................................ 8000V
MM................................................................................ 400V
ESD SENSITIVITY CAUTION
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range...................................3.1V to 5.5V
Operating Temperature Range ...................... -40℃ to +85℃
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
MARCH 2015
2
4-Channel, 6th-Order Video
SGM9135
Filter Driver for SD/HD (1080p)
PIN CONFIGURATION
(TOP VIEW)
SD IN
SD OUT
GND
1
2
3
4
5
10
9
VCC
HD IN1
HD IN2
HD IN3
Exposed
Pad
HD OUT1
HD OUT2
8
7
HD OUT3
6
MSOP-10 (Exposed Pad)
PIN DESCRIPTION
PIN
1
NAME
SD IN
VCC
FUNCTION
SD Video Input.
Power Supply.
2
3
HD IN1
HD IN2
HD IN3
HD OUT3
HD OUT2
HD OUT1
GND
HD Video Input for Channel 1.
HD Video Input for Channel 2.
HD Video Input for Channel 3.
4
5
6
Filtered HD Video Output for Channel 3.
Filtered HD Video Output for Channel 2.
Filtered HD Video Output for Channel 1.
Ground.
7
8
9
10
SD OUT
—
Filtered SD Video Output.
Exposed Pad
Exposed Pad. Can only be connected to GND or left floating.
SG Micro Corp
www.sg-micro.com
MARCH 2015
3
4-Channel, 6th-Order Video
SGM9135
Filter Driver for SD/HD (1080p)
ELECTRICAL CHARACTERISTICS
(TA = +25℃, VIN = 1VPP, VCC = 5V, RSOURCE = 37.5Ω; all inputs are AC-coupled with 0.1µF; all outputs are AC-coupled with 220µF
into 150Ω, referenced to 400kHz, unless otherwise noted.)
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
DC Electrical Characteristics
Operating Voltage Range (VCC
)
3.1
5
5.5
96
V
Quiescent Current (IQ)
VCC = 5.0V, No load
VIN = 0V, No load
RL = 150Ω
75
mA
SD channel
420
550
6.1
4.8
1.4
50
550
700
6.35
Output Level Shift Voltage (VOLS
)
mV
1080p channel
Voltage Gain (AV)
5.8
dB
V
Output Voltage High Swing
Video Input Voltage Range
VIN = 3V, RL = 150Ω to GND
Referenced to GND if DC-coupled
DC (All channels)
VPP
dB
Power Supply Rejection Ratio (PSRR)
Standard Definition Mode Electrical Characteristics
-0.1dB Bandwidth
-1dB Bandwidth
SD channel
6.4
7.6
8.5
50
MHz
MHz
MHz
dB
SD channel
-3dB Bandwidth
SD channel
Filter Response (Normalized Gain)
Slew Rate
SD channel, fIN = 400kHz to 27MHz
2V Output step, 80% to 20%
AC-AC coupled, PAL
34
V/μs
0.5
0.4
1.0
1.0
35
Differential Gain (DG)
Differential Phase (DP)
%
AC-DC coupled, PAL
AC-AC coupled, PAL
deg
AC-DC coupled, PAL
Group Delay Variation (D/DT)
Crosstalk (channel-to-channel)
Signal-to-Noise Ratio (SNR)
Fall Time
Difference between 400kHz and 6.5MHz
VOUT = 1.4VPP, f = 1MHz
100kHz to 5MHz
ns
dB
dB
ns
ns
%
-63
-66
34
2V Output step, 80% to 20%
2V Output step, 80% to 20%
f = 3.58MHz (Referenced to SDIN at 400kHz)
f = 3.58MHz (Referenced to SDIN at 400kHz)
Rise Time
36
Chroma Luma Gain (CLGSD
Chroma Luma Delay (CLDSD
1080p High Definition Mode Electrical Characteristics
)
102
8
)
ns
-0.1dB Bandwidth
-1dB Bandwidth
RL = 150Ω
78
86
MHz
MHz
MHz
dB
RL = 150Ω
-3dB Bandwidth
RL = 150Ω
98
Filter Response (Normalized Gain)
Slew Rate
fIN = 400kHz to 148MHz
2V Output step, 80% to 20%
Difference between 400kHz and 70MHz
VOUT = 1.4VPP, f = 1MHz
2V Output step, 80% to 20%
2V Output step, 80% to 20%
21
340
5.3
-64
3.3
3.6
V/μs
ns
Group Delay Variation (D/DT)
Crosstalk (channel-to-channel)
Fall Time
dB
ns
Rise Time
ns
SG Micro Corp
www.sg-micro.com
MARCH 2015
4
4-Channel, 6th-Order Video
SGM9135
Filter Driver for SD/HD (1080p)
TYPICAL PERFORMANCE CHARACTERISTICS
TA = +25℃, VIN = 1VPP, VCC = 5V, RSOURCE = 37.5Ω; all inputs are AC-coupled with 0.1µF; all outputs are AC-coupled with 220µF
into 150Ω, referenced to 400kHz, unless otherwise noted.
SD Gain vs. Frequency
1080p Gain vs. Frequency
3
0
3
0
-3
-3
-6
-6
-9
-9
-12
-15
-12
-15
0.1
1
10
100
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
SD Group Delay vs. Frequency
1080p Group Delay vs. Frequency
160
35
27
19
11
3
120
80
40
0
-40
-5
0.1
1
10
100
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
SD Large Signal Step Response
1080p Large Signal Step Response
1.50
1.00
1.50
1.00
0.50
0.50
0.00
0.00
-0.50
-1.00
-1.50
-0.50
-1.00
-1.50
-0.35 -0.15 0.05
0.25
0.45 0.65
0.85
-0.35 -0.15 0.05
0.25
0.45 0.65
0.85
Time (µs)
Time (µs)
SG Micro Corp
www.sg-micro.com
MARCH 2015
5
4-Channel, 6th-Order Video
SGM9135
Filter Driver for SD/HD (1080p)
TYPICAL PERFORMANCE CHARACTERISTICS
TA = +25℃, VIN = 1VPP, VCC = 5V, RSOURCE = 37.5Ω; all inputs are AC-coupled with 0.1µF; all outputs are AC-coupled with 220µF
into 150Ω, referenced to 400kHz, unless otherwise noted.
SD Small Signal Step Response
VIN = 0.1VPP
1080p Small Signal Step Response
VIN = 0.1VPP
0.15
0.10
0.15
0.10
0.05
0.05
0.00
0.00
-0.05
-0.10
-0.15
-0.05
-0.10
-0.15
-0.35 -0.15 0.05
0.25 0.45
Time (μs)
0.65 0.85
-0.35 -0.15 0.05
0.25
0.45 0.65
0.85
Time (μs)
SG Micro Corp
www.sg-micro.com
MARCH 2015
6
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
MSOP-10 (Exposed Pad)
D1
2.06
E1
E
E2
1.59 4.8
1.02
0.3
b
e
0.5
RECOMMENDED LAND PATTERN (Unit: mm)
D
L
A
A1
c
θ
A2
Dimensions In Millimeters
Symbol
MIN
MOD
MAX
1.100
0.150
0.950
0.280
0.230
3.100
2.416
3.100
5.050
1.730
A
A1
A2
b
0.820
0.020
0.750
0.170
0.080
2.900
1.700
2.900
4.750
1.450
-
-
-
-
c
-
D
-
D1
E
-
-
E1
E2
e
-
-
0.500 BSC
L
0.400
0°
-
-
0.800
8°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00017.001
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
MSOP-10
(Exposed Pad)
13″
12.4
5.20
3.30
1.20
4.0
8.0
2.0
12.0
Q1
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
13″
386
280
370
5
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明