1215764 [SICK]

SAFETY LIGHT CURTAINS;


型号：	1215764
厂家：	SICK AG
描述：	SAFETY LIGHT CURTAINS
文件：	总10页 (文件大小：295K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C4P-SA10530A001000, C4P-

EA10530A001000

deTec4 Prime

SAFETY LIGHT CURTAINS

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

Ordering information

System part

Sender

Type

Part no.

1215763

1215764

C4P-SA10530A001000

C4P-EA10530A001000

Receiver

Other models and accessories www.sick.com/deTec4_Prime

Detailed technical data

Features

Sender/receiver pair with system plug and QuickFix bracket

System part

As a standalone system and as last system in a cascade

Usage

30 mm

Resolution

1,050 mm

Protective field height

Scanning range

Minimum 0.15 m ... 24 m

Typical 0.15 m ... 30 m

11 ms ¹⁾

Response time

✔

No blind zones

Synchronization

Optical synchronisation

, without beam coding, no cascaded systems. Other response times see operating instructions.

Safety-related parameters

Type 4 (IEC 61496)

Type

SIL3 (IEC 61508)

SILCL3 (EN 62061)

Safety integrity level

Category 4 (EN ISO 13849)

PL e (EN ISO 13849)

Category

Performance level

PFH_D(mean probability of a dangerous fail-

ure per hour)

9.6 x 10^-9(EN ISO 13849)

1.9 x 10^-8(EN ISO 13849)

Single device

Cascade with one guest

2.9 x 10^-8(EN ISO 13849)

20 years (EN ISO 13849)

Cascade with two guest devices

T_M(mission time)

At least one OSSD is in the OFF state.

Safe state in the event of a fault

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

Online data sheet | 2017-08-21 16:38:06

Subject to change without notice

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

Functions

Delivery status

Deactivated

Uncoded

✔

Restart interlock

External device monitoring (EDM)

Beam coding

Automatic calibration of the protective field

width

Interfaces

System connection

Connection type Male connector M12, 5-pin

Flexi-Loop-ready

✔

Sender/receiver communication (COM1)

✔

Receiver power supply: 15 m ²⁾

Permitted cable length

All additional conductors at the system connection: 37.5 m

Configuration method

Cascade Automatic detection when starting the device

External device monitoring (EDM) Automatic detection when starting the device

Calibration of the protective field width Automatic detection when starting the device

Restart interlock Teach-in procedure when starting the device

Beam coding DIP switch

Reset to factory default DIP switch

LEDs

Status display

Fieldbus, industrial network

CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET ³⁾

Integration via Flexi Soft safety controller

Optional: To indicate the status on both sides, the COM1 connections from the sender and receiver must be connected to each other in the control cabinet.

If no inductive OSSD loads (e.g., contactors) are in use, the power supply cable for the receiver of a single device (no cascade) can be up to 30 m in length.

For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.

Electrical data

III (EN 50178) ¹⁾

Protection class

Supply voltage V_S

Ripple

24 V DC (19.2 V DC ... 28.8 V DC)

≤ 10 % ²⁾

3.56 W (DC) / 1.6 W (DC)ꢀ(depending on type)

Power consumption typical

Safety outputs (OSSD)

2 PNP semiconductors, short-circuit protected, cross-circuit monitored ³⁾

Type of output

Switching voltage HIGH 24 V DC (V_S– 2.25 V DC ... V_S)

Switching voltage LOW ≤ 2 V DC

Switching current ≤ 500 mA

SELV/PELV safety/protective extra-low voltage.

Within the limits of V .

Applies to the voltage range between –30 V and +30 V.

2017-08-21 16:38:06 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

Mechanical data

34 mm x 41.1 mm

Housing cross-section (incl. system connec-

tion)

Aluminum extruded profile

Housing material

Polycarbonate, scratch-resistant coating

Front screen material

Ambient data

IP65 (EN 60529)

IP67 (EN 60529)

Enclosure rating

–30 °C ... +55 °C

Ambient operating temperature

Storage temperature

Air humidity

–30 °C ... +70 °C

15 % ... 95 %, Non-condensing

5 g, 10 Hz ... 55 Hz (EN 60068-2-6)

10 g, 16 ms (EN 60068-2-29)

Vibration resistance

Shock resistance

Other information

850 nm

Wave length

✔

Integrated laser alignment aid

Light source Laser diode

Laser class 1 (IEC 60825-1)

Type of light Visible red light

Wave length 650 nm

Classifications

27272704

EC002549

46171620

ECl@ss 5.0

ECl@ss 5.1.4

ECl@ss 6.0

ECl@ss 6.2

ECl@ss 7.0

ECl@ss 8.0

ECl@ss 8.1

ECl@ss 9.0

ETIM 5.0

ETIM 6.0

UNSPSC 16.0901

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

Online data sheet | 2017-08-21 16:38:06

Subject to change without notice

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

Dimensional drawing (Dimensions in mm (inch))

30.7

(1.21)

29.5

(1.16)

(1.34)

300

450

313

463

600

613

750

763

900

913

1,050

1,200

1,350

1,500

1,650

1,800

1,950

2,100

1,063

1,213

1,362

1,512

1,662

1,812

1,962

2112

2017-08-21 16:38:06 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

Connection diagram

deTec4 Prime safety light curtain to UE10-3OS safety relay

+24 V

RES

n.c

EDM

n.c.

OSSD1

OSSD2

ADO

In2

In1

n.c.

0 V

B1 B3

Y1 13 23 33 41

Com1

deTec4 Prime

UE10-3OS

B2 B4

Y2 14 24 34 42

0 V

E132908/00/2015-04-07

3) PELV

① Output circuits. These contacts must be incorporated into the control such that the dangerous state is brought to an end if the output circuit is

open. For categories 4 and 3, they must be incorporated on two channels (x, y paths). Single-channel incorporation into the control (z path) is only

possible with a single-channel control and taking the risk analysis into account.

② To indicate the status on both sides, the Com1 connections from the sender and receiver must be connected to each other in the control cabi-

net (optional).

③ SELV/PELV safety/protective extra-low voltage.

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

Online data sheet | 2017-08-21 16:38:06

Subject to change without notice

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

deTec4 Prime safety light curtain cascade to UE10-3OS safety relay

+24 V

RES

+24 V

ADO

n.c.

+24 V

n.c.

OSSD1

OSSD2

EDM

In2

In1

0 V

Com1

B1 B3

Y1 13 23 33 41

UE10-3OS

B2 B4

Y2 14 24 34 42

deTec4 Prime

0 V

E132954/00/2015-04-07

4) PELV

① Output circuits. These contacts must be incorporated into the control such that the dangerous state is brought to an end if the output circuit is

open. For categories 4 and 3, they must be incorporated on two channels (x, y paths). Single-channel incorporation into the control (z path) is only

possible with a single-channel control and taking the risk analysis into account.

② Connection of the 5-pin extension connection of the host device to the 5-pin system connection of the guest device.

③ To indicate the status on both sides, the Com1 connections from the sender and receiver must be connected to each other in the control cabi-

net (optional).

④ SELV/PELV safety/protective extra-low voltage.

2017-08-21 16:38:06 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

deTec4 Prime safety light curtain with T-connector to UE48-2OS safety relay

+24 V

k1 k2

+24 V

OSSD1

OSSD2

0 V

+24 V

In2

In1

0 V

S33 S11 S12S31 A1 13 23 31

Com1

UE48-2OS2D2

deTec4 Prime

S34 S35 S21 S22 A2 14 24 32

0 V

3) PELV

E132906/00/2015-04-07

① Output circuits. These contacts must be incorporated into the control such that the dangerous state is brought to an end if the output circuit is

open. For categories 4 and 3, they must be incorporated on two channels (x, y paths). Single-channel incorporation into the control (z path) is only

possible with a single-channel control and taking the risk analysis into account.

② External device monitoring is only static.

③ SELV/PELV safety/protective extra-low voltage.

Task

Connection of a deTec4 Prime safety light curtain to a UE48-2OS safety relay. Operating mode: with restart interlock and external

device monitoring (EDM). The T-piece establishes a connection between the sender and the receiver.

Mode of operation

When the protective field is clear, the OSSD1 and OSSD2 outputs carry voltage. The system can be switched on when K1 and K2

are in a fault-free de-energized position. The UE48-2OS is switched on by pressing S1 (pushbutton is pressed and released). The

outputs (contacts 13-14 and 23-24) switch the K1 and K2 contactors on. When the protective field is interrupted, the OSSD1 and

OSSD2 outputs switch the UE48-2OS off. Contactors K1 and K2 are switched off.

Fault analysis

Cross-circuits and short-circuits of the OSSD1 and OSSD2 outputs are recognized and lead to the locking state (lock-out). A mal-

function with one of the K1 or K2 contactors is detected. The shut-down function is retained. In the event of manipulation (e.g.,

jamming) of the S1 pushbutton, the UE48-2OS will not re-enable the output current circuits.

Task

Connection of two deTec4 Prime safety light curtains to a UE10-3OS safety relay. Operating mode: without restart interlock, with ex-

ternal device monitoring (EDM). If required, the restart interlock is implemented via the machine controller.

Mode of operation

If the protective field is clear and the UE10-3OS is in a fault-free de-energized position, the system is enabled. Outputs OSSD1 and

OSSD2 carry voltage, the UE10-3OS is switched on. When the protective field is interrupted, the OSSD1 and OSSD2 outputs switch

the UE10-3OS off.

Fault analysis

Cross-circuits and short-circuits of the OSSDs are recognized and lead to the locking state (lock-out). The malfunction of the

UE10-3OS is detected. The shut-down function is retained.

Task

Connection of a deTec4 Prime safety light curtain to a UE10-3OS safety relay. Operating mode: with restart interlock, external de-

vice monitoring (EDM), and application diagnostic output.

Mode of operation

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

Online data sheet | 2017-08-21 16:38:06

Subject to change without notice

C4P-SA10530A001000, C4P-EA10530A001000 | deTec4 Prime

SAFETY LIGHT CURTAINS

If the protective field is clear and the UE10-3OS is in a fault-free de-energized position, the field indicator and the H2 lamp flash.

The system can be switched on. The system is enabled by pressing S1 (pushbutton is pressed and released). Outputs OSSD1 and

OSSD2 carry voltage, the UE10-3OS is switched on. When the protective field is interrupted, the OSSD1 and OSSD2 outputs switch

the UE10-3OS off.

Fault analysis

Cross-circuits and short-circuits of the OSSDs are recognized and lead to the locking state (lock-out). The malfunction of the

UE10-3OS is detected. The shut-down function is retained. Manipulation (e.g., jamming) of the S1 pushbutton prevents the output

circuits from being enabled.

2017-08-21 16:38:06 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

SICK Aꢀ A GꢁAꢂCꢃ

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-

tions. A unique range of products and services creates the perfect basis for controlling processes securely

and efﬁciently, protecting individuals from accidents and preventing damage to the environment.

We have extensive experience in a wide range of industries and understand their processes and require-

ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in

Europe, Asia and North America, system solutions are tested and optimized in accordance with customer

speciﬁcations. All this makes us a reliable supplier and development partner.

Comprehensive services complete our offering: SICK ꢁifeꢀime Services provide support throughout the ma-

chine life cycle and ensure safety and productivity.

For us, that is “Sensor Intelligence.”

WOꢄꢁꢅWIꢅꢃ ꢆꢄꢃSꢃꢂCꢃ:

Contacts and other locations www.sick.com

SICK AG | Waldkirch | Germany | www.sick.com

1215764 [SICK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E