6034863 [SICK]

SINGLE-BEAM PHOTOELECTRIC SAFETY SWITCHES;


型号：	6034863
厂家：	SICK AG
描述：	SINGLE-BEAM PHOTOELECTRIC SAFETY SWITCHES
文件：	总6页 (文件大小：1799K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

L41S-33MA2A, L41E-33MA2A

L41

SINGLE-BEAM PHOTOELECTRIC SAFETY SWITCHES

L41S-33MA2A, L41E-33MA2A | L41

SINGLE-BEAM PHOTOELECTRIC SAFETY SWITCHES

Ordering information

System part

Type

Part no.

6034863

6034862

Sender

L41S-33MA2A

L41E-33MA2A

Receiver

Other models and accessories www.sick.com/L41

Detailed technical data

Features

0 m ... 60 m

Scanning range

Number of beams

Optical axis

Axial

Safety-related parameters

Type 4 (IEC 61496) ¹⁾

Type

SIL3 (IEC 61508) ¹⁾

SILCL3 (EN 62061) ¹⁾

Safety integrity level

Category 4 (EN ISO 13849) ¹⁾

PL e (EN ISO 13849) ¹⁾

Category

Performance level

8.1 x 10^-10(EN ISO 13849) ¹⁾

PFH_D(mean probability of a dangerous fail-

ure per hour)

20 years (EN ISO 13849)

T_M(mission time)

Only in combination with an appropriate test device, e.g., Flexi Classic or Flexi Soft.

Interfaces

Male connector M12, 4-pin, angled

Connection type

LED

Diagnostic display

Electrical data

Operating data

III

Protection class

≤ 30 mA / ≤ 20 mAꢀ(depending on type)

≤ 70 mA

Power consumption

Switching output

Switching current

Mechanical data

Design

Cylindrical

M30 x 100 mm

Nickel-plated brass

Glass

Dimensions (diameter x length)

Housing material

Lens material

212 g

Weight

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

Online data sheet | 2017-09-01 12:26:26

Subject to change without notice

L41S-33MA2A, L41E-33MA2A | L41

SINGLE-BEAM PHOTOELECTRIC SAFETY SWITCHES

Ambient data

IP67 (EN 60529)

–40 °C ... +55 °C

–40 °C ... +75 °C

Enclosure rating

Ambient operating temperature

Storage temperature

Air humidity

15 % ... 95 %, Non-condensing

5 g, 10 Hz ... 55 Hz (IEC 60068-2-6)

10 g, 16 ms (IEC 60068-2-29)

Vibration resistance

Shock resistance

Other information

LED

Light source

Visible red light

660 nm

Type of light

Wave length

± 2.5° / ± 2.5°

Aperture angle/receiving angle

Classifications

27272701

EC001831

46171620

ECl@ss 5.0

ECl@ss 5.1.4

ECl@ss 6.0

ECl@ss 6.2

ECl@ss 7.0

ECl@ss 8.0

ECl@ss 8.1

ECl@ss 9.0

ETIM 5.0

ETIM 6.0

UNSPSC 16.0901

Dimensional drawing (Dimensions in mm (inch))

M30 axial

100 (3.94)

11.5

88.5 (3.48)

(0.45)

62 (2.44)

LED

SW 36

(0.20)

(0.67)

M12 x 1

2017-09-01 12:26:26 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

L41S-33MA2A, L41E-33MA2A | L41

SINGLE-BEAM PHOTOELECTRIC SAFETY SWITCHES

Connection diagram

3 x L41 (cascaded) on Flexi Classic main unit and extension unit

+24 V

0 V

+24 V

0 V

L41S

L41E

+24 V

0 V

+24 V

0 V

A1 X1 X2 S1 S2 S3

Function

L41 E

L41S

UE410-MU/XU

I4 A2 Q1 Q2 Q3 Q4 EN

+24 V

0 V

+24V

0 V

L41S

L41E

k1 k2

0 V

E117081/00/2014-06-02

2) PELV

Task

Integration of three cascaded L4000 (L41) family single-beam photoelectric safety switches with a UE410-MU/XU safety controller

into a relay controller/contactor controller.

Operating mode: with restart interlock and with external device monitoring.

Function

When the input conditions are valid, the system is ready for switch-on and waits for an input signal/switch-on signal. The system is

enabled by pressing and releasing the S1 button. The related output on the UE410-MU/XU carries power. If the input conditions are

no longer met, the related outputs on the UE410-MU/XU shut down.

Possible faults

The incorrect function of the K1 and K2 contactors will be detected. The shutdown function is retained.

On manipulation (e.g., jamming) of the S1 button, the system does not enable the output current circuits.

Comments

¹⁾Output circuits: These contacts are to be connected to the controller such that, with the output circuit open, the dangerous state

is disabled. For categories 4 and 3, the integration must be dual-channel (x/y paths). Single-channel integration in the control (z

path) is only possible with a single-channel control and by taking the risk analysis into account.

²⁾PELV as required in EN 60204-1 / 6.4

Optical short-circuits must be avoided. Take note of the operating instructions for the integrated devices. The safety-related para-

meters (safety integrity level and response time) are dependent on the types used.

Recommended accessories

Other models and accessories www.sick.com/L41

Brief description

Type

Part no.

Mounting brackets and plates

Mounting bracket for M30 sensors, steel, zinc coated, without mounting hardware

BEF-WN-M30

5308445

Plug connectors and cables

Head A: female connector, M12, 4-pin, straight

Head B: cable

Cable: PVC, unshielded, 5 m

DOL-1204-G05M

DOL-1204-W05M

6009866

6009867

Head A: female connector, M12, 4-pin, angled

Head B: cable

Cable: PVC, unshielded, 5 m

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

Online data sheet | 2017-09-01 12:26:26

Subject to change without notice

L41S-33MA2A, L41E-33MA2A | L41

SINGLE-BEAM PHOTOELECTRIC SAFETY SWITCHES

Brief description

Type

Part no.

Head A: female connector, M12, 4-pin, straight

DOS-1204-G

6007302

Head B: -

Cable: unshielded

Head A: female connector, M12, 4-pin, angled

Head B: -

DOS-1204-W

6007303

Cable: unshielded

Alignment aids

Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look into

the beam!

AR60

1015741

5311529

Adapter AR60 for M30 sensors (L4000 Systems, L41 and L21)

AR60 adapter,

M30 sensors

Deflector mirrors

Horizontal deflection, 75 mm x 80 mm reflector surface, Glass, Incl. mounting kit (2 x

swivel mount)

PNS75-008

PSK1

1026647

1005229

5306053

Horizontal deflection, 96 mm x 124 mm reflector surface, Glass

Deflector mirror for 90° deflection, mirror surface 97 mm x 80 mm, not suitable for

column mounting, Glass, mounting hardware included

PSK45

2017-09-01 12:26:26 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

SICK Aꢀ A GꢁAꢂCꢃ

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-

tions. A unique range of products and services creates the perfect basis for controlling processes securely

and efﬁciently, protecting individuals from accidents and preventing damage to the environment.

We have extensive experience in a wide range of industries and understand their processes and require-

ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in

Europe, Asia and North America, system solutions are tested and optimized in accordance with customer

speciﬁcations. All this makes us a reliable supplier and development partner.

Comprehensive services complete our offering: SICK ꢁifeꢀime Services provide support throughout the ma-

chine life cycle and ensure safety and productivity.

For us, that is “Sensor Intelligence.”

WOꢄꢁꢅWIꢅꢃ ꢆꢄꢃSꢃꢂCꢃ:

Contacts and other locations www.sick.com

SICK AG

| Waldkirch | Germany | www.sick.com

相关型号：