PE310G2SPB32-XR [SILICOM]

Dual port Fiber 10 Gigabit Ethernet PCI Express Server Adapter;
PE310G2SPB32-XR
型号: PE310G2SPB32-XR
厂家: Silicom    Silicom
描述:

Dual port Fiber 10 Gigabit Ethernet PCI Express Server Adapter

PC
文件: 总5页 (文件大小:556K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PE310G2SPB32 Server Adapter  
Dual port Fiber 10 Gigabit Ethernet PCI Express Server Adapter Broadcom® Based  
Product Description  
Silicom’s 10 Gigabit Ethernet PCI Express server  
adapters are designed for Servers and high-end  
appliances. The Silicom 10 Gigabit Ethernet PCI  
Express Server adapters offer simple integration into  
any PCI Express X8 to 10 Gigabit Networks. The  
performance is optimized so that system I/O is not the  
bottleneck in high-performance networking  
applications.  
The Silicom 10 Gigabit Ethernet PCI Express server adapters are based on Broadcom BCM57302 Ethernet controller  
with fully integrated Gigabit Ethernet Media Access Control (MAC) and SFI Interface. In addition to managing MAC  
and PHY Ethernet layer functions, the controller manages PCI  
Express packet traffic across its transaction, link, and physical/logical  
layers. Using hardware acceleration, the controller offloads tasks from  
the host, such as TCP/UDP/IP checksum calculations and TCP  
segmentation.  
Silicom’s 10 Gigabit Ethernet PCI-Express Server adapters are the  
ideal solution for implementing multiple network segments, mission-  
critical high-powered networking applications and environments within  
high performance servers.  
Key Features  
SFP+ 10Gigabit Ethernet:  
10Gigabit Ethernet Adapter with SFP cage support:  
-SR: Fiber 10 Gigabit Ethernet 10GBASE-SR:  
o
10GBASE-SR with 10Gigabit 850nM Small form Factor Pluggable (SFP+)  
-LR: Fiber 10 Gigabit Ethernet 10GBASE-LR:  
o
10GBASE-LR with 10Gigabit 1310nM Small form Factor Pluggable (SFP+)  
-SR: Fiber 1/10 Gigabit Ethernet 10GBASE-SR:  
1Page  
Silicom Ltd. Connectivity Solutions  
o
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)  
-LR: Fiber 1/10 Gigabit Ethernet 10GBASE-LR:  
10 Gigabit Fiber Ethernet port supports 10GBASE-LR (1310nM LAN PHY)  
o
Common Key features:  
Host Interface:  
o
PCI Express x8,  
o
o
o
Support PCI Express Base Specification 3.0 (8GT/sec)  
Vendor ID = 0x14E4  
Device ID = 0x16CA  
Performance Features:  
Function Level Reset (FLR) support  
Message Signal Interrupt (MSI-X)  
Support Jumbo frames, up to 9.6kB  
Single Root I/O Virtualization (SR-IOV)  
802.1q VLAN tagging  
LAN Features and Virtualization features:  
RDMA over Converged Ethernet (RoCE)  
Stateless Offloads  
Datacenter Bridging (lossless Ethernet)  
Congestion Avoidance  
TruManage™  
TruFlow™  
Network Controller Sideband Interface (NC-SI)  
IEEE 1588 PTP (Precision Timing Protocol)  
IEEE 802.1AS standard  
NetQueue  
VMQueue  
VXLAN  
NVGRE/Geneve/IP-in-IP/GRE-aware stateless offloads  
Stateless Transport Tunneling.  
802.3x flow control  
Link Aggregation (802.3ad)  
Configurable Flow Acceleration  
2Page  
Silicom Ltd. Connectivity Solutions  
Congestion Avoidance  
Ethernet Audio/Video  
TCP/IP/L2 features:  
Large Send Offload  
Receive side scaling (RSS)  
IP/TCP/UDP checksum  
IPv4, IPv6  
Receive Segment Coalescing  
Generic Receive Offload  
Header-Payload Split  
LEDs indicator for link/Activity  
Technical Specifications  
-SFP+ 10Gigabit Ethernet Technical Specifications Adapters:  
SFI interfaces supports 10GBase-R PCS and 10 Gigabit PMA in order to  
SFP+ (Small Form Factor  
Pluggable) supports:  
connect with SFP+ to 10GBase-SR / / 1000Base-SX / 10GBase-LR and SFP+  
Direct Attach  
10GBase-SR SFP+:  
IEEE Standard / Network  
topology:  
Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY).  
10GBase-SR SFP+:  
Data Transfer Rate :  
10.3125GBd  
62.5um, 160MHz/Km 26m  
10GBase-SR SFP+:  
Cables and Operating distance  
Up to:  
62.5um, (OM1)200MHz/Km 33m  
50um, 400MHz/Km 66m  
50um, (OM2)500 MHz/Km 82m  
50um, (OM3)2000MHz/Km 300m  
10GBase-LR SFP+:  
IEEE Standard / Network  
topology:  
Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)  
10GBase-LR SFP+:  
Data Transfer Rate:  
10.3125GBd  
10GBase-LR SFP+:  
Cables and Operating distance  
Up to:  
Single-Mode: 10000m at 9um  
3Page  
Silicom Ltd. Connectivity Solutions  
10GSFP+Cu :  
IEEE Standard / Network  
topology:  
Copper 10Gigabit Ethernet, 10GSFP+Cu (Direct Attach)  
SR: Fiber 10GBASE-SR Technical Specifications:  
Output Transmit Power (10G):  
Minimum: -5 dBm  
Optical Receive Sensitivity  
(10G):  
Maximum: -11.1 dBm  
Maximum: +0.5dBm  
Maximum Input Power (10G):  
LR: Fiber 10GBASE-LR Technical Specifications:  
Output Transmit Power (10G):  
Minimum: -8.2 dBm  
Maximum: -12.5 dBm  
Maximum: +0.5dBm  
Optical Receive Sensitivity  
(10G):  
Maximum Input Power (10G):  
Operating Systems Support  
Operating system support:  
Linux  
General Technical Specifications  
Interface Standard:  
PCI-Express Base Specification Revision 3.0(8 GTs)  
Low profile height short add-in card: 167.64mm X 64.389mm (6.60”X 2.535”)  
X8 Lane  
Board Size:  
PCI Express Card Type:  
+3.3VAUX ±9%,  
+12V ± 8%  
PCI Express Voltage:  
PCI Connector:  
Controller:  
Gold Finger: X8 Lane  
Broadcom BCM57302  
Metal Bracket  
Holder:  
Operating Humidity:  
0%90%, non-condensing  
4Page  
Silicom Ltd. Connectivity Solutions  
Operating Temperature:  
Storage:  
0°C 45°C (32°F 113F)  
-40°C65°C (-40°F149°F)  
Regulation:  
LEDs  
Card shall meet CE, FCC Class B, ROHS requirements.  
Each Port has 2 LEDs to indicate link status and speed  
Link: Physical link Speed:  
LEDs:  
Red stay on physical link on with 25G Speed  
Off physical link off Link/ACT: Logic Link/Activity, Green  
Green blinking logic link up, activity  
LEDs location:  
Connector:  
LED is located on the PCB, visible via holes in the metal bracket holder  
(2) SFP+ Cages  
Order Information  
P/N  
Description  
Notes  
X8 Gen 3, based on Broadcom  
Dual port Fiber SFP+10 Gigabit Ethernet PCI  
Express Server Adapter  
PE310G2SPB32-XR  
BCM57302, Support Silicom SFP+  
approved transceiver, RoHS Compliant  
X8 Gen 3, based on Broadcom  
BCM57302, on board support for Fiber  
SR, RoHS Compliant  
Dual port Fiber (SR) 10 Gigabit Ethernet PCI  
Express Server Adapter  
PE310G2SPB32-SR  
PE310G2SPB32-LR  
X8 Gen 3, based on Broadcom  
BCM57302, on board support for Fiber  
LR, RoHS Compliant  
Dual port Fiber (LR) 10 Gigabit Ethernet PCI  
Express Server Adapter  
1V0  
5Page  
Silicom Ltd. Connectivity Solutions  

相关型号:

PE310G2SPT10

Dual Port SFP 10 Gigabit Ethernet PCI Express Server Adapter
SILICOM

PE310G2SPT10-LR

Dual Port SFP 10 Gigabit Ethernet PCI Express Server Adapter
SILICOM

PE310G2SPT10-SR

Dual Port SFP 10 Gigabit Ethernet PCI Express Server Adapter
SILICOM

PE310G2SPT10-XR

Dual Port SFP 10 Gigabit Ethernet PCI Express Server Adapter
SILICOM

PE310G4BPI9

Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter
SILICOM

PE310G4BPI9-LR-SD

Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter
SILICOM

PE310G4BPI9-LRD-SD

Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter
SILICOM

PE310G4BPI9-SR-SD

Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter
SILICOM

PE310G4BPI9-SR5-SD

Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter
SILICOM

PE310G4BPI9-SRD-SD

Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter
SILICOM

PE310G4I71L

Quad Port Fiber SFP 10 Gigabit Ethernet PCI Express Server Adapter
SILICOM

PE310G4I71L-LRD

Quad Port Fiber SFP 10 Gigabit Ethernet PCI Express Server Adapter
SILICOM