PE310G4BPI9-LRD-SD [SILICOM]
Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter;型号: | PE310G4BPI9-LRD-SD |
厂家: | Silicom |
描述: | Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter |
文件: | 总10页 (文件大小:818K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PE310G4BPI9 Bypass Card
Quad Port Fiber 10 Gigabit Ethernet Bypass Server Adapter Intel® 82599ES Based
Product Description
Silicom’s quad port fiber 10Gigabit Ethernet Bypass server adapter is a
PCI-Express X8 network interface card that contains four 10 Gigabit
Ethernet ports on a PCI-E adapter.
The Silicom’s quad port fiber 10 Gigabit Ethernet Bypass server adapter is
targeted to inline network system that maintains network connectivity when
system fails.
Silicom’s quad port fiber 10 Gigabit Ethernet Bypass server adapter supports Normal, Bypass and Disconnect modes. In Normal
mode, the ports are independent interfaces. In Bypass mode, all packets received from one port are transmitted to the adjacent
port. In Disconnect mode, the adapter simulates switch / rout cable disconnection.
Silicom’s quad port fiber 10 Gigabit Ethernet Bypass server adapter can Bypass or disconnect its Ethernet ports on a host system
failure, power off, or upon software request.
In Bypass mode, the connections of the Ethernet ports are disconnected from the system and switched over to the other port to
create a crossed connection loop-back between the Ethernet ports. Hence, in bypass mode all packets received from one port are
transmitted to the adjacent port and vice versa.
This feature enables to bypass a failed system and provides maximum up
time for the network.
Silicom’s quad port fiber 10 Gigabit Ethernet Bypass server adapter
includes an on board WDT (Watch Dog Timer) controller. The adapter’s
software drivers or software application can write commands to the on
board WDT controller.
The adapter’s software drivers, WDT controller and the Bypass circuitry provide an interface that control and manage the mode of
the adapter. The Silicom 10 Gigabit Ethernet Bypass server adapters are based on Intel 82599ES Ethernet controllers.
1Page
Silicom Ltd. Connectivity Solutions
Key Features
Bypass / Disconnect:
Bypass / Disconnect Ethernet ports on Power Fail, System Hangs or Software Application Hangs
Software programmable Bypass, Disconnect or Normal Mode
On Board Watch Dog Timer (WDT) Controller
Software programmable time out interval
Software Programmable WDT Enable / Disable counter
Software programmable Bypass Capability Enable / Disable
Software Programmable Disconnect Capability Enable / Disable
Software Programmable mode (Bypass, Normal or Disconnect mode) at Power up
Software Programmable mode (Bypass, Normal mode) at Power off
Independent Bypass operation in every two ports
Emulates standard NIC
Fiber 10 Gigabit Ethernet 10GBASE-SR:
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
10Gigabit 850nM Small form Factor Pluggable (SFP+)
Fiber 10 Gigabit Ethernet 10GBASE-LR:
10 Gigabit Fiber Ethernet port supports 10GBASE-LR (1310nM LAN PHY)
10Gigabit 1310nM Small form Factor Pluggable (SFP+)
-SRD: Fiber 1/10 Gigabit Ethernet 1000Base-SX / 10GBASE-SR:
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
1Gigabit Fiber Ethernet port supports 1000BASE-SX (850nM LAN PHY)
1/10Gigabit 850nM Small form Factor Pluggable (SFP+) •
-LRD: Fiber 1/10 Gigabit Ethernet 1000Base-LX / 10GBASE-LR:
10 Gigabit Fiber Ethernet port supports 10GBASE-LR (1310nM LAN PHY)
1Gigabit Fiber Ethernet port supports 1000BASE-LX (1310nM LAN PHY)
1/10Gigabit 1310nM Small form Factor Pluggable (SFP+)
Fiber 10 Gigabit Ethernet 10GBASE-SR5 (SR 50uM):
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
10Gigabit 850nM Small form Factor Pluggable (SFP+)
2Page
Silicom Ltd. Connectivity Solutions
Performance Features:
IPV4 and IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload
Fragmented UDP checksum offload for Packet Reassembly
CPU utilization- the 82599 supports reduction in CPU utilization, mainly by supporting Receive Side Coalescing (RSC)
Support for 16 virtual machine Device Queues (VMDq) per port
Support Direct Cache Access (DCA)
Advanced memory architecture reduces latency by preceding TSO packets. A TSO packet may be interleaved with other
packets going to the wire
Minimized number of device I/O interrupts using MSI and MSI-X
Offload of TCP / IP / UDP checksum calculation and TCP segmentation
Large on chip receive packet buffer (512 KB)
Large on chip transmit packet buffer (160KB)
Jumbo Frame (up to 16KB)
Host Interface:
PCI Express X8 lanes
Support PCI Express Base Specification 3.0 (8GT/s)
Technical Specifications
Bypass Specifications
3,276,800 mSec (3,276.8 Sec): Maximum
100 mSec ( 0.1 Sec) : Minimum
WDT Interval (Software
Programmable):
WDT Interval = (2^wdt_interval_parameter)*(0.1) sec.
wdt_interval_parameter: { Valid Range: 0-15}
Fiber 10 Gigabit Ethernet Technical Specifications – (10GBASE-SR) Adapters:
IEEE Standard / Network
Fiber Gigabit Ethernet, 1000Base-SX (850nM)
topology:
Data Transfer Rate:
10.3125GBd
Multimode fiber:
Cables and Operating
distance:
62.5um, 160MHz/Km 13m*
62.5um, (OM1)200MHz/Km 16.5m *
* Defined as half as the distance as specified in the optical transceiver
Up to:
3Page
Silicom Ltd. Connectivity Solutions
Normal Mode (Bypass Off):
Optical Output Power:
Typical: -2.61 dBm (TX –Switch Normal – Fiber – LC/LC)
Minimum: -7.3 dBm
Normal Mode (Bypass Off)
Typical: -15 dBm
Optical Receive Sensitivity:
Maximum: -11.1 dBm
Bypass Mode:
Insertion loss (Optical Power attenuation between TX to RX) (LC- fiber- switch- LC)
Typical: 0.99 dB (From RX to TX)
Insertion Loss:
Maximum 1.9 dB
Fiber 10 Gigabit Ethernet Technical Specifications – (10GBASE-LR) Adapters:
IEEE Standard / Network
Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)
topology:
Data Transfer Rate:
10.3125GBd
Cables and Operating
distance:
Single-Mode: 5Km at 9um *
* Defined as half as the distance as specified in the optical transceiver
Up to:
Normal Mode (Bypass Off):
Optical Output Power:
Typical: -5.02 dBm (TX –Switch Normal – Fiber – LC/LC)
Minimum: -7.3 dBm
Normal Mode (Bypass Off)
Typical: -13.9 dBm
Optical Receive Sensitivity:
Maximum: -11.1 dBm
Bypass Mode:
Insertion loss (Optical Power attenuation between TX to RX) (LC- fiber- switch- LC)
Typical: 0.69 dB (From RX to TX)
Insertion Loss:
Maximum 1.6 dB
– SRD: Fiber 1000BASE-SX / 10GBASE-SR Technical Specifications:
Optical Output Power (1G):
Minimum: -10.9 dBm
Optical Receive Sensitivity
(1G):
Maximum: -15.6 dBm
4Page
Silicom Ltd. Connectivity Solutions
Insertion Loss (1G)
Maximum: +1.9 dBm
Minimum: -7.3 dBm
Output Transmit Power (10G):
Optical Receive Sensitivity
(10G):
Maximum: -11 dBm
Maximum: 1.6 dBm
Insertion Loss (10G):
– LRD: Fiber 1000BASE-LX / 10GBASE-LR Technical Specifications:
Optical Output Power (1G):
Minimum: -10.8 dBm m
Optical Receive Sensitivity
(1G):
Maximum: -19 dBm
Insertion Loss (1G):
Maximum: +0.5dBm
Minimum: -5.2dBm
Output Transmit Power (10G):
Optical Receive Sensitivity
(10G):
Maximum: –12.6 dBm
Insertion Loss (10G):
Maximum: +0.5 dBm
Fiber Gigabit Ethernet Technical Specifications – (10GBASE-SR5) (50uM) Adapters:
IEEE Standard / Network
Fiber Gigabit Ethernet, 1000Base-SR (850nM)
topology:
Data Transfer Rate:
10.3125GBd
Multimode fiber:
Cables and Operating
distance:
50um, 400MHz/Km 33m *
50um, (OM2)500 MHz/Km 41m *
50um, (OM3)2000MHz/Km 150m*
*Defined as half as the distance as specified in the optical transceiver
Up to:
Normal Mode (Bypass Off):
Optical Output Power:
Typical: -2.95 dBm (TX Switch Normal – Fiber – LC/LC)
Minimum: -3 dBm
Normal Mode (Bypass Off)
Typical: -14.79 dBm
Optical Receive Sensitivity:
5Page
Silicom Ltd. Connectivity Solutions
Maximum: -11.1dBm
Bypass Mode:
Insertion loss (Optical Power attenuation between TX to RX) (LC- fiber- switch- LC)
Maximum 1.9 dB
Insertion Loss:
Typical: 1.3 dB (From RX to TX)
Operating Systems Support
Windows
Linux
FreeBSD
VMware
Hyper-V
Operating system support:
General Technical Specifications
Interface Standard:
PCI-Express Base Specification Revision 3.0 (8 GTs)
Board Size:
PCI Express Card Type:
PCI Express Voltage:
PCI Connector:
Controller:
Standard height long add-in card 241.3mm X 110.13mm (9.5”X 4.336”)
X8 Lane
+12V +- 8%
Gold Finger: X8 Lane
Intel 82599ES
Holder:
Metal Bracket
I/O:
LC located on internal bracket
460 gram (16.227 oz)
Weight:
17.64 W, 1.47 A at 12V: Typical all ports operate at 10Gb/s, (Normal Mode).
16.8 W, 1.4 A at 12V: Typical Bypass Mode.
Power Consumption (SR):
16.92 W, 1.41 A at 12V: Typical Disconnect Mode.
17.28 W, 1.44 A at 12V: Typical No link at all ports
18.24 W, 1.52 A at 12V: Typical all ports operate at 10Gb/s, (Normal Mode).
17.4 W, 1.45 A at 12V: Typical Bypass Mode.
Power Consumption (SR5):
17.52 W, 1.46 A at 12V: Typical Disconnect Mode.
6Page
Silicom Ltd. Connectivity Solutions
18 W, 1.5 A at 12V: Typical No link at all ports
18.84 W, 1.57 A at 12V: Typical all ports operate at 10Gb/s, (Normal Mode).
16.56 W, 1.38 A at 12V: Typical Bypass Mode.
Power Consumption (LR):
16.92W, 1.41 A at 12V: Typical Disconnect Mode.
18.24 W1.52 A at 12V: Typical No link at all ports
Operating Humidity:
Operating Temperature:
Storage:
0%–90%, non-condensing
0°C – 45°C (32°F – 113°F)
-40°C–65°C (-40°F–149°F)
FCC Part 15, Subpart B Class A
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
EMC Certifications:
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
33 (Years)
MTBF*:
** According to Telcordia SR-332 Issue 2. Environmental condition – GB (Ground, Fixed, and
7Page
Silicom Ltd. Connectivity Solutions
Controlled). Ambient temperature 40°C
LEDs
(2) LEDs per port
Left LED: Link:
Turns on link 10G (Blue),
Right LED : Act:
LEDs:
Blinks on activity (Green) :
(1) Bi- color LED per segment (2 ports):
Off on Normal Mode
Turns on Bypass Mode (Green)
/ Turns on Disconnect Mode (Yellow)
LEDs are located on the PCB, visible via holes in the metal bracket.
Each 4 green act and blue 10G link LEDs (2 LEDs per port) are located under their own LC
connector port. (Each LC contains 2 ports).
LEDs location:
The yellow/ green for disconnect and bypass LED is located between the 2 ports in each
segment- in the middle under each LC.
Connectors:
(2) LC
Functional Description
Silicom’s Bypass Server adapters support Normal, Bypass and Disconnect modes.
In Normal mode, the ports are independent interfaces (see Figure 1: Normal mode, one Bypass pair is illustrated).
Figure 1: Normal Mode Functional Block Diagram
8Page
Silicom Ltd. Connectivity Solutions
In Bypass mode, the connections of the Ethernet network ports are Disconnected from the interfaces and switched over to the other
port to create a crossed connection loop-back between the Ethernet ports. The connections of the interfaces are left not connected.
(See Figure 2: one Bypass pair illustrated)
Figure 2: Bypass Mode Functional Block Diagram
In Disconnect mode, the transmit connections of the Ethernet network ports are Disconnected from the interfaces. (See Figure 3:
one Bypass pair illustrated)
Figure 3: Disconnect Mode Functional Block Diagram
Silicom Bypass server adapters include an on board Controller that can Bypass the Ethernet ports on host system failure like
Power Off, System hangs or software application hangs. The software programmable Watch Dog Timer (WDT) Controller detects a
host system fails and it will Bypass automatically the Ethernet ports after programmable time out interval. The WDT Controller can
be software programmable enabled or disabled.
9Page
Silicom Ltd. Connectivity Solutions
Silicom Bypass server adapters support software programmable to select Bypass or Normal mode. In Normal mode, the ports of
the adapters remain independently operational.
The drivers of the adapters and the Bypass circuitry provides an interface that control and management the mode of the adapter.
The adapter software driver or software application can writes commands to the on board controller. The on board controller
processes the commands and activates the bypass circuitry accordingly.
After power up the default mode of the adapter is to be in Bypass mode. After driver is loaded, the adapter software driver or
application can set the card to a Normal mode. After the Host system issues reset, setting of Bypass controller and circuitry are
reserved.
Silicom Bypass server adapters support Disable Bypass Capability; hence, if those adapters receive Disable Bypass Capability
command, the adapter does not Bypass its Ethernet ports, in this state the four Ethernet ports are independent. The Disable
Bypass Capability state is reserved also after power off. This feature enables to emulate a standard NIC.
Silicom Bypass server adapters can be set to Bypass or Normal mode at power up. This setting programmable and is reserved also
after power off.
Order Information
P/N
Description
Notes
Quad Port Fiber (SR) 10 Gigabit Ethernet Bypass
Server Adapter
X8, Based on Intel 82599ES, PCI-E adapter, on
board support for Fiber SR, RoHS compliant
PE310G4BPI9-SR-SD
Quad Port Fiber (LR) 10 Gigabit Ethernet Bypass
Server Adapter
X8, Based on Intel 82599ES, PCI-E adapter, on
board support for Fiber LR, RoHS compliant
PE310G4BPI9-LR-SD
PE310G4BPI9-SRD-SD
PE310G4BPI9-LRD-SD
Quad Port Fiber (SX/SR) 10 Gigabit Ethernet PCI
Express Bypass Server Adapter
X8 Gen 3, Based on Intel 82599ES, on board
support for Fiber SX/SR, RoHS compliant
Quad Port Fiber (LX/LR) 10 Gigabit Ethernet PCI
Express Bypass Server Adapter
X8 Gen 3, Based on Intel 82599ES, on board
support for Fiber LX/LR, RoHS compliant
X8, Based on Intel 82599ES, PCI-E adapter, on
board support for Fiber SR (50 uM), RoHS
compliant
Quad Port Fiber (SR- 50 uM) 10 Gigabit Ethernet
Bypass Server Adapter
PE310G4BPI9-SR5-SD
1V4
10Page
Silicom Ltd. Connectivity Solutions
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明