AP132-317 [SKYWORKS]
3 V InGaP DCS Power Amplifier; 3 V的InGaP DCS功率放大器
| 型号： | AP132-317 |
| 厂家： | 
SKYWORKS SOLUTIONS INC. |
| 描述： | 3 V InGaP DCS Power Amplifier |
| 文件： | 总3页 (文件大小：32K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Preliminary
3 V InGaP DCS Power Amplifier
AP132-317
Features
■ Single Supply, 3.2 V Nominal
Operating Voltage
-317
0.157
(4.00 mm) BSC
0.079
(2.00 mm)
0.148
0.058
(1.47mm)
(3.75 mm)
BSC
■ DCS1800 and PCS1900 Operation
■ Output Power Greater Than 33 dBm
■ High Power Added Efficiency of 50%
0.058
(1.47 mm)
16
1
1
0.062
(0.16 mm)
2
2
0.148
0.157
(3.75 mm)
BSC
0.079
(2.00 mm)
(4.00 mm)
BSC
0.031
(0.80 mm)
BSC
PIN
INDICATOR
■ Ultra Small, Thermally Enhanced Micro
0.024
(0.60 mm)
REF.
0.124
(0.32 mm)
Leadframe Package
0.025 (0.65 mm)
+ 0.004 (0.10 mm)
■ Low Current Standby Mode: < 10 µA
0.039
(1.00 mm) MAX.
12˚ MAX.
■ Integral Analog Power Control With
70 dB of Dynamic Range
0.001 (0.025 mm)
+ 0.001 (0.025 mm)
SEATING PLANE
■ GPRS Class 12 Capable
■ Designed to Work With AP131-317 as
Absolute Maximum Ratings
a Dual-/Tri-Band Solution
Characteristic
Value
Supply Voltage V , Standby Mode,
6 V Max.
CC
Description
V
APC
< 0.3 (No RF Input Power)
The AP132-317 is a high performance IC power amplifier
designed for use as the final amplification stage in GSM or
GPRS mobile phones, and other digital wireless
applications in the 1700–2000 MHz band. It features
3-cell battery operation, integrated analog power control
with over 70 dB of dynamic range, and exceptional power
added efficiency over the full battery voltage range. The
amplifier is manufactured on an advanced InGaP HBT
process, known industry-wide for its excellent reliability and
performance.The AP132-317 is designed to be stable over
a wide temperature range of -40 to +85°C and over a
10:1 output VSWR load. Output matching is provided
externally to maximize performance, reduce costs, and allow
optimal matching for output power and efficiency over a
broader frequency range. A dual- and/or tri-band solution
can be obtained by combining the AP132-317 with
Alpha’s AP131-317. The AP132-317 is packaged in a
thermally enhanced, ultra small micro leadframe package.
Power Control Voltage
Input Power (CW)
4 V Max.
15 dBm Max.
-40 to +85°C
-45 to +120°C
Operating Case Temperature
Storage Temperature
DC Specifications
Parameter
Condition
Min.
Typ.
3.2
Max.
4.2
10
Unit
V
Supply Voltage
2.8
Leakage Current
No Input RF Power
µA
V
Power Control Voltage
Power Control Current
0.1
2.6
5
V
= 2.6 V, V = 3.2 V, CW
mA
APC1,2
CC
Skyworks Solutions, Inc. [978] 241-7000 • Fax [978] 241-7906 • Email sales@skyworksinc.com • www.skyworksinc.com
1
Specifications subject to change without notice. 2/02A
3 V InGaP DCS Power Amplifier
AP132-317
Electrical Specifications at 25°C
Parameter
Condition
Min.
Typ.
Max.
Unit
Frequency
DCS
PCS
1710
1850
1785
1910
MHz
MHz
Output Power
V
V
V
= 2.6 V, V = 3.2 V, CW
32.0
32.5
30.5
33.0
33.5
32.0
dBm
dBm
dBm
APC1,2
APC1,2
APC1,2
CC
= 2.8 V, V = 3.5 V, CW
CC
= 2.8 V, V = 2.7 V,
CC
T = -20 to +85°C, CW
Dynamic Range
Power Control Slope
Power Added Efficiency
Input Power
V
APC
V
APC
P
OUT
= 0.1 to 2.8 V
= 0.1 to 2.8 V
60
dB
75
50
6
180
dB/V
APC
= P
Max.
42
3
%
OUT
10
dBm
Input VSWR
P
= 0–32.5 dBm
2:1
OUT
Forward Isolation
P
P
= 6 dBm, V
= 9 dBm, V
= 0.1 V
= 0.1 V
-40
-35
dBm
dBm
IN
APC
IN
APC
Second Harmonic
At P
Max., V = 3.2 V
-50
-60
-45
-55
-40
-76
dBc
dBc
OUT
OUT
CC
Third Harmonic
At P
Max., V = 3.2 V
CC
All Others Non-harmonic Spurious
dBm
dBm
Noise in the R Band
1805–1880 MHz, 100 KHz BW
X
Ruggedness
Output VSWR = 10:1 All Phase Angles,
No Module Damage
or Permanent
V
CC
= 4.2 V, P = 10 dBm, V
= 2.6 V
IN
APC
Performance Degradation
Stability
Output VSWR = 10:1 All Phase Angles,
= 4.2 V, P = 10 dBm, V = 2.6 V
V
-36
dBm
CC
IN
APC
Unless otherwise stated: pulsed operation @ 12.5% duty cycle, 50 Ω system, VCC = 3.2 and TA = 25°C.
2
Skyworks Solutions, Inc. [978] 241-7000 • Fax [978] 241-7906 • Email sales@skyworksinc.com • www.skyworksinc.com
Specifications subject to change without notice. 2/02A
3 V InGaP DCS Power Amplifier
AP132-317
Pin Out
Pin Configuration
Pin
Symbol
Function
Ground connection.
Ground connection.
1
GND
2
GND
GND
RF In
GND
2
3
4
12
RF Out
3
RF In
RF input to power amplifier. A
33 pF DC blocking capacitor is
required.
11 RF Out
10
RF Out
4
5
GND
Ground connection.
V
CC
Power supply input voltage.
1 µF and 33 pF RF bypassing
capacitors are required.
6
7
8
V
Power control input voltage for the
first two stages of the amplifier.
10 nF, 100 pF, and 10,000 pF RF
bypassing capacitors are required.
Can be connected to Pin 7 for
single power control operation.
APC1
V
V
Power control input voltage for
the third stage of the amplifier.
10 nF, 100 pF and 10,000 pF RF
bypassing capacitors are required.
Can be connected to Pin 6 for
single power control operation.
APC2
Power supply input voltage.
10 nF, 1 µF and 100 pF RF
bypassing capacitors are required.
CC
9
GND
Ground connection.
10
RF Out/V
1. RF output: Two shunt matching
capacitors, 4.5 pF high Q and
1.5 pF, and series 33 pF DC
blocking capacitors are required.
CC3
2. V
: 100 pF, 10 nF, and 1 µF
CC3
RF bypassing capacitors are
required.
11
12
13
RF Out/V
RF Out/V
2
RF output and power supply input
voltage. See description for Pin 10.
CC3
RF output and power supply input
voltage. See description for Pin 10.
CC3
Second harmonic termination.
This pin can be used to alter the
second harmonic output charac-
teristics, but for nominal GSM
operation, no matching elements
are required.
14
15
NC
No connect.
V
Power supply input voltage.
CC
1 µF, 100 pF, 10 nF, 5.6 pF and
10 pF interstage tuning and RF
bypassing capacitors are required.
16
V
Power supply input voltage
connected to Pin 15.
CC
Skyworks Solutions, Inc. [978] 241-7000 • Fax [978] 241-7906 • Email sales@skyworksinc.com • www.skyworksinc.com
3
Specifications subject to change without notice. 2/02A
相关型号：
AP1322GEU
TRANSISTOR 600 mA, 20 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, ROHS COMPLIANT PACKAGE-3, FET General Purpose Small Signal
A-POWER
©2020 ICPDF网 联系我们和版权申明