SKY66185-11 [SKYWORKS]
Narrow Band Medium Power Amplifier,;型号: | SKY66185-11 |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | Narrow Band Medium Power Amplifier, |
文件: | 总14页 (文件大小:1054K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
SKY66185-11: 851 to 894 MHz Linear Power Amplifier
Applications
VCC1
VBIAS
VCC3
VEN
3G/4G LTE Bands 5, 6, 18, 19, 26, and 27 small cell
Active distributed antenna system
Cellular repeaters
Active Bias
RFOUT
Coupling Port
Driver amplifier
Output
Match
Input
Match
RFOUT
RFIN
Input Stage
Output Stage
Features
203345-001
High gain: 36.5 dB (unconditionally stable)
Figure 1. SKY66185-11 Linear PA Block Diagram
High linearity: +23 dBm with –50 dBc ACLR @ 85°C
(WCDMA Test Model 1 with 64 DPCH)
Description
RF input and output internally matched to 50 Ω
Excellent output return loss: <–15 dB
The SKY66185-11 is a high-linearity power amplifier (PA) with
fully matched input/output and high gain. The compact 5 x 5 mm
PA is designed for FDD 3G/4G LTE small cell base stations
operating from 851 to 894 MHz. The active biasing circuitry is
integrated to compensate PA performance over temperature,
voltage, and process variation as well as an internal coupler for
power monitoring.
Integrated active bias: performance compensated over temp
PA On/Off function: 6.5 μs switching time
Integrated coupler for output power monitoring
Single supply voltage: 3.3 V
Minimal external components
The SKY66185-11 requires minimal external components and is
part of a high-linearity, pin-to-pin compatible PA family
supporting all 3GPP bands.
Pin-to-pin compatible PA family supporting all 3GPP bands
Small 5 x 5 mm, 28-pin package
(MSL3, 260 C per JEDEC J-STD-020)
A block diagram of the SKY66185-11 is shown in Figure 1. The
device package and pinout for the 28-pin device are shown in
Figure 2. Table 1 lists the pin-to-pin compatible parts in the PA
family.
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
Table 1. Pin-to-Pin Compatible PA Family
Part Number
SKY66181-11
Frequency (MHz)
1805 to 1880
2110 to 2170
851 to 894
LTE Band
3
SKY66184-11
SKY66185-11
SKY66186-11
SKY66187-11
SKY66188-11
SKY66189-11
1, 4, 10, and 23
5, 6, 18, 19, 26, and 27
728 to 768
12, 13, 14, and 17
2620 to 2690
758 to 803
7
28
1930 to 1995
2 and 25
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203354E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 15, 2017
1
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
28 27 26 25 24 23 22
21
20
19
18
17
16
15
GND
GND
N/C
GND
GND
RFOUT
N/C
1
2
3
4
5
6
7
RFIN
N/C
N/C
GND
VEN
GND
GND
8
9
10 11 12 13 14
203354C-002
Figure 2. SKY66185-11 Pinout
(Top View)
Table 2. SKY66185-11 Signal Descriptions
Pin
1
Name
Description
Pin
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Name
Description
GND
GND
N/C
Ground
Ground
GND
GND
N/C
Ground
Ground
2
3
No internal connection
RF input
No internal connection
No internal connection
RF output
4
RFIN
N/C
N/C
5
No internal connection
Ground
RFOUT
GND
GND
N/C
6
GND
VEN
N/C
Ground
7
Enable (active low)
No internal connection
No internal connection
Bias voltage
Ground
8
No internal connection
Output stage supply voltage
No internal connection
Ground
9
N/C
VCC3
N/C
10
11
12
13
14
VBIAS
GND
N/C
Ground
GND
N/C
No internal connection
Ground
No internal connection
Ground
GND
GND
VCC1
RFOUT_COUP
RF output coupling port
Input stage supply voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
February 15, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203354E
2
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
Technical Description
Electrical and Mechanical Specifications
The SKY66185-11 PA contains all of the needed RF matching and
DC biasing circuits. This two-stage device is optimized for high
linearity and power efficiency. These features make the device
suitable for wideband applications where PA linearity and power
consumption are of critical importance (e.g., small cell and
infrastructure applications).
The absolute maximum ratings of the SKY66185-11 are provided
in Table 3. The recommended operating conditions are specified
in Table 4, and electrical specifications are provided in Table 5.
Typical performance characteristics are shown in Figures 3
through 7.
The device is designed for standard WCDMA and LTE modulated
signals. Under these stringent test conditions, the device exhibits
excellent spectral purity and power efficiency.
Table 3. SKY66185-11 Absolute Maximum Ratings1
Parameter
Symbol
Minimum
Maximum
+4.0
700
Units
V
Supply voltage (VCC)
VCC
ICC
0
Total supply current
mA
V
Logic control input voltage (VEN)
VEN
TC
–0.5
–40
–55
3.6
2
Case operating temperature
+105
+150
+150
21
C
Storage temperature
Junction temperature
Thermal resistance
Power dissipation
TSTG
TJ
C
C
θJC
PDISS
ESD
C/W
W
2.3
Electrostatic discharge:
Charged Device Model (CDM)
Human Body Model (HBM)
500
150
V
V
1
2
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Case operating temperature (Tc) refers to the temperature of the bottom ground pad.
ESD HANDLING:Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 4. SKY66185-11 Recommended Operating Conditions
Parameter
Symbol
Minimum
851
Typical
Maximum
894
Units
MHz
V
Frequency range
Supply voltage (VCC1, VCC2, VCC3)
f
1
VCC
3.0
3.3
3.6
PA enable control voltage (active low):
Disable
Enable
VENH
VENL
2.5
0
3.6
0.6
V
V
PA enable current (@ PAEN = 3.6 V)
Case operating temperature
IEN
TC
<1
mA
+25
+40
+85
C
1
Voltage levels measured at the pads of the package. The Evaluation Board supply voltage levels may be different.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203354E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 15, 2017
3
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
Table 5. SKY66185-11 Electrical Specifications1
(VCC = +3.3 V, TC = +25 C, f = 872.5 MHz, Characteristic Impedance [ZO] = 50 Ω, VEN = 0 V, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
CW, POUT = +23 dBm:
Min
Typical
Max
Units
Gain
G@23dBm
851 MHz
872.5 MHz
894 MHz
36.0
36.0
35.5
36.5
36.3
36.0
dB
dB
dB
Input return loss
|S11|
|S22|
CW, PIN = –30 dBm
CW, PIN = –30 dBm:
8.0
10.0
dB
Output return loss:
In-band
Out-of-band
In-band frequency: 851 and 894 MHz
Out-of-band frequency: 831 and 914 MHz
11.0
10.0
15.0
13.0
dB
dB
Quiescent current
ICQ
No RF
130
420
0.1
160
480
1.5
mA
mA
mA
Operating current
ICC
CW, POUT = +23 dBm
VEN = 2.5 V
Power-down current
Adjacent channel leakage ratio
IPD
ACLR
@ 5 MHz offset, WCDMA test model 1, with
64 DPCH, 8.5 dB PAR,
POUT = +23 dBm
–50
–46.5
20
dBc
Output 1 dB compression point
OP1dB
CW (Gain compression less than 1dB
reference to G@23dBm)
+30.3
12
+30.8
14
dBm
%
Power-added efficiency
Output coupling factor
PAE
CW @ POUT = +23 dBm
POUT = +23 dBm, CW
CPLOUT
16
18
dB
1
Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
February 15, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203354E
4
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
Typical Performance Characteristics
(VCC = +3.3 V, TC = +25 C, f = 872.5 MHz, Characteristic Impedance [ZO] = 50 Ω, VEN = 0 V, Unless Otherwise Noted)
44
42
40
38
36
34
32
30
35
25 °C
40 °C
85 °C
25 °C
40 °C
85 °C
30
25
20
15
10
5
0
33
9
11
13
15
17
19
21
23
25
27
29
31
9
11 13 15 17 19 21 23 25 27 29 31 33
POUT (dBm)
POUT (dBm)
Figure 4. PAE vs Output Power
Figure 3. Gain vs Output Power
32.5
32.0
31.5
31.0
30.5
30.0
–30
25 ˚C
40 ˚C
85 ˚C
–35
–40
–45
–50
–55
–60
25
30
35
40
45
50
55
60
65
70
75
80
85
24
21
22
23
Temperature (°C)
POUT (dBm)
Figure 5. OP1dB vs Temperature
Figure 6. ACLR vs Output Power
–12
–13
25 ˚C
40 ˚C
85 ˚C
–14
–15
–16
–17
–18
–19
–20
–21
828
838
848
858
868
878
888
898
908
918
Frequency (MHz)
Figure 7. S22 vs Frequency across Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203354E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 15, 2017
5
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
Evaluation Board Description
Application Circuit Notes
The SKY66185-11 Evaluation Board is used to test the
performance of the SKY66185-11 PA. A typical application
schematic diagram is shown in Figure 8. A Bill of Materials for the
SKY66185-11 Evaluation Board is listed in Table 6. An assembly
drawing for the Evaluation Board is shown in Figure 9. The board
layer detail is shown in Figurer 10. The layer detail physical
characteristics are shown in Figure 11.
Center Ground. It is extremely important to sufficiently ground
the bottom ground pad of the device for both thermal and stability
reasons. Multiple small vias are acceptable and work well under
the device if solder migration is an issue.
GND (pins 1, 2, 6, 11, 13, 15, 16, 20, 21, 25, and 27). Attach all
ground pins to the RF ground plane with the largest diameter and
lowest inductance via that the layout allows. Multiple small vias
are acceptable and work well under the device if solder migration
is an issue.
VBIAS (pin 10). The bias supply voltage for each stage, nominally
set to +3.3 V.
RFOUT (pin 19). Amplifier RF output pin (ZO = 50 Ω). The module
includes an onboard internal DC blocking capacitor. All
impedance matching is provided internal to the module.
VCC1 and VCC3 (pins 28 and 23, respectively). Supply voltage
for each stage collector bias is nominally set to 3.3 V. Bypass and
decoupling capacitors C1, C2, C5, and C6 should be placed in the
approximate location shown on the evaluation board assembly
drawing, although exact placement is not critical.
RFIN (pin 4). Amplifier RF input pin (Zo = 50 Ω). The module
includes an onboard internal DC blocking capacitor. All
impedance matching is provided internal to the module.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
February 15, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203354E
6
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
J1
1
2
3
4
5
6
7
8
PAEN
VBIAS
VCC1
C2
0.1 μF
C1
10 μF
VCC1
VCC3
L1
0 Ω
N/C
VCC3
C12
DNI
C5
0.1 μF
C6
10 μF
X
X
X
29
28 27 26 25 24 23 22
GND
8 Header
J3
21
20
19
18
17
16
15
1
2
3
4
5
6
7
GND
GND
N/C
GND
GND
RFOUT
N/C
C7
33 pF
RFOUT
X
X
J2
RFIN
N/C
SKY66185-11
X
X
C8
DNI
N/C
GND
VEN
GND
GND
RFIN
R2
5100 Ω
8
9
10 11 12 13 14
X
R5
0 Ω
RF Output
Coupling Port
X
X
PAEN
J4
C10
0.1 μF
C11
0.1 μF
203354C-008
VBIAS
Figure 8. SKY66185-11 Application Schematic
Table 6. SKY66185-11 Evaluation Board Bill of Materials (BOM)
Quantity
Component
Size
Part Number
C1206X7R160-106KNE
GRM155R71C104KA88
GRM1555C1H330JZ01
DNI
Description
2
3
1
3
1
1
1
1
C1, C6
1206
0402
0402
Capacitor, 10 μF, 16 V, 10%, X7R
Ceramic capacitor, 0.1 μF, 10%, X7R, 16 V
Capacitor, 33 pF, 50 V, 5%, X7R
DNI
C2, C5, C10, C11
C7
C8, C12
L1
0603
0402
PCB
RM73ZIJ000
Resistor, 0 Ω, 5%
R5
ERJ2GE0R00
Resistor, 0 Ω, jumper, 0.063 W
SKY66185
TW22-D115-002
ERJ2GEJ512
R2
0402
Resistor, 5100 Ω, 5%, 0.063 W
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203354E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 15, 2017
7
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
J1
C6
C5
C4
L1
C12
C1
C3
C2
C8
RF Out
U1
RF In
C7
C10 R2
C11
R5
RF Out Coupling Port
Notes:
203354C-009
The C3 and C4 components are not required.
Some of the other components shown are optional.
Figure 9. SKY66185-10 Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
February 15, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203354E
8
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
Figure 10. SKY66185-11 Board Layer Detail
Cross Section
Name
Top Solder Mask
L1
Thickness (mm)
Material
Solder Resist
Cu – 1 oz
0.010
0.035
0.250
0.035
0.500
Dielectric
L2
Rogers RO4350B
Cu – 1 oz
Dielectric
FR4
L3
0.035
0.250
Cu – 1 oz
Dielectric
FR4
L4
0.035
0.010
Cu – 1 oz
Bottom Solder Mask
Solder Resist
203354C-011
Figure 11. SKY66185-11 Layer Detail Physical Characteristics
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203354E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 15, 2017
9
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
The SKY66185-11 is rated to Moisture Sensitivity Level 3
(MSL3) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, PCB Design and SMT Assembly/Rework Guidelines for
MCM-L Packages, document number 101752.
Package Dimensions
The typical part marking is shown in Figure 12. Figure 13 shows
the PCB layout footprint. Figure 14 shows the package
dimensions, and Figure 15 provides the tape and reel
dimensions.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it
is baked and vacuum packed before shipping. Instructions on
the shipping container label regarding exposure to moisture
after the container seal is broken must be followed. Otherwise,
problems related to moisture absorption may occur when the
part is subjected to high temperature during solder assembly.
Pin 1
Indicator
Skyworks
66185-11
Part Number
Lot Code
XXXXXXXXX
YYWW CC
Date Code:
YY = Calendar Year
WW = Work Week
203354C-012
CC = Country Code
Figure 12. Typical Part Marking
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
February 15, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203354E
10
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
5.3 mm
Pin 28
Package Outline
6X 1.25 mm
Pin 1 Indicator
0.43 X 0.43
Pin 1
0.5 mm Pitch
5.3 mm
6X 1.25 mm
9X 1.1 mm
28X 0.55 mm
Exposed Center Pad
Stencil aperture size of
80% to 100% of the module/package
solder mask openings
28X 0.25 mm
9X 1.1 mm
Stencil Aperture
Top View
5.4 mm
5.3 mm
Pin 28
Package Outline
Package Outline
0.25 mm Typ
Pin 1 Indicator
0.43 x 0.43
Pin 28
Pin 1
Pin 1
0.5 mm Pitch
0.5 mm Pitch
5.3 mm
5.4 mm
2X 1.8 mm
0.6 mm Pitch
17X 0.55 mm
28X 0.65 mm
Thermal via array
Ø
0.3 mm
Exposed Center Pad
Opening size of 60%
to 100% of exposed
center opening shown
on 0.6 mm pitch
improves thermal performance
17X 0.25 mm
28X 0.35 mm
2X 1.8 mm
0.6 mm Pitch
Metallization
Top View
Solder Mask Opening
Top View
Notes:
1. Thermal vias should be resin filled and capped in accordance with IPC–4761 type VII vias.
2. Recommended Cu thickness is 30 to 35 μm.
203354C-013
Figure 13. SKY66185-11 PCB Layout Footprint
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203354E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 15, 2017
11
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
28X SMT Pad
0.1
5
B
Top
A
B C
Pin 28
Pin 1
Indicator
C
See Detail B
Pin 1 Indicator
See Detail C
Pin 1
4X 1.5
4X 0.5
5
0
4X 1
6X 1.25
14X 2.4
A
A
1.25 0.1
Solder Mask Opening
0.2 B C
0.075 A B C
A
0.1
Top View
Side View
Bottom View
0.35 0.05
2X (0.05)
1.1
0.43 X 0.43
0.3 0.1
1.1
1.1
(0.1)
Metal Pad Edge
0.25 0.05
4X R0.05 Max
5X R0.05 Max
1.1
Detail B
Pad
Detail C
Pad
Detail A
Pad
Scale: 2X
Scale: 2X
Scale: 2X
8X This Rotation
Notes:
7X This Rotation
7X Rotated 180°
7X Rotated 90° CW
1X This Rotation
1. Dimensions are in millimeters.
2. Dimensions and tolerances according to ASME Y14.5M-1994.
203354C-014
7X Rotated 90° CCW
Figure 14. SKY66185-11 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
February 15, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203354E
12
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
Ø1.50
Pin 1
2.00 0.10
4.00 0.10
1.75 0.10
0.25 0.20
0.10
Ø1.50 0.10
1.40 0.10
8.00 0.10
Notes:
1.Carrier tapes must meet all requirements of Skyworks GP01-D232 procurement spec for tape and reel shipping.
2.Carrier tape shall be black conductive polycarbonate.
5.25 0.10
3.Cover tape shall be transparent conductive material.
4.ESD-surface resistivity shall be ≤ 1 × 1010 Ω/square per EJA, JEDEC TNR specification.
5.All measurements are in millimeters.
203354C-015
Figure 15. SKY66185-11 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203354E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 15, 2017
13
DATA SHEET • SKY66185-11: 851 TO 894 MHz LINEAR POWER AMPLIFIER
Ordering Information
Model Name
Manufacturing Part Number
SKY66185-11
Evaluation Board Part Number
TW22-D115-002
SKY66185-11: Linear PA
Copyright © 2015-2017 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
14
February 15, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203354E
相关型号:
©2020 ICPDF网 联系我们和版权申明