SKY73084-11 [SKYWORKS]
300 - 500 MHz High Gain and Linearity Diversity Downconversion Mixer; 300 - 500 MHz的高增益和线性度差异下变频混频器
| 型号： | SKY73084-11 |
| 厂家： | 
SKYWORKS SOLUTIONS INC. |
| 描述： | 300 - 500 MHz High Gain and Linearity Diversity Downconversion Mixer |
| 文件： | 总16页 (文件大小：357K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
SKY73084-11: 300 – 500 MHz High Gain and Linearity
Diversity Downconversion Mixer
Applications
Description
The SKY73084-11 is a fully integrated diversity mixer that
includes Local Oscillator (LO) drivers, an LO switch, high linearity
mixers, and large dynamic range Intermediate Frequency (IF)
amplifiers. Low loss RF baluns have also been included to reduce
design complications and lower system cost.
• 2G/3G base station transceivers:
− GSM/EDGE, CDMA, UMTS/WCDMA
• Land mobile radio
• High performance radio links
The SKY73084-11 features an input IP3 of +25.2 dBm and a
Noise Figure (NF) of 9.4 dB, making the device an ideal solution
for high dynamic range systems such as 2G/3G base station
receivers. The LO switch provides more than 60 dB of isolation
between LO inputs and supports the switching time required for
GSM/EDGE base stations.
Features
• Operating frequency range: 300 to 500 MHz
• IF frequency range: 50 to 250 MHz
• Conversion gain: 9.8 dB
The SKY73084-11 is manufactured using a robust silicon BiCMOS
process and has been designed for optimum long-term reliability.
The SKY73084-11 diversity downconversion mixer is provided in
a compact, 36-pin Multi-Chip Module (MCM). A functional block
diagram is shown in Figure 1. The pin configuration and package
are shown in Figure 2. Signal pin assignments and functional pin
descriptions are provided in Table 1.
• Input IP3: +25.2 dBm
• Output IP3: +35 dBm
• Noise figure: 9.4 dB
• Integrated LO drivers
• Integrated low loss RF baluns
• High linearity IF amplifiers
• On-chip SPDT LO switch (greater than 60 dB LO-to-LO isolation)
• Small, MCM (36-pin, 6 x 6 mm) Pb-free package (MSL3, 260 °C
per JEDEC J-STD-020)
IFA+
IFA–
RFA
LO1
LO_SEL
(Switch Enable)
LO2
RFB
S643
IFB+
IFB–
Figure 1. SKY73084-11 Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
1
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
36
35
34
33
32
31
30
29
28
27
26
1
2
RFA
NC
LO2
GND
GND
GND
25
24
3
4
GND
VCC_LO
23
22
5
6
GND
LO_SEL
GND
VCC_LO
21
20
19
7
8
9
GND
NC
VCC_LO
GND
RFB
LO1
10
11
12
13
14
15
16
17
18
S646
Figure 2. SKY73084-11 Pinout – 36-Pin MCM
(Top View)
Table 1. SKY73084-11 Signal Descriptions
Pin #
1
Name
Description
RF channel A input
Pin #
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Name
Description
Local oscillator #1 input
RFA
NC
LO1
2
No connect
GND
VCC5
GND
Ground
3
GND
VCC1
GND
VCC2
GND
NC
Ground
DC supply, +5 V
Ground
4
DC supply, +5 V
Ground
5
LO_SEL
GND
GND
GND
LO2
Local oscillator switch select
Ground
6
DC supply, +5 V
Ground
7
Ground
8
No connect
Ground
9
RFB
VCC3
NC
RF channel B input
DC supply, +5 V
No connect
Local oscillator #2 input
No connect
10
11
12
13
14
15
16
17
18
NC
RIFA
VCC6
NC
IF channel A bias control
DC supply, +5 V
No connect
GND
IFB+
IFB–
NC
Ground
IF channel B positive output
IF channel B negative output
No connect
IFA+
IFA–
GND
NC
IF channel A positive output
IF channel A negative output
Ground
VCC4
RIFB
NC
DC supply, +5 V
IF channel B bias control
No connect
No connect
VCC7
DC supply, +5 V
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
2
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
A high isolation SPDT switch allows the SKY73084-11 to be
used for frequency hopping applications. This switch provides
greater than 60 dB of LO1 to LO2 isolation:
Functional Description
The SKY73084-11 is a high gain diversity mixer, optimized for
base station receiver applications. The device consists of two
diversity channels, each consisting of a low loss RF balun, high
linearity passive mixer, and a low noise IF amplifier.
LO_SEL Logic:
High
State:
LO1 enabled
LO2 enabled
LO amplifiers are also included that allow the SKY73084-11 to
connect directly to the output of a Voltage Controlled Oscillator
(VCO). This eliminates the extra gain stages needed by most
discrete passive mixers. A Single Pole, Double Throw (SPDT)
switch has been included to select between two different LO
inputs for frequency hopping applications (i.e., GSM).
Low
For applications that do not require frequency hopping, LO_SEL
is fixed to one state and the appropriate LO input is used.
IF Amplifier
The SKY73084-11 includes high dynamic range IF amplifiers
that follow the passive mixers in the signal path. The outputs
require a supply voltage connection using inductive chokes.
These choke inductors should be high-Q and have the ability to
handle 200 mA or greater.
RF Baluns and Passive Mixer
The RF baluns provide a single ended input, which can easily be
matched to 50 Ω using a simple matching circuit. The RF
baluns offer very low loss and excellent amplitude and phase
balance.
A simple matching network allows the output ports to be
matched to a balanced 200 Ω impedance. The IF amplifiers are
optimized for IF frequencies between 50 and 250 MHz. The IF
amplifiers can be operated outside of this range, but with a
slight degradation in performance.
The high linearity mixer is a passive, double balanced mixer that
provides a very low insertion loss, and excellent 3rd Order Input
Insertion Point (IIP3) and linearity performance.
Additionally, the balanced nature of the mixer provides for
excellent port-to-port isolation.
Electrical and Mechanical Specifications
LO Buffers and SPDT LO Switch
The absolute maximum ratings of the SKY73084-11 are
provided in Table 2. The recommended operating conditions are
specified in Table 3 and electrical specifications are provided in
Table 4.
The LO buffers allow the input power of the SKY73084-11 to be
programmed in the range of –6 to +6 dBm. The LO section has
been optimized for high-side LO injection. However, the LO can
be driven over a wide frequency range with only slight
degradation in performance.
Typical performance characteristics of the SKY73084-11 are
illustrated in Figures 3 through 31.
Table 2. SKY73084-11 Absolute Maximum Ratings
Parameter
Supply voltage, +5 V (VCC1 – VCC7)
Supply current
Symbol
Minimum
Typical
5.0
Maximum
5.5
Units
V
VCC
ICC
4.5
370
430
mA
dBm
dBm
°C
RF input power
PRF
PLO
TC
+20
LO input power
0
+20
Operating case temperature
Junction temperature
Storage case temperature
–40
–40
+85
TJ
+150
+125
°C
TSTG
°C
Notes: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value.
Nominal thermal resistance (junction to center ground pad) is 5.1 °C/W.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
3
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
Table 3. SKY73084-11 Recommended Operating Conditions
Parameter
RF frequency range
Symbol
Minimum
300
Typical
Maximum
500
Units
MHz
MHz
MHz
V
FRF
FLO
FIF
LO frequency range (Note 1)
IF frequency range
350
600
50
250
Supply voltage, +5 V (VCC1 – VCC7)
Supply current
VCC
ICC
4.75
5.00
370
0
5.25
mA
LO input power
PLO
–6
2.2
–40
+6
dBm
LO select logic:
high
low
LO_SELH
LO_SELL
V
V
0.8
Operating case temperature
TC
+85
°C
Note 1: The SKY73084-11 has been optimized for high-side LO injection. However, the LO can be used outside of the specified frequency range with degraded performance.
Table 4. SKY73084-11 Electrical Specifications (1 of 2)
(Voltage Supply = +5 V, TC = +25 °C, LO = 0 dBm, RF Frequency = 350 MHz, IF Frequency = 90 MHz, LO Frequency = 440 MHz, Unless
Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
Conversion gain
G
FRF = 328 to 388 MHz,
VCC = 4.75 to 5.25 V,
PLO = –3 to +3 dBm
7.5
9.8
dB
Gain variation over temperature
FRF = 350 MHz,
±1
dB
Tc = –40 to +85 °C
Noise Figure
NF
FRF = 350 MHz
9.4
11.0
25
dB
dB
Noise Figure variation over temperature
FRF = 350 MHz,
Tc = –40 to +85 °C
±0.8
Noise Figure with a blocker signal
Third order input intercept point
NFBLK
IIP3
Blocking signal input
power = +8 dBm
18
dB
FRF = 350 and 350.8 MHz,
PRF = –10 dBm/each tone,
VCC = 4.75 to 5.25 V,
PLO = –3 to +3 dBm
+23.5
+25.2
dBm
Input IP3 variation over temperature
Third order output intercept point
FRF = 350 and 350.8 MHz,
Tc = –40 to +85 °C
±0.4
dB
OIP3
FRF = 350 and 350.8 MHz,
PRF = –10 dBm/each tone,
VCC = 4.75 to 5.25 V,
PLO = –3 to +3 dBm
+35
dBm
2RF – 2LO
2x2
PRF = –10 dBm
PRF = –10 dBm
PRF = +2 dBm
–63
–85
–57
–70
–95
dBc
dBc
dBc
dBm
dBm
dB
3RF – 3LO
3x3
4RF – 3LO
4x3
–102
+13.2
+22.0
63
Input 1 dB compression point
Output 1 dB compression point
LO1 to LO2 isolation
IP1dB
OP1dB
+9.5
FRF = 350 MHz,
FLO = 440 MHz
40
37
30
Channel-to-channel isolation
RF to IF isolation
FRF = 350 MHz,
FLO = 440 MHz
41
76
dB
dB
Frf = 350 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
4
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
Table 4. SKY73084-11 Electrical Specifications (2 of 2)
(Voltage Supply = +5 V, TC = +25 °C, LO = 0 dBm, RF Frequency = 350 MHz, IF Frequency = 90 MHz, LO Frequency = 440 MHz, Unless
Otherwise Noted)
Parameter
Symbol
Test Condition
FRF = 350 MHz,
Min
Typical
Max
Units
LO leakage:
1xLO to RF port
2xLO to RF port
3xLO to RF port
4xLO to RF port
1xLO to IF port
FLO = 440 MHz
–40
–28
–50
–
–25
–22
–28
–28
–23
dBm
dBm
dBm
dBm
dBm
–40
LO_SEL input
–20
+150
+250
1.0
µA
µs
dB
LO switching time
RF port input return loss
ZIN_RF
With external matching
components
14
14
14
LO port input return loss
IF port input return loss
ZIN_LO
With external matching
components
dB
dB
ZOUT_IF
With external matching
components
12.0
11.5
11.0
12.0
11.5
11.0
o
o
o
–40
+25
+85
C
C
C
4.75 V
5.00 V
5.25 V
10.5
10.0
9.5
10.5
10.0
9.5
9.0
8.5
9.0
8.5
8.0
7.5
8.0
7.5
7.0
7.0
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 4. Mixer A Gain vs. Frequency and Temperature
Figure 3. Mixer A Gain vs. Frequency and Supply Voltage
12.0
12.0
–3 dBm
0 dBm
+3 dBm
4.75 V
5.00 V
5.25 V
11.5
11.0
11.5
11.0
10.5
10.0
9.5
10.5
10.0
9.5
9.0
8.5
9.0
8.5
8.0
7.5
8.0
7.5
7.0
7.0
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 6. Mixer B Gain vs. Frequency and Supply Voltage
Figure 5. Mixer A Gain vs. Frequency and LO Power
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
5
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
12.0
11.5
11.0
12.0
11.5
11.0
o
o
o
–40
+25
+85
C
C
C
–3 dBm
0 dBm
+3 dBm
10.5
10.0
9.5
10.5
10.0
9.5
9.0
8.5
9.0
8.5
8.0
7.5
8.0
7.5
7.0
7.0
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 7. Mixer B Gain vs. Frequency and Temperature
Figure 8. Mixer B Gain vs. Frequency and LO Power
15
14
13
15
14
13
4.75 V
5.00 V
5.25 V
o
o
o
–40
+25
+85
C
C
C
12
11
12
11
10
10
9
9
8
8
7
6
5
7
6
5
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 10. Mixer A Noise Figure vs Frequency and Temperature
Figure 9. Mixer A Noise Figure vs Frequency and Supply Voltage
15
15
14
13
4.75 V
5.00 V
5.25 V
–3 dBm
0 dBm
+3 dBm
14
13
12
11
10
12
11
10
9
8
9
8
7
6
7
6
5
5
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 12. Mixer B Noise Figure vs Frequency and Supply Voltage
Figure 11. Mixer A Noise Figure vs Frequency and LO Power
15
15
o
o
o
–40
+25
+85
C
C
C
14
13
–3 dBm
0 dBm
+3 dBm
14
13
12
11
10
12
11
10
9
8
9
8
7
6
7
6
5
5
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 13. Mixer B Noise Figure vs Frequency and Temperature
Figure 14. Mixer B Noise Figure vs Frequency and LO Power
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
6
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
30
29
28
30
29
28
o
o
o
–40
+25
+85
C
C
C
4.75 V
5.00 V
5.25 V
27
26
25
27
26
25
24
23
24
23
22
21
22
21
20
20
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 16. Mixer A IIP3 vs Frequency and Temperature
Figure 15. Mixer A IIP3 vs Frequency and Supply Voltage
30
30
–3 dBm
0 dBm
+3 dBm
29
28
4.75 V
5.00 V
5.25 V
29
28
27
26
25
27
26
25
24
23
24
23
22
21
22
21
20
20
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 18. Mixer B IIP3 vs Frequency and Supply Voltage
Figure 17. Mixer A IIP3 vs Frequency and LO Power
30
30
29
28
o
o
o
–3 dBm
–40
+25
+85
C
C
C
29
0 dBm
28
+3 dBm
27
26
25
27
26
25
24
23
24
23
22
21
22
21
20
20
328
336
344
352
360
368
376
384
328
336
344
352
360
368
376
384
RF Frequency (MHz)
RF Frequency (MHz)
Figure 20. Mixer B IIP3 vs Frequency and LO Power
Figure 19. Mixer B IIP3 vs Frequency and Temperature
–60
–61
–62
–60
o
o
o
–40
+25
+85
C
C
C
–61
–62
–63
–64
–63
–64
–65
–66
–67
–65
–66
–67
o
o
o
–40
+25
+85
C
C
C
–68
–69
–68
–69
–70
–70
70
75
80
85
90
95
100
105
110
115
70
75
80
85
90
95
100
105
110
115
IF Frequency (MHz)
IF Frequency (MHz)
Figure 22. Mixer B 2RF–2LO vs IF Frequency and Temperature
Figure 21. Mixer A 2RF–2LO vs IF Frequency and Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
7
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
90
87
84
90
o
o
o
o
o
o
–40
+25
+85
C
C
C
–40
+25
+85
C
C
C
87
84
81
81
78
78
75
75
72
69
72
69
66
66
63
63
60
60
4.75
5.00
5.25
4.75
5.00
5.25
Supply Voltage (V)
Supply Voltage (V)
Figure 23. Mixer A RF to IF Isolation vs Supply Voltage and
Temperature
Figure 24. Mixer B RF to IF Isolation vs Supply Voltage and
Temperature
–30
–30
o
o
o
o
o
o
–40
+25
+85
C
C
C
–32
–34
–36
–40
+25
+85
C
C
C
–32
–34
–36
–38
–40
–38
–40
–42
–44
–46
–42
–44
–46
–48
–50
–48
–50
70
75
80
85
90
95
100
105
110
115
70
75
80
85
90
95
100
105
110
115
IF Frequency (MHz)
IF Frequency (MHz)
Figure 25. Mixer A LO to IF Leakage vs IF Frequency and
Temperature
Figure 26. Mixer B LO to IF Leakage vs IF Frequency and
Temperature
–30
–30
o
o
o
–40
+25
+85
C
C
C
–32
–34
–36
o
o
o
–40
+25
+85
C
C
C
–32
–34
–36
–38
–40
–38
–40
–42
–44
–46
–42
–44
–46
–48
–50
–48
–50
70
75
80
85
90
95
100
105
110
115
70
75
80
85
90
95
100
105
110
115
IF Frequency (MHz)
IF Frequency (MHz)
Figure 28. Mixer B LO to RF Leakage vs IF Frequency and
Temperature
Figure 27. Mixer A LO to RF Leakage vs IF Frequency and
Temperature
50
–90
o
o
o
o
o
o
–40
C
C
C
–40
C
C
C
48
46
–93
–96
+25
+25
+85
+85
44
–99
42
40
–102
–105
38
36
34
–108
–111
–114
32
30
–117
–120
4.75
5.00
5.25
4.75
5.00
5.25
Supply Voltage (V)
Supply Voltage (V)
Figure 30. Mixer A 4RF to 3LO vs Supply Voltage and Temperature
Figure 29. Channel A to Channel B IF Isolation vs Supply Voltage
and Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
8
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
–90
o
o
o
–40
+25
+85
C
C
C
–93
–96
–99
–102
–105
–108
–111
–114
–117
–120
4.75
5.00
5.25
Supply Voltage (V)
Figure 31. Mixer B 4RF to 3LO vs Supply Voltage and Temperature
Evaluation Board Description
Package Dimensions
The SKY73084-11 Evaluation Board is used to test the
The PCB layout footprint for the SKY73084-11 is provided in
Figure 35. Figure 36 shows the package dimensions for the
36-pin MCM and Figure 37 provides the tape and reel
dimensions.
performance of the SKY73084-11 downconversion mixer. An
assembly drawing for the Evaluation Board is shown in Figure 32
and the layer detail is provided in Figure 33. A schematic diagram
of the SKY73084-11 Evaluation Board is shown in Figure 34.
Package and Handling Information
Circuit Design Configurations
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
The following design considerations are general in nature and
must be followed regardless of final use or configuration:
1. Paths to ground should be made as short as possible.
2. The ground pad of the SKY73084-11 has special electrical
and thermal grounding requirements. This pad is the main
thermal conduit for heat dissipation. Since the circuit board
acts as the heat sink, it must shunt as much heat as possible
from the device. Therefore, design the connection to the
ground pad to dissipate the maximum wattage produced by
the circuit board.
THE SKY73084-11 is rated to Moisture Sensitivity Level 3 (MSL3)
at 260 °C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design & SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
3. Skyworks recommends including external bypass capacitors
on the VCC voltage inputs of the device.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format. For packaging details, refer to the Skyworks
Application Note, Tape and Reel, document number 101568.
4. Components L5, L6, L14, and L15 (see Figure 34) are high-Q
low loss inductors. These inductors must be able to pass
currents in excess of 200 mA DC.
5. Components R1 and R2 (see Figure 34) set the bias current
for the IF amplifiers. Skyworks recommends that these
resistors have a tolerance of ±1% to optimize performance
consistency of the SKY73084-11. These resistors are not
required for the Evaluation Board to operate as specified in
Tables 3 and 4.
Electrostatic Discharge (ESD) Sensitivity
The SKY73084-11 is a static-sensitive electronic device. Do not
operate or store near strong electrostatic fields. Take proper ESD
precautions.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
9
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
J9
J5
C34
L16
C35
R4
C29
C28
L12
L17
C38
L13
C33
C25
L11
T2
J4
J8
C32
L1
C24
C39
R2
C26
C2
L2
C3
L14
L15
C27
R5
C1
C23
C20
C22
C4
C21
J1
J2
C5
C8
C17
C7
L4
R1
R6
C14
C13
C41
L5
L6
C40
C18
C6
L3
L10
C11
C12
R3
T1
J3
C19
J7
L18
L19
L8
L9
C16
C36
C37
C15
J10
J6
S905
Figure 32. SKY73084-11 Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
10
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
Layer 1: Top -- Metal
Layer 2: Ground
Layer 3: Power Plane
Layer 4: Solid Ground Plane
S904
Figure 33. SKY77024 Evaluation Board Layer Detail
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
11
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
R4
0 Ω
DB714
L13
39 nH
L12
0 Ω
L14
470 nH
J5
T2
C28
33 pF
L15
470 nH
VCC
C26
1 μF
C27
33 pF
VCC
R2
DNI
VCC
36
35 34 33 32 31 30 29 28
L1
L11
0 Ω
L2
C1
J8
J4
0 Ω
5.1 pF
0 Ω
27
26
1
2
3
4
LO2
GND
RFA
C23
33 pF
C2
27 nH
x
NC
25
24
23
GND
Element Jumper
GND
VCC1
GND
VCC2
GND
NC
VCC
VCC
VCC
GND
C22
12 pF
C35
5
6
7
8
9
33 pF
SKY73084
C20
1 μF
LO_SEL
GND
22
21
VCC5
GND
C21
33 pF
20
19
L4
5.1 pF
C8
0 Ω
x
L3
0 Ω
J7
J3
RFB
LO1
L10
0 Ω
C17
33 pF
C6
27 nH
10
11 12 13 14 15 16 17 18
R1
DNI
VCC
L5
470 nH
VCC
C13
1 μF
C14
33 pF
L9
0 Ω
J6
VCC
L6
470 nH
L8
39 nH
C16
33 pF
T1
DB714
R3
0 Ω
Note: The SKY73084 Evaluation Board can be converted to
provide a differential output by removing components
T1, T2, R3, and R4.
Some component labels may be different than the
corresponding component symbol shown here.
Component values, however, are accurate as of the
date of this Data Sheet.
S1237
Figure 34. SKY73084-11 Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
12
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
6.3
0.4
Component Outline
0.25
0.075
0.075
0.15
0.75 0.9
12X 0.062
Stencil and
Metallization
6.3
36X 0.875
Component Outline
Soldermask Opening
24X 0.125
SMT Pad Detail
Scale: 2X
9X This Rotation
Stencil aperture size for center
ground pads should be 80% to
100% (by area) of the solder
mask opening of the package.
o
9X Rotated 180
o
9X Rotated 90 CW
o
9X Rotated 90 CCW
12X 0.063
24X 0.125
36X 0.875
Stencil Aperture
Top View
6.3
6.45
Pin 36
Pin 1
2X 2.775
2X 2.775
6.45
3.88
6.3
0.5
Pitch
Typ
Component Outline
Component Outline
Thermal Via Array.
0.25 Typ
Solder Mask Opening
Top View
∅0.3 mm on 0.6 mm pitch.
Additional vias in common ground
pad will improve thermal and electrical
performance. NOTE: thermal vias
should be tented and filled with solder
Metallization
Top View
mask, 30-35 μm Cu plating recommended.
Note:The cross-hatched area represents the merger of the center
ground pad +10 individual I/O ground pads. All I/O ground
pads should have at least one via connected to internal ground
planes for optimum electrical performance.
All measurements are in millimeters
S1125
Figure 35. PCB Layout Footprint for the SKY73084-11 6 x 6 mm MCM
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
13
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
18X 2.9
4X 2
4X 1.5
Pin 1 Indicator
Pin 36
6
Pin 1 Indicator
(See Detail D)
Pin 1
B
C
4X 0.5
4X 1
A
4X 2
4X 1.5
4X 1
6
4X 0.5
2X 1.9
18X 2.9
36x SMT Pad
0.15 A B C
3X R0.2
1.1 0.1
A
2X 1.9
0.1
0.15 A B C
Solder Mask Opening
0.2 A B C
Top View
Side View
Bottom View
0.5 0.1
0.2 x 0.2
(0.1)
0.25 0.05
0.4 0.05
Detail D
Metal Pad Edge
Detail A
All measurements are in millimeters
Pads are solder mask defined on one edge and metal
defined on three edges.
Dimensioning and tolerancing according to ASME Y14.5M-1994
S689_A
Figure 36. SKY73084-11 36-Pin MCM Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
14
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
2.00 0.05
4.00
8.00
∅1.50 0.10
0.30 0.02
B
1.75 0.10
Pin #1 Indicator
(see Notes)
A
A
7o Max.
B
∅1.50 Min.
1.59
6.35
B
8o Max.
Notes:
1. Carrier tape: black conductive polystyrene
2. Cover tape material: transparent conductive PSA
3. Cover tape size: 9.3 mm width
4. All dimensions are in millimeters
5. Pin 1 orientation is in top left corner for the following Skyworks products:
A
SKY73022-21, -31
SKY73023-21, -31
For all other 6 x 6 mm MCM/RFLGA products, pin 1 orientation is
in top right corner.
S1183
Figure 37. SKY73084-11 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200884F • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 3, 2009
15
DATA SHEET • SKY73084-11 DOWNCONVERSION MIXER
Ordering Information
Model Name
Manufacturing Part Number
SKY73084-11 (Pb-free package)
Evaluation Kit Part Number
TW17-D570
SKY73084-11 300-500 MHz Downconversion Mixer
Copyright © 2008, 2009 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
16
April 3, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200884F
相关型号：
SKY73085-11
390 - 500 MHz High Gain and Linearity Diversity Downconversion Mixer for 2G/3G Base Station Transceiver Applications
SKYWORKS
©2020 ICPDF网 联系我们和版权申明