CENB1010A1203F01 [SLPOWER]
ITE Switch-Mode Power Supply;
| 型号： | CENB1010A1203F01 |
| 厂家： | 
SL Power Electronics |
| 描述： | ITE Switch-Mode Power Supply |
| 文件： | 总3页 (文件大小：495K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CENB1010
Universal 10 Watt Series
ITE Switch-Mode Power Supply
3 Year Warranty
•100-240VAC Universal Input Range
•Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•Desktop & Wall Plug Styles
•5V to 48V Single Output Models, up to 12W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No load Power Consumption <0.3W
•Limited Power Source
•Certified to UL/EN/IEC60950-1, 2nd Edition
RoHS
LPS
Specifications
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
MTBF
>250,000 hours (calculated)
18 ms min. @ 115Vac, 60 ms min. @ 230 Vac
Hiccup Mode
AC Input
100-240VAC, -/-10%, 47-63 Hz, 1∅
Input Current
Inrush Current
100Vac: 0.27A Hold-up Time
60 A peak max at 264 Vac
Overload Protection
Input Fuse Internal Primary Current Fuse provided (1A, 250Vac rated) Short Circuit Protection
Hiccup Mode
Efficiency
Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
See chart
Topology
Switching – Fixed Frequency Flyback
Output Voltage
Safety Standards
EN/IEC/CSA/UL60950-1, 2nd Edition, LPS
Output Power
See chart
EMC, Radiated & Conducted
Dielectric Withstand
See Chart below
Ripple and Noise
1% pk-pk max., 20MHz BW
Input-Output: 4,242Vdc,
Input-Ground: 1,500 Vac, Output-Ground: 500 Vdc
Line & Load Voltage Regulation
Line: +/- 1%, Load: +/-5%
Operating Temperature
0° to 40°C, no derating
(0 to 55°C for 5V model, see derating chart)
-30 to +85°C
Minimum Load
Case Material
Case Dimensions
Weight
Not required
Storage Temperature
Black 94V-0 Polycarbonate Relative Humidity
5% to 95%, non-condensing
0 to 10,000 ft
84 x 47 x 32mm. See outline drawing
110g
Altitude
Output Cable
Output Connector
#20AWG (UL2468), 1500mm, 2 conductor
2.5mm barrel type (Ault #3), center contact (+)
Other options available, contact the factory for details
EMC Specifications
Conducted Emissions
EN55022 Class B, FCC Part 15, Class B.
Radiated Emissions
EN55022 Class B, FCC Part 15, Class B.
EN61000-3-2, Class A
EN61000-3-3
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
Line Frequency Harmonics
Voltage Fluctuations/Flicker
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz.
Line Surge Immunity
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
EN61000-4-8, 3A/m
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
EN61000-4-11, Criteria B
________________________________________________________________________________________________________________________________ 1 of 3
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
CENB1010
Universal 10 Watt Series
ITE Switch-Mode Power Supply
3 Year Warranty
Model Number
Volts (V)
Output Current (max)
Max Watts
Ripple (Vp-p max)
CENB1010A0503F01
CENB1010A0603F01
CENB1010A0703F01
CENB1010A0903F01
CENB1010A1203F01
CENB1010A1503F01
CENB1010A1603F01
CENB1010A1803F01
CENB1010A2403F01
CENB1010A4803F01
5 V
6 V
7.5 V
9 V
12 V
15 V
16 V
18 V
24 V
48 V
2.00 A
2.00 A
1.60 A
1.10 A
1.00 A
0.80 A
0.75 A
0.67 A
0.50 A
0.25 A
10.0 W
12.0 W
12.0 W
10.0 W
12.0 W
12.0 W
12.0 W
12.0 W
12.0 W
12.0 W
50 mV
60 mV
75 mV
90 mV
120 mV
150 mV
160 mV
180 mV
240 mV
480 mV
Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.
Model Number Key
CENB 1 010 A VV 03 F 01
Model
"01" = Standard. "02" and higher indicates a modified model.
"F" = IEC320 C14 grounded, Other options available, see below
Input Connector:
Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory.
Output Voltage:
Model
"05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.
"A" = Original Configuration
Output Power:
# of Outputs
Product Family:
"010" = 10 Watts
"1" = Single Output
"C" = Commercial/ITE/Industrial, "E" = External, "NB" = Model Series Designator
AC Input Receptacle Options
Output Connector
Desktop
Wall-Plug
IEC320 - C14
Class I
Grounded
(F)
IEC320 - C18
Class II
IEC320 - C8
Class II
"Shaver"
(N)
N. America N. America
Europe
United
Kingdom
Fixed
Australia
Japan
Interchangable
(B)
Japan
Fixed
(C)
Ungro unded
Fixed
(M)
Fixed
(H)
(Q)
(G)
Notes:
1. For desktop options, choose applicable letter above.
Notes:
1. Ault #3 Connector, center contact (+).
2. For Wall-Plug options, choose the applicable letter above and the unit will be fitted with
the receptacle chosen. The N. A. blade version (B) will be an interchangeable blade.
The other options (C), (M), (G), and (H) will be fixed blades molded in the case.
3. Blade Kit is available which will include one each of a EU, UK, and Australian blade. Kit part #
is KT1027K. These can be used with the (B) version, to allow blades to be changed.
2. Connector is Switchcraft 760 plug or equivalent.
Mating connector is Switchcraft 712A or equivalent.
3. Other connector options are available. Contact your local
SL Power Representative for details.
Outline Drawings
Desktop Style
Wall-Plug Style (Option “B” Shown)
________________________________________________________________________________________________________________________________ 2 of 3
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
CENB1010
Universal 10 Watt Series
ITE Switch-Mode Power Supply
3 Year Warranty
Output Derating Chart (5V Model, 90-264Vac input range)
Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 9-23-2014
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
________________________________________________________________________________________________________________________________ 3 of 3
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
相关型号：
©2020 ICPDF网 联系我们和版权申明