CENB1030A2403F01 [SLPOWER]
ITE Switch-Mode Power Supply;型号: | CENB1030A2403F01 |
厂家: | SL Power Electronics |
描述: | ITE Switch-Mode Power Supply |
文件: | 总2页 (文件大小:266K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CENB1030
Universal 30 Watt Series
ITE Switch-Mode Power Supply
3 Year Warranty
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•Certified to UL/EN60950-1, 2nd Edition
•5Vto 48V outputs, up to 32W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No load Power Consumption <0.3W
•Limited Power Source
•Desktop & Wall Plug Styles
RoHS
LPS
Specifications
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
MTBF
>100,000 hours calculated
18 ms min. @ 115VAC, 60 msec @ 230VAC
2 seconds, max.
AC Input
100-240VAC, -/-10%, 47-63 Hz, 1∅
Input Current
Inrush Current
Input Fuse
Efficiency
100VAC: 0.9A Hold-up Time
60A peak, 264Vac, cold start
Turn-on Time
Topology
3.15A Internal Primary Current Fuse is provided
Switching – Fixed Frequency Flyback
Hiccup Mode
Meets EISA2007, CEC Efficiency Level V,
Overload Protection
and EU(EC) No. 278/2009 Phase II requirements
Output Voltage
Output Power
See chart
See chart
Short Circuit Protection
EMC
Hiccup Mode
See chart below
Ripple and Noise
1% pk-pk max., 20MHz BW
Safety Standards
Dielectric Withstand
EN/IEC/CSA/UL60950-1, 2nd Edition, LPS
Line & Load Voltage Regulation
Line: +/- 1%, Load: +/-5%
Input-Output: 4,242VDC, Input-GND: 1,500 Vac,
Output-GND: 500Vdc
Transient Response
Minimum Load
500μs max., 50% load step, typical
Not required
Operating Temperature
Storage Temperature
Relative Humidity
Altitude
0° to 40°C, no derating
-40° to +85°C
5% to 95%, non-condensing
0 to 10,000 ft
Case Material:
Black 94V0 Polycarbonate
Case Dimensions:
95 x 54 x 31mm. See outline drawing
Weight = 200g
Output Connector:
2.5mm barrel type (Ault #3) connector, Output Cable:
5V – 9V models: #18AWG (SPT-1), 1,500mm, 2 conductor
center contact (+). Other options available
12V – 48V models: #18AWG (UL1185), 1,500mm, 2 conductor
EMC Specifications
Conducted Emissions
Radiated Emissions
EN55022 Class B, FCC Part 15, Class B.
EN55022 Class B, FCC Part 15, Class B.
EN61000-3-2, Class A
Line Frequency Harmonics
Voltage Fluctuations/Flicker
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-3-3
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
EN61000-4-4, 2kV/5kHz.
Line Surge Immunity
Conducted RF Immunity
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
EN61000-4-8, 3A/m
EN61000-4-11, Criteria B
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
CENB1030
Universal 30 Watt Series
ITE Switch Mode Power Supply
3 Year Warranty
Model Number
Volts (V)
Output Current (max)
Max Watts
Ripple (Vp-p max)
CENB1030A0503F01
CENB1030A0703F01
CENB1030A0903F01
CENB1030A1203F01
CENB1030A1403F01
CENB1030A1503F01
CENB1030A1803F01
CENB1030A2403F01
CENB1030A4803F01
5 V
7.5 V
9 V
12 V
14 V
15 V
18 V
24 V
48 V
4.00 A
3.00 A
3.00 A
2.50 A
2.10 A
2.00 A
1.67 A
1.33 A
0.67 A
20.0 W
22.5 W
27.0 W
30.0 W
29.4 W
30.0 W
30.0 W
31.9 W
32.1 W
50 mV
75 mV
90 mV
120 mV
140 mV
150 mV
180 mV
240 mV
480 mV
Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.
Model Number Key
CENB 1 030 A VV 03 F 01
Model
"01" = Standard. "02" and higher indicates a modified model.
"F" = IEC320 C14 grounded, Other options available, see below
Input Connector:
Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory.
Output Voltage:
Model
"05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.
"A" = Original Configuration
Output Power:
# of Outputs
Product Family:
"030" = 30 Watts
"1" = Single Output
"C" = Commercial/ITE/Industrial, "E" = External, "NB" = Model Series Designator
AC Input Receptacle Options
Output Connector
Desktop
Wall-Plug
IEC320 - C14
Class I
Grounded
(F)
IEC320 - C18
Class II
IEC320 - C8
Class II
"Shaver"
(N)
N. America N. America
Europe
United
Kingdom
Fixed
Australia
Japan
Interchangable
(C)
Japan
Fixed
(B)
Ungro unded
Fixed
(M)
Fixed
(H)
(Q)
(G)
Notes:
1. For desktop options, choose applicable letter above.
Notes:
1. Ault #3 Connector, center contact (+).
2. For Wall-Plug options, choose the applicable letter above and the unit will be fitted with
the receptacle chosen. The N. A. blade version (C) will be an interchangeable blade.
The other options (B), (M), (G), and (H) will be fixed blades molded in the case.
3. Blade Kit is available which will include one each of a EU, UK, and Australian blade. Kit part #
is KT1027K. These can be used with the (C) version, to allow blades to be changed.
2. Connector is Switchcraft 760 plug or equivalent.
Mating connector is Switchcraft 712A or equivalent.
3. Other connector options are available. Contact your local
SL Power Representative for details.
Outline Drawings
DATE
CODE
Desktop Style
Wall-plug Style “C” Option Shown (with KT1027K interchangeable blade kit)
Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 9-22-14
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
相关型号:
©2020 ICPDF网 联系我们和版权申明