GLM110 [SLPOWER]

110 Watt Global Performance Switchers;


型号：	GLM110
厂家：	SL Power Electronics
描述：	110 Watt Global Performance Switchers
文件：	总2页 (文件大小：309K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GLC110 Commercial/GLM110 Medical

110 Watt Global Performance Switchers

GLOBAL PERFORMANCE SWITCHERS

FEATURES:

• Cost-eﬀective power source

• Single- and dual-output units

• Low height (1.30”)

• 2-year warranty

• Power fail signal standard

• Commercial Approved to UL60950-1, EN60950-1,

CSA22.2 No. 950-95 3rd Ed.

• Medical Approved to UL2601-1, EN60601-1,

CSA-C22.2 No. 601.1

• Complies with EN61000-3-2 Class A

• RoHS Compliant Model Available (G suﬃx)

SPECIFICATIONS

Ac Input

90-264 Vac, 47-63 Hz single phase.

Transient Response

Input Current

Main Output: 500 μs typical response time for return to within 0.5% of ﬁnal value

for a 50% load step change, ∆i/∆t<0.2 A/μs. Maximum voltage deviation is 3.5%.

Startup/shutdown overshoot less than 3%. Turn-On Time less than 1 second at 120

Vac, 25.

Maximum input current at 90 Vac, 60 Hz with full rated output load not to

exceed 2.9 A.

Hold-up Time

20 ms minimum from loss of ac input at full load, nominal line (120 Vac).

Overvoltage Protection

Built in on main output.

Output Power

Normal continuous output power is 75 W for unrestricted natural convection,

or 110 W with 26 cfm air ﬂow.

Eﬃciency

72-85% depending on model.

Output Regulation

Input Protection

Load regulation on dual output models is measured by 40% load change

from 60% rated load and input voltage change from minimum to maximum

ratings.

Internal ac fuse provided on all units. Designed to blow only if a catastrophic

failure occurs in the unit.

Inrush Current

Output #1 requires 1A minimum load for proper regulation of other outputs.

Initial set tolerance is measured with all outputs at 60% of full rated load.

Load regulation for single-output models measured by changing load from

5% to 50% load or 50% to full load in either direction.

Inrush limited by internal thermistors. Inrush at 240 Vac, averaged over the ﬁrst ac

half-cycle under cold start conditions will not exceed 37 A.

Temperature Coeﬃcient

0.03%/°C typical on all outputs.

Voltage Adjustment

Output #1 adjustment is 5%. Note: output #1 must not be more than 1%

below nominal to achieve full output regulation on output #2. High voltage

settings may degrade the reliability of the unit due to excessive power

EMI/EMC Compliance

All models include built-in EMI ﬁltering to meet the following emissions require-

ments:

dissipation in some outputs.

EMI SPECIFICATIONS

COMPLIANCE LEVEL

Overload Protection

Fully protected against short circuit and output overload. Short circuit protec-

tion is cycling type power limit. Factory set to begin power limiting at 120 W.

Conducted Emissions GLC110

Conducted Emissions GLM110

Static Discharge

RF Field Susceptibility

Fast Transients/Bursts

Surge Susceptibility

Line Frequency Harmonics

EN55022 Class B; FCC Class B

EN55011 Class B: FCC Class B

EN61000-4-2, 6 kV contact, 8 kV air

EN61000-4-3, 3 V/meter

EN61000-4-4, 2 kV, 5 kHz

EN61000-4-5, 1 kV diﬀ., 2 kV com.

EN61000-3-2 Class A

Output Noise

0.5% rms, 1% pk-pk, 20 MHz bandwidth, diﬀerential mode. Measured with

noise probe directly across output terminals of the power supply.

POWER FAIL

Power fail signal is TTL or CMOS compatible (output goes low <0.5 V) 5 ms

before output voltage drops more than 4% below nominal voltage upon

loss of AC power. The signal is factory set to trip on 84 to 94 Vac brown-out

depending upon incoming line impedance and distortion. Other settings are

available to the user through adjustment of built in potentiometer (consult

factory for assistance). Output will stay low for 20 ms minimum.

Commercial Safety

All GLC models are approved to UL60950-1, CSA22.2 No. 950-95 3rd Ed, and

EN60950-1.

Medical Safety

All GLM models are approved to UL2601-1, CSA-C22.2 No. 601.1, EN60601-1.

All speciﬁcations are typical at nominal input, full load at 25^OC unless otherwise stated

Commercial Medical

Model Model

RoHS

Suﬃx*

Output Output

No.

Output

Minumum

Output

Normal (A)

Forced Air Output Peak

(B)

Noise P-P

OVP

Total Regu-

lation ( C )

GLC110-212 GLM110-212

GLC110-215 GLM110-215

GLC110-524 GLM110-524

+12 V

-12 V

+15 V

-15 V

+24 V

+5 V

1 A

0 A

1 A

0 A

1 A

0 A

6.3 A

2.5 A

5 A

9.1 A

3 A

9.5 A

4 A

100 mV

120 mV

150 mV

200 mV

50 mV

15.6 1.1 V

7.3 A

3 A

7.7 A

4 A

18.5 1.5 V

2.5 A

3.2 A

1.5 A

6.3 A

5 A

4.6 A

2 A

4.75 A

2.5 A

9.5 A

7.7 A

5 A

28 2.5 V

6.2 0.6 V

15.6 1.1 V

18.5 1.5 V

28 2.5 V

GLC110-12

GLC110-15

GLC110-24

GLM110-12

GLM110-15

GLM110-24

12 V

9.1 A

7.3 A

4.6 A

120 mV

150 mV

240 mV

15 V

24 V

3.2 A

* Add “G”suﬃx to part number for RoHS compliant model. Contact factory for availability.

A. Rating with unrestricted convection cooling. Total power not to exceed 75 W; no output can exceed rated current.

B. Rating with 26 cfm forced air cooling. Total power not to exceed 110 W.

C. To maintain regulation V1 current must be at least 1/5 of V2. V1 must not be adjusted more than 1% below nominal and have at least 10% of rated load.

GLC110/GLM110 MECHANICAL SPECIFICATIONS

ENVIRONMENTAL SPECIFICATIONS OPERATING

NON-OPERATING

-40 to +85°C

0 to 95% RH

40 g_pk

A. Units should be allowed to warm up/operate under non-condensing

conditions before application of power. Derated output current and toal

output power by 2.5% per °C above 50°C.

Temperature (A)

Humidity (A)

Shock (C)

0 to 50°

0 to 95% RH

20 g_pk

B. Random vibration—10 to 2000Hz, 6dB/octave roll-oﬀ from 350 to

2000Hz, 3 orthogonal axes. Tested for 10 min./axis operating and 1

hr./axis non-operating.

Altitude

-500 to 10,000 ft

-500 to 40,000 ft

C. Shock testing—half-sinusoidal, 10 3 ms duration, direction, 3

orthogonal axes, total 6 shocks.

Vibration (B)

1.5 g _rms’0.003 g²/Hz 5 g _rms’0.026 g²/Hz

SL Power Electronics Corp, 6050 King Drive, Bldg. A, Ventura, CA 93003, USA. Phone:(805) 486 4565 Fax:(805) 487 8911 Email: info@slpower.com Rev. 02/11/10.

However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Speciﬁcations are subject to change without notice.

相关型号：