GPFC160-15 [SLPOWER]

160 Watt Global Performance Switchers; 160瓦的全球绩效切换器


型号：	GPFC160-15
厂家：	SL Power Electronics
描述：	160 Watt Global Performance Switchers 160瓦的全球绩效切换器
文件：	总2页 (文件大小：245K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GPFC160 Commercial

160 Watt Global Performance Switchers

FEATURES:

• 3.0 watts/cu.in. power density

• Compact size (4.5" x 7.0" x 1.7"; meets 1U height)

• Power factor corrected to IEC 1000-3-2; Class A

• Less than 300 µA leakage

• EMI compliance to CISPR22, FCC Class B

• Commercial Approved to UL1950, IEC950, EN60950

and CSA 22.2 No. 950

• 2-year warranty

marked to LVD

•

SPECIFICATIONS:

Ac Input

Input Protection

85-264 Vac, 47-63 Hz single phase.

Internal ac fuse provided on all models. Fuse does not

blow on overload or short circuit—fuse blows only if

catastrophic failure occurs in the unit.

Input Current

Maximum input current 2.3 A at 90 Vac, 60 Hz with full

rated load. Input current harmonic content meets the

requirements of IEC1000-3-2.

Inrush Current

Inrush 240 Vac is less than 37 A, averaged over the first

ac half-cycle under cold start conditions. Limiting pro-

vided by internal thermistors.

Hold-upTime

25 ms minimum from loss of ac input at full load, nominal

line (115 Vac).

Fan Output

An additional 12 Vdc, 250 mA output suitable for power-

ing a dc fan is included in all models. The output is

protected by an internal PTC in the event of an overload.

Output Power

Total regulation is the maximum deviation from the

nominal voltage for all steady-state loading conditions.

Each individual output is to be used within its specified

limits of that output. Peak ratings are for 60 s maximum

duration, 10% duty cycle.

Thermal Shutdown

Provided as a standard feature. Designed to protect the

unit from prolonged over temperature.

Overload Protection

Power Fail

Fully protected against short circuit and output overload.

Short circuit protection is cycling type power limit.

Recovery after fault is automatic.

TTL or CMOS compatible output goes low (<0.5 V) 8 ms

before output voltage drops more than 4% below nominal

voltage upon loss of ac power. The signal is factory set to

trip when input power can no longer sustain the output.

Output Noise

0.5% rms, 1% pk-pk, 20 MHz Bandwidth, differential

mode. Measured with noise probe directly across output

terminals of the power supply.

Temperature Coefficient

0.03%/°C typical on all outputs.

EMI/EMC Compliance

All models include built-in EMI filtering to meet the

following emissions requirements:

EMI SPECIFICATIONS

Conducted Emissions

Static Discharge

RF Field Susceptibility

Fast Transients/Bursts

Surge Susceptibility

Transient Response

500 ms typical response time for return to within 0.5% of

final value for a 50% load step change, ∆i/∆t< 0.2 A/ms.

Maximum voltage deviation is 3.5%.

COMPLIANCE LEVEL

EN55022 Class B; FCC Class B

EN61000-4-2, 6 kV contact, 8 kV air

EN61000-4-3, 3 V/meter

EN61000-4-4, 2 kV, 5 kHz

EN61000-4-5, 1 kV diff., 2 kV com.

Remote Sense

Provided as a standard feature. Capable of compensating

for 0.25 V total of cabling losses.

Overvoltage Protection

Commercial Safety

Built in on all models. OVP crowbar reduces output

voltage below nominal rating in less than 50 ms.

Approved to UL1950, CSA22.2 950, IEC950, and

EN60950. UL file #E135803 commercial; CSA #LR46516.

The output(s) are intended for safety earthed Signal

Output and Intermediate Circuits only. All dc outputs are

SELV under normal and single fault conditions.

Voltage Adjustment

Main output ±5%.

Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033

800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com

GPFC160 Commercial 160 Watt Single Output

Output

Model

Output No.

Output

5.1 V

12 V

15 V

24 V

28 V

48 V

Maximum (A)

Peak (B)

OVP Setpoint

6.2 ± 0.6 V

14 ± 1.1 V

18.5 ± 1.5 V

28 ± 2.5 V

34 ± 2.8 V

55 ± 4.0 V

Ripple & Noise

GPFC160-5

GPFC160-12

GPFC160-15

GPFC160-24

GPFC160-28

GPFC160-48

25 A

11.7 A

9.3 A

5.8 A

5 A

31.3 A

13.3 A

10.7 A

6.7 A

5.7 A

2.9 A

3.4 A

A. Output rating with unrestricted convection cooling.

B. Output rating with 26 cfm airflow.

GPFC160 MECHANICAL SPECIFICATIONS

Environmental

Operating

Non-operating

Specification

Temperature (A)

Humidity (A)

Shock (B)

0 to 50^oC

0 to 95% RH

20 g_pk

-40 to +85^oC

0 to 95% RH

40 g_pk

A. Units should be allowed to warm up/operate under non-condensing conditions

before application of power. Derated output current and total output power by

2.5% per 50ºC.

Altitude

-500 to 10,000 ft

1.5 g_rms, 0.003 g²/Hz

-500 to 40,000 ft

5 g_rms, 0.026 g²/Hz

B. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to 2000Hz, 3

orthogonal axes.Tested for 10 min./axis operating and 1 hr./axis non-operating.

C. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3 orthogonal axes,

total 6 shocks.

Vibration (C)

Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033

800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com

相关型号：