MB65S48K [SLPOWER]
65W Single Output Medical Series;
| 型号： | MB65S48K |
| 厂家： | 
SL Power Electronics |
| 描述： | 65W Single Output Medical Series |
| 文件： | 总10页 (文件大小：2383K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MB65S
65W Single Output
Medical Series
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
2” x 3.5’ x 1.3” Package, Ideal for 1U Applications
10-year life design with Premium E-Caps
65 Watts convection cooled
Class I and Class II models
Class B Conducted and Radiated EMI Performance
BF Isolation Type Rated
Designed to meet new IEC 60601-1-2 4th Edition
EMC Requirements
ꢀ
Approved to AAMI ES/CSA C22.2/EN/IEC60601-1,
3rd Edition
ꢀ
ꢀ
ꢀ
2 x MOPP Isolation
Internal Temperature Monitor, DC – OK Signal, LED
3 Year Warranty
Description
A superior performance 65 Watt AC to DC power supply designed for next generation medical applications. Feature rich
and highly efficient, MB65 product family can easily fit in a 1U chassis and provides 65 Watts of convection power. Input
& output and internal temperature monitoring/alarms are features of the MB65 family. All models are CE marked to low
voltage directive and approved to AAMI ES/CSA C22.2 No./EN/IEC60601-1, 3rd edition. The design takes into
consideration the pending international release of the new IEC 60601-1-2, 4th Edition EMC requirements. With low
leakage current performance, the power supplies are BF rated.
Model Selection
Model
Number
MB65S12K
Output Current
(Convection Cooled)
5.4A
Total
Regulation
1%
OVP
Threshold
17.3 2.4V
Efficiency1
Class
Volts
Ripple &Noise2
Class I
12V
88%
0.5%
MB65S12C
MB65S15K
MB65S15C
MB65S24K
MB65S24C
MB65S48K
MB65S48C
Class II
Class I
Class II
Class I
Class II
Class I
Class II
12V
15V
15V
24V
24V
48V
48V
5.4A
4.3A
4.3A
2.7A
2.7A
1.35A
1.35A
88%
88%
88%
89%
89%
90%
90%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1%
1%
1%
1%
1%
1%
1%
17.3 2.4V
20.1 2.4V
20.1 2.4V
29.3 3.5V
29.3 3.5V
55.5 4.5V
55.5 4.5V
Notes:
1) Efficiency, Typical at 115/230Vac, 25°C. See Charts below for load conditions.
2) Measured at 25C using 6 inch twisted pair wires with noise probe directly across output terminals, and load terminated with 0.1µF ceramic and 10µF
low ESR capacitors.
3) Part number suffix to include “K” for Class-1 AC input, or “C” suffix for Class-2 AC Input
Consult Factory for following Models, availability may vary.
Class I
MB65S18K
MB65S18C
MB65S28K
MB65S28C
MB65S32K
MB65S32C
18V
18V
28V
28V
32V
32V
3.6A
3.6A
2.3A
2.3A
2.0A
2.0A
89%
89%
89%
89%
89%
89%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1%
1%
1%
1%
1%
1%
21.7 2.5V
21.7 2.5V
35.2 3.5V
35.2 3.5V
41.5 4.5V
41.5 4.5V
Class II
Class I
Class II
Class I
Class II
www.slpower.com
MB65S Aug -14
1
MB65S
65W Single Output
Medical Series
General Specifications
85-264Vac, single phase.
(Safety Approved to 90-264Vac).
<2 Seconds at 110Vac.
AC Input
Input Current
Inrush Current
I²T Characteristic
Turn On Time
Rise Time
1.5A at 110Vac, 1A at 240Vac
<30mS, 48V model: < 40mS
40Arms Maximum within a half line cycle, cold
start at 25C. See application note.
20mS min. from loss of AC input at 110 Vac, full load,
25°C.
Hold-up Time
Over Load
Protection (OCP)
115% - 200% of rated output current value. Hiccup
Mode, Auto-recovery
See Table below.
Turn-On Input
Voltage
Short Circuit
Protection (SCP)
Short across the output terminals will not cause
damage to the unit. Hiccup Mode , Auto-recovery
>75Vac ± 8Vac. Full spec performance at 85Vac.
<63Vac ± 8Vac
Turn-Off Input
Voltage
Over Voltage
Protection (OVP)
Latches off when output voltage is with range as
shown in table. Requires AC Power cycle to reset
Over Temperature
Protection (OTP)
Power shuts down at temperature of 70 (typical)
at full load. Hiccup Mode , Auto-recovery
3.15A, 250Vac, line and neutral inputs
Input Fuses
Outputs protected against momentary reverse
current less than 20A peak for less than 10mS with
0.5A average. Sustained reverse current at high
levels may damage unit.
Earth Leakage
Current
Output Reverse
Voltage Protection
<350 µA@264Vac, 60Hz input, NC
Patient Leakage
Current (Output to
Earth)
Input-Output:
Input-Ground: 1900Vac, 1 x MOPP
Output-Ground: 1900Vac, 1 x MOPP
4500Vac, 2 x MOPP
<4 mA@264Vac, 60Hz input, NC for BF rating
Isolation
<90 µA@264Vac, 60 Hz input, NC, also suitable for
BF rating
<450 µA@264Vac, 60Hz input, SFC, also suitable
for BF rating
-20°C to +70°C.
Turn on Temperature = -40°C at >=120Vac, allowing
[x] seconds for stabilization.
Turn-On &
Operating
Temperature
Touch
Current
De-rated output power at 70°C = 45.5W
Storage
Temperature
<0.5W
-40°C to +85°C
No Load Input Power
Efficiency
88% - 90% typical at 115/230Vac, 25°C. See chart
for additional details
Operating:
Non-operating: -500 to 40,000 feet
-500m to 3000m
Altitude
65W continuous convection cooled, -20C to 50°C
ambient. 85Vac to 264Vac. See chart for de-
rating above 50°C.
5% to 95%, non-condensing
Output Power
Relative Humidity
Operating: Half-sine shock waveform. Impact
Acceleration: 20g, Pulse duration: 11mS.
Cycles: 3 times per axis in X,Y, Z direction
Non-Operating: Half-sine shock waveform. Impact
Acceleration: 100g, Pulse duration: 6mS
Cycles: 3 times per direction on 3 axes (X,Y. Z)
Operating: Sinusoidal Frequency: 10-500Hz,
Impact Acceleration: 1g, Sweep rate: 1 octave/min
Cycles: 10 times per axis in X, Y, Z direction
Random Vibration:
500µS typ. response time for return to within
Shock
(IEC 60068-2-27)
Transient Response 0.5% of final value for a 50% load change, ∆i/∆t<
0.2A/µs. Max. volt. deviation is ±3.5%.
Vibration
(IEC 60068-2-6)
(IEC 60068-2-64)
0.5% pk-pk
Ripple and Noise
Operating: 0.003g2/Hz, 1.224grms overall, 3 axes,
10 min per axis, 1-500Hz.
Non-Operating: 0.02g2/Hz, 3.1grms overall, 3 axes,
1 hour per axis, 20-500 Hz
12V to 48Vdc. See models chart for part
numbering.
564,500 hours (ave) @ 110Vac, 25°C, SR332 Issue 6.
Output Voltage
MTBF
Consult Factory
@ 220Vac, 25°C, SR332 Issue 6.
>10 Years in use condition of 40°C ambient, at
12h/day, 261 days/year. Additional information on
other use profiles available on request.
+/- 10%, 48V is +/- 5%
E-Cap Life
Voltage Adjustability
www.slpower.com
MB65S Aug -14
2
MB65S
65W Single Output
Medical Series
General Specifications (Continued)
<2% overshoot at turn-on, <1% overshoot at turn-
off, under all conditions.
Class 2
Overshoot
IPC 610
IEC 60601-1, 3rd Edition
ANSI/AAMI ES60601-1 (2008)
CAN/CSA – C22.2 No 60601-1 (2005)
DEMKO EN60601-1:2006
Designed to meet China Safety Doc. No. GB4943.1-
2011 at 5Km, Tropical Standard at 40°C, 93% RH at
120 hours.
HF Common Mode
Noise
0.8 Vrms maximum (input class I)
Safety Standards
±1.0 % for all models.
Not required.
140g, typical
Total Regulation
Minimum Load
Weight
W: 2.0” x L: 3.5” x H: 1.3”
W: 50.8mm x L: 88.9mm x H: 33.02mm
Dimensions
Additional Outputs
During normal operation, this signal is logic HIGH.
Provides resistive value indicating internal
temperature of power supply. See Temp Sensor
Conversion Table below.
Signal will go LOW for output less than
%
(typical) of nominal. Green LED will light on PCB
top side during normal operation.
DC OK:
PSU Temperature
EMI/EMC Compliance
EN55011/22: Class B, FCC Part 15. Class B: 6db margin typ, Class 1 PSU
configuration
Conducted Emissions
EN55011/ 22: Class B, FCC Part 15. Class B: 2db margin typ, Class 2 PSU
configuration
EN55011/22: Class B, FCC Part 15. Class B: 3db margin typ, Class 1 PSU
configuration.
Radiated Emissions
EN55011/22: Class B, FCC Part 15. Class B: 3db margin typ, Class 2 PSU
configuration.
IEC61000-3-2: Class A
IEC 61000-3-3
Harmonic Current Emissions
Voltage Fluctuations & Flicker
Electro Static Discharge Immunity
IEC61000-4-2: Level 4, 8kV Contact Discharge, 15kV air discharge, Criteria A.
Also meets proposed IEC60601-1-2, 4th edition, Table 4
IEC61000-4-3: Level 3, 10V/m, Criteria A. 80MHz-1000 MHz and 3V/m 1.4Ghz
to 2.7 GHz. 80% AM at 1kHz. Also meets proposed IEC60601-1-2, 4th edition,
Table 4
Radiated RF EM Fields Susceptibility
[IEC60601-1-2: 4th edition, Table 4]
IEC61000-4-8: Level 5, 30A/m, 50/60 Hz
[TBD]
Proximity Fields from RF wireless communications Equipment
Rated Power Frequency magnetic fields
Low Frequency magnetic fields
IEC61000-4-4: Level 3, 2KV, 100Khz rep rate, 40A (PS Output), Criteria A
IEC61000-4-4: Level 3, 1kV, 20A, (Other Outputs), Criteria B
Electrical Fast Transients /Bursts
Also meets proposed IEC60601-1-2, 4th edition standard, Table 5 & 6.
IEC61000-4-5: Level 3, +/-1kV DM, +/-2kV CM, Criteria A
Also meets proposed IEC60601-1-2, 4th edition standard, Table 5.
Surges Line to Line (DM) and Line to Ground (CM)
Conducted Disturbances induced by RF Fields
Rated Power Frequency Magnetic Fields Test
IEC61000-4-6: 3V/m & 10 V/m – 0.15 to 80Mhz and 10V/m in ISM and amateur
radio bands between 0.15 MHz and 80 MHz, 80% AM at 1 KHz
Also meets proposed IEC60601-1-2, 4th edition standard, Table 5 & 6 & 8.
IEC61000-4-8: Level 4 (30A/m), Criteria A
Also meets proposed IEC60601-1-2, 4th edition standard, Table 4 enclosure port.
IEC61000-4-11: 100% dip for 10mS, at 0°, 45°, 90°, 135°, 180°, 225°, 270° and
315°, Criteria A; 60% dip for 100mS, Criteria B; 30% dip for 500mS (25/30 cycles)
1∅, and 0° for 500mS, Criteria A. Also meets proposed IEC60601-1-2, 4th edition
standard, Table 5.
Voltage Dips
Enclosure Port Immunity to RF wireless
communications equipment
Notes: Performance criteria are based on definitions contained in EN55024. Performance criteria are:
IEC61000-4-3
A – Normal performance during and after the test, B – Temporary degradation, self-recoverable, C – Temporary degradation, operator intervention required to recover the operation, D – Permanent
damage may occur
www.slpower.com
MB65S Aug -14
3
MB65S
65W Single Output
Medical Series
Isolation Specifications
Parameter
Conditions/Description
Min
Nom
Max
Units
Input/Ground
Input/Output
Output/Ground
1 MOPP
2 MOPP
1 MOPP
Insulation Safety Rating
Input/Ground
Input/Output
Output/Ground
1900
4500
1900
Vac
Vac
Vac
Electric Strength Test Voltage
-
-
Mechanical Drawing
Connector Information
DC Output
Input Connector
J1
Connector
J2
Ground Connector
G1
Signal Connector
J3
PIN 1) AC Line
PIN 2) Empty (removed)
PIN 3) AC Neutral
Pin 1) (+V1)
Pin 2) (+V1)
Pin 3) (RTN)
Pin 4) (RTN)
FG
PIN 1) RTN
PIN 2) DC_OK
Pin 3) TEMP SEMSOR (+)
Pin 4) TEMP SEMSOR (-)
Mating Connector:
0.187” Quick-
connect tab
Mating Connector:
Mating Connector:
Mating Connector:
Molex 01-90020005
Tyco/AMP 640250-3
Pins: 640252-2
Tyco/AMP 640250-4
Pins: 640252-2
Tyco/AMP 1375820-4
Pins: 1375819
www.slpower.com
MB65S Aug -14
4
MB65S
65W Single Output
Medical Series
1.DC-OK signal (J-3):
During normal operation, this signal is logic HIGH for output more than 85% (typical) of normal. Signal will go LOW for
output less than 80% (typical) of normal. Green LED will light on PCB top side during normal operation.
2. Temperature sensor signal (J-3):
Internal Temperature Sensor Conversion Table
Resistance Value across connector J3,
Internal
Temperature
-20℃
pins 3-4
6,040K ohms
3,227K ohms
1,788K ohms
1,025K ohms
605.1K ohms
367.6K ohms
229.2K ohms
146.4K ohms
95.62K ohms
63.80K ohms
43.40K ohms
30.07K ohms
21.19K ohms
-10℃
0℃
10℃
20℃
30℃
40℃
50℃
60℃
70℃
80℃
90℃
100℃
Notes: 1) Tolerances: -20°C to 60°C: +/- 4°C; 70°C to 80°C: +/- 5°C; 90°C to 100°C: +/- 6°C
.
www.slpower.com
MB65S Aug -14
5
MB65S
65W Single Output
Medical Series
3. Timing Sequence
4. Protection
All specifications apply over specified input voltage, output load, and temperature range, unless otherwise
noted.
Parameter
Input Fuses
Conditions/Description
Not user accessible
Min
Nom
Max
Units
Input Transient Protection
2KV(CM) and 1KV(DM) surge
2
KV (CM)
No-load and short circuit proof
short circuit proof
overload
Hiccup
Output
Hiccup
Hiccup
Latch
Overvoltage Protection
Latch style
Over temperature Protection
Automatic power shutdown at TA = 80°C(typical)
5. Inrush Current, peak (I2T rating)
Measured at 264Vac, 50°C at 100% loading, 70°C at de-rated load condition
50°C
-
I2T rating
70°C
-
I2T rating
(A2Seconds, Typical)
(A2Seconds, Typical)
Model
12V Model
8.5
11.0
15V Model
24V Model
48V Model
6.5
13.2
12.2
11.1
10.9
10.4
www.slpower.com
MB65S Aug -14
6
MB65S
65W Single Output
Medical Series
6. Characteristic Curves
6.1 Output vs. Temperature
65W convection cooled at -20°C to 50°C operating ambient temperature. De-rated output power to 45.5W at 70°C.
6.2 Efficiency vs. Loading at AC Input Voltages
High efficiency is achieved by using QR technology. Synchronous MOSFETs or ultra-fast diodes are used as rectifiers in
MB65S family.
www.slpower.com
MB65S Aug -14
7
MB65S
65W Single Output
Medical Series
6.3 Efficiency vs. Loading
The charts below detail the MB65 efficiency vs input voltage and output loading conditions at 25°C, 50°C and
70°C under de-rated power.
25°C ambient
50°C Ambient
70°C
Ambient
6.4 Ripple & Noise
Measured using a scope probe socket with 0.1µF ceramic and a 10µF electrolytic capacitor connected in
parallel across it. Bandwidth limit is 20MHz.
12V OUT, N
O
L
OAD, 85VAC, 60H
Z
12V OUT, FULL LOAD, 85VAC, 60HZ
www.slpower.com
MB65S Aug -14
8
MB65S
65W Single Output
Medical Series
6.4 Ripple & Noise (Cont’d)
12V OUT, N
O
L
OAD, 264VAC, 50H
Z
12V OUT, FULL LOAD, 264VAC, 50HZ
6.5 Output Transient Response
50% load step within the regulation limits of minimum and maximum load, dI/dt< 0.2A/µSec. Recovery time not
specified as there are no lapse in regulation with a 50% Load Step. Maximum voltage deviation is 3.5%
5%~50% Load Transient (AC) at 25°C@115V 50%~100% Load Transient(AC) at 25°C@115V
www.slpower.com
MB65S Aug -14
9
MB65S
65W Single Output
Medical Series
6.6 Output Overload Characteristic
Supply protects itself against overload conditions. The Power Supply recovers from Overload Conditions
without operator intervention.
12v out, 100Vac
12V out, 240Vac
6.7 Turn-On Time
12v out, FULL Load, 115Vac
12V out, Full Load, 230Vac
Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be
correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from
reproduction errors or inaccuracies. Specifications are subject to change without notice.
www.slpower.com
MB65S Aug -14
10
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明