C-15622C-TDFB3-SST4 [SOURCE]

Fiber Optic Device;
C-15622C-TDFB3-SST4
型号: C-15622C-TDFB3-SST4
厂家: SOURCE PHOTONICS, INC.    SOURCE PHOTONICS, INC.
描述:

Fiber Optic Device

文件: 总7页 (文件大小:753K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
622 Mbps DFB Laser Single Mode Transceiver(LH)  
C-1X-622(C)-TDFB(3)-SST(FC)4  
Features  
• ST/FC Duplex Single Mode Transceiver  
• Industry Standard 1x9 Footprint  
• Complies with SONET OC-12 SDH STM-4  
• Single +3.3V/5V power supply  
• Operating Temperature Range 0 to 70ºC  
• PECL Differential Inputs and Outputs  
• TTL/LVTTL Signal Detection Output  
[C-1X-622C-TDFB(3)-SST(FC)4]  
• PECL/LVPECL Signal Detection Output  
[C-1X-622-TDFB(3)-SST(FC)4]  
• Wave Solderable and Aqueous Washable  
• Uncooled laser diode with MQW sturcture  
• Complies with Bellcore GR-468-CORE  
• ATM 622 Mbps Link application  
• SONET/SDH Equipment Interconnect application  
• RoHS compliance available  
Absolute Maximum Rating  
Parameter  
Symbol  
Vcc  
Min.  
0
Max.  
6.0  
Unit  
V
Note  
Power Supply Voltage  
C-1X-622-TDFB-SST(FC)4  
C-1X-622-TDFB3-SST(FC)4  
Power Supply Voltage  
Output Current  
Vcc  
0
0
3.6  
30  
V
mA  
ºC  
Iout  
Soldering Temperature  
Storage Temperature  
-
240  
85  
10 seconds on leads only  
-
Tstg  
-40  
ºC  
Recommended Operating Condition  
Parameter  
Symbol  
Vcc  
Min.  
4.75  
3.1  
0
Typ.  
5
Max.  
Unit  
Note  
Power Supply Voltage  
Power Supply Voltage  
Operating Temperature (Case)  
Data Rate  
5.25  
3.5  
70  
-
V
V
C-1X-622-TDFB-SST(FC)4  
C-1X-622-TDFB3-SST(FC)4  
Vcc  
3.3  
-
Topr  
-
ºC  
-
622  
Mbps  
Transmitter Specifications  
Parameter  
Symbol  
Min  
Typical  
Max  
Unit  
Notes  
Optical  
Po  
λ
-3  
1260  
1480  
-
-
1310  
1550  
-
+2  
dBm  
nm  
nm  
nm  
dB  
Optical Transmit Power  
Output center Wavelength  
Output center Wavelength  
Output Spectrum Width  
Side Mode Suppression Ratio  
Extinction Ratio  
1360  
C-13-622-TDFB(3)-SST(FC)4  
λ
1580  
C-15-622-TDFB(3)-SST(FC)4  
-20 dB width  
λ  
Sr  
ER  
1
-
30  
35  
10  
-
-
dB  
Output Eye  
Compliant with ITU recommendation G.957  
Optical Rise Time  
tr  
tf  
-
-
-
-
-
-
1.2  
1.2  
ns  
ns  
10% to 90% Values  
10% to 90% Values  
Optical Fall Time  
Relative Intensity Noise  
RIN  
-120  
dB/Hz  
Measured with 223-1 PRBS with 72 ones and  
72 zeros.  
Total Jitter  
TJ  
-
-
0.55  
ns  
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486  
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213  
LUMINENTOIC.COM  
LUMNDS857-Jun0306  
Rev A.1  
1
622 Mbps DFB Laser Single Mode Transceiver(LH)  
C-1X-622(C)-TDFB(3)-SST(FC)4  
Transmitter Specifications  
Parameter  
Symbol  
Min  
-
Typical  
-
Max  
150  
Unit  
mA  
Notes  
Electrical  
Maximum current is specified at Vcc=  
Maximum @ maximum temperature  
ICC  
IIL  
Power Supply Current  
Data Input Current-Low  
Data Input Current-High  
Differential Input Voltage  
Data Input Voltage-Low  
-350  
-
-
-
-
-
-
350  
-
µA  
µA  
mV  
V
I
IH  
VIH-VIL  
300  
-2.0  
VIL-VCC  
-1.58  
These inputs are compatible with 10K, 10KH  
and 100K ECL and PECL inputs  
Data Input Voltage-High  
VIH-VCC  
-1.1  
-
-0.74  
V
Receiver Specifications  
Parameter  
Symbol  
Min  
Typical  
Max  
Unit  
Notes  
Optical  
-10  
Sensitivity  
-
-
-3  
-
-
-28  
dBm  
dBm  
dBm  
dBm  
dB  
Measured with 223-1 PRBS,BER= 10  
Maximum Input Power  
Signal Detect-Asserted  
Signal Detect-Deasserted  
Signal Detect-Hysteresis  
Wavelength of Operation  
Pin  
Pa  
Pd  
-
-28  
-
-
-
Measured on transition: low to high  
Measured on transition: high to low  
-40  
0.5  
1100  
-
3
-
-
1600  
nm  
Receiver Specifications  
Parameter  
Symbol  
Min  
Typical  
Max  
Unit  
Note  
Electrical  
ICC  
-
-
-
-
-
-
100  
mA  
V
The current excludes the output load current  
Power Supply Current  
Data Output Voltage-Low  
VOL -Vcc  
-2.0  
-1.1  
-2.0  
-1.1  
-1.58  
-0.74  
-1.58  
-0.74  
These outputs are compatible with 10K,  
10KH and 100KECL and PECL outputs  
Data Output Voltage-High  
VOH-  
V
Vcc  
Signal Detect Output Voltage-Low VSDL-Vcc  
Signal Detect Output Voltage-High Vcc  
V
V
VSDH-  
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486  
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213  
LUMINENTOIC.COM  
LUMNDS857-Jun0306  
Rev A.1  
2
622 Mbps DFB Laser Single Mode Transceiver(LH)  
C-1X-622(C)-TDFB(3)-SST(FC)4  
Connection Diagram  
Receiver Signal Ground  
1. (Rx GND)  
2. (Rx +)  
3. (Rx-)  
Receiver Data Out  
NC  
Receiver Data Out Bar  
Signal Detect  
4. (SD)  
Receiver Power Supply  
5. (Rx Vcc)  
6. (Tx Vcc)  
7. (TX-)  
8. (TX+)  
9. (Tx GND)  
Top View  
Transmitter Power Supply  
Transmitter Data In Bar  
Transmitter Data in  
NC  
Transmitter Signal Ground  
PIN  
Symbol  
RxGND  
RD+  
Notes  
Directly connect this pin to the receiver ground plane  
See recommended circuit schematic  
1
2
3
4
5
6
7
8
9
RD-  
See recommended circuit schematic  
SD  
Active high on this indicates a received optical signal  
+3.3V/5V dc power for the receiver section  
+3.3V/5V dc power for the transmitter section  
See recommended circuit schematic  
RxVcc  
TxVcc  
TD-  
TD+  
See recommended circuit schematic  
TxGND  
Directly connect this pin to the transmitter ground plane  
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486  
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213  
LUMINENTOIC.COM  
LUMNDS857-Jun0306  
Rev A.1  
3
622 Mbps DFB Laser Single Mode Transceiver(LH)  
C-1X-622(C)-TDFB(3)-SST(FC)4  
Recommended Circuit Schematic  
C-1X-622-TDFB(3)-SST(FC)4  
C-1X-622C-TDFB(3)-SST(FC)4  
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.  
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.  
A GND plane under the module is required for good EMI and sensitivity performance.  
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486  
LUMINENTOIC.COM  
LUMNDS857-Jun0306  
Rev A.1  
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213  
4
622 Mbps DFB Laser Single Mode Transceiver(LH)  
C-1X-622(C)-TDFB(3)-SST(FC)4  
Package Diagram [C-1X-622-TDFB(3)-SST4]  
Top View  
Front View  
Units: mm  
Rear View  
Front View  
Side View  
Package Diagram (9.8 mm SC transceiver assembly)  
Package Diagram [C-1X-622-TDFB(3)-SFC4]  
Top View  
Units: mm  
Rear View  
Side View  
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486  
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213  
LUMINENTOIC.COM  
LUMNDS857-Jun0306  
Rev A.1  
5
622 Mbps DFB Laser Single Mode Transceiver(LH)  
C-1X-622(C)-TDFB(3)-SST(FC)4  
Ordering Information  
Available Options:  
C-13-622(C)-TDFB-SST4  
C-13-622(C)-TDFB3-SST4  
C-15-622(C)-TDFB-SST4  
C-15-622(C)-TDFB3-SST4  
C-13-622(C)-TDFB-SFC4  
C-13-622(C)-TDFB3-SFC4  
C-15-622(C)-TDFB-SFC4  
C-15-622(C)-TDFB3-SFC4  
C-13-622(C)-TDFB-SST4-G5  
C-13-622(C)-TDFB3-SST4-G5 C-13-622(C)-TDFB3-SFC4-G5  
C-15-622(C)-TDFB-SST4-G5 C-15-622(C)-TDFB-SFC4-G5  
C-15-622(C)-TDFB3-SST4-G5 C-15-622(C)-TDFB3-SFC4-G5  
C-13-622(C)-TDFB-SFC4-G5  
Part unmbering Definition:  
C - 1X - 622(C) - TDFB(3) - S XX TxPower -RoHS  
• Wavelength  
13 = Wavelength 1310nm  
15 = Wavelength 1550nm  
• Communication protocol  
(622 Mbps)  
622 = PECL/VLPECL signal detection output  
622C = TTL/LVTTL signal detection output  
• TDFB= +5V DFB Transceiver  
TDFB3= +3.3V DFB Transceiver  
• Single mode fiber  
• Connector options  
ST/FC  
• Tx Power range  
4 = -3 to +2 dBm  
• Ordering Information  
Blank = RoHS non-compliant product  
G5 = RoHS 5/6-compliant product (lead exemption)  
GR = Full RoHS compliant product (no exemption)  
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486  
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213  
LUMINENTOIC.COM  
LUMNDS857-Jun0306  
Rev A.1  
6
622 Mbps DFB Laser Single Mode Transceiver(LH)  
C-1X-622(C)-TDFB(3)-SST(FC)4  
Warnings:  
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow  
guidelines according to proper ESD procedures.  
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.  
Legal Notes:  
IMPORTANT NOTICE!  
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance  
of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are  
given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warran-  
ties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of  
Sale for further warranty information.  
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual  
property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes  
no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this docu-  
ment are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers  
using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from  
such use or sale.  
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any  
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact  
LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.  
© LuminentOIC, Inc. 2003  
All rights reserved  
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486  
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213  
LUMINENTOIC.COM  
LUMNDS857-Jun0306  
Rev A.1  
7

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY