M200E622.080-067L [SPECTRUM]
Logic Circuit, MDIP24, DOUBLE WIDTH, METAL, DIP-24;型号: | M200E622.080-067L |
厂家: | SPECTRUM MICROWAVE, INC. |
描述: | Logic Circuit, MDIP24, DOUBLE WIDTH, METAL, DIP-24 |
文件: | 总4页 (文件大小:95K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Micro Networks
M200/210 Series
An Integrated Circuit Systems Company
Performance Specifications
M200/210 Series
Frequency Multipliers
DESCRIPTION
The M200/210 Series is a family of Phase-Locked
Frequency Multipliers that range in output
frequencies from 200MHz to 650MHz. These low-
skew, low-noise devices accept either single-ended
or differential inputs and are ideally suited to
applications where an environmentally remote or
stabilized reference is available as a low frequency
source for multiplication.
The M200/210 Frequency Multiplier Series was
developed specifically to meet tough performance
requirements found in today’s high-end RISC-
based Computers, Telecom Transmission, Base
Station, ATE, and Datacom applications.
FEATURES
200MHz to 650MHz Output Frequency
Low 3ps (rms) Typical Phase Jitter
Low 1.5nsec Skew (Fout to Fref)
Maximum
Packaged in small, 24-pin double-wide metal DIP
packages, the M200/210 Series devices are
available with either ECL or PECL differential
outputs and operate from a single supply (+5V for
PECL and -5V for ECL).
10% Frequency Lock Range
Multiplication Factors from 2 to 255
Single Ended and Differential Input
Models
Standard models are specified for 0°C to +70°C
operation. Extended temperature range models are
available for -25°C to +85°C operation (L models)
and for -55°C to +125°C operation (M models).
ECL/PECL Differential Outputs
Single Supply Operation
Extended Temperature Range Models
Available
APPLICATIONS
High-end RISC-based Computers
Telecom Transmission
Base Station
ATE
Datacom
ISO 9001
Registered
Micro Networks
324 Clark Street
Worcester, MA 01606
tel: 508-852-5400
fax: 508-852-8456
www.micronetworks.com
Micro Networks
M200/210 Series
An Integrated Circuit Systems Company
Performance Specifications
SPECIFICATIONS
Specifications @ TA = +25°C, -VEE = -5V for “E”, +VCC = +5V for “P”, unless otherwise indicated.
PARAMETER
Min
200
1
Typ
Max
650
80
Units
MHz
Output Frequency Range
Input Frequency Range
Multiplication Factor
Frequency Lock Range
Input Impedence (Note 4)
Input Voltage Levels: M200E
M200P
MHz
2
255
1
10
%
450
500
550
Ω
ECL, Single Ended
PECL, Single Ended
ECL, Differntial
PECL, Differential
M210E
M210P
Output Configuration (Note 1):
M200/210E
Differential ECL
Differential PECL
M200/210P
Skew (Fout to Fref)
Rise/Fall Time (20% to 80%)
Output Voltage Levels:
M200/210E
1.5
nsec
psec
575
ECL compatible
PECL compatible
M200/210P
Output Drive (Note 1)
Output Symmetry (Note 3)
Output Phase Jitter (Note 2)
Start Up Time
50
55/45
5
mA
%
45/55
50/55
3
psec (rms)
msec
40
Power Supply Requirements:
M200/210E (-Vee )
M200/210P (+Vcc )
Power Supply Current:
M200/210E (-Vee )
M200/210P (+Vcc )
-4.35
-5.00
-5.25
Volts
Volts
+4.35
+5.00
+5.25
-350
mA
mA
+350
Notes: 1. The output is measured with 250Ω termination resistor connected to VEE
.
2. The output jitter is measured with a maximum input jitter of 20psec p-p.
3. Symmetry is measured at VBB = -1.35V for M200/210E models and VBB = +VCC -1.35V for M200/210P models.
4. The M210 model’s input does not contain pulldown resistors thereby providing a high impedance to the differential input source.
The termination resistors should be located as close to the input pins as possible. The differential input voltage should not exceed 1.0V.
ORDERING INFORMATION
ABSOLUTE MAX RATINGS
Part Number
M200P622.080-032K
Operating Temp. Range (Case) ....................... -55°C to +125°C
Specified Temp. Range
Select M200 for single-ended input or
M210 for differential input configuration:
Select device output format:
Specify “E” for ECL or “P” for PECL
Specify frequency in MHz xxx.xxxx:
Specify multiplication factor:
002 through 255
Add suffix:
M2X0X-XXX.XX-XXXK............................0°C to +70°C
M2X0X-XXX.XX-XXXL ........................ -25°C to +85°C
M2X0X-XXX.XX-XXXM ..................... -55°C to +125°C
Storage Temp. Range (Ambient) ..................... -55°C to +125°C
Supply M102/210E ............................................... -7.0 to 0Volts
Supply M102/210P .............................................. 0 to +7.0Volts
Output Current .......................................................... 50mA Max
“K” for 0°C to +70°C operation
“L” for -25°C to +85°C operation
“M” for -55°C to +125°C operation
Micro Networks
324 Clark Street
Worcester, MA 01606
tel: 508-852-5400
fax: 508-852-8456
www.micronetworks.com
Micro Networks
M200/210 Series
An Integrated Circuit Systems Company
Performance Specifications
PIN CONFIGURATIONS
M200E Model
M200P Model
1. Ground
2. Fin
24. Ground
23. Ground
22. Ground
21. Ground
20. -5 Volts
19. NC
1. Ground
24. Ground
23. Ground
22. Ground
21. Ground
20. Ground
19. NC
2. Fin
3. Ground
4. -5 Volts
5. Ground
6. -5 Volts
7. Ground
8. -5 Volts
9. Ground
3. Ground
4. Ground
5. +5 Volts
6. Ground
7. +5 Volts
8. Ground
9. +5 Volts
1
24
18. -5 Volts
17. Ground
16. -5 Volts
18. Ground
17. +5 Volts
16. Ground
TOP
10. Osc. Out Q 15. Test Point
11. Osc. Out Q 14. -5 Volts
10. Osc. Out Q 15. Test Point
11. Osc. Out Q 14. Ground
VIEW
12. Ground
13. Ground
12. +5 Volts
13. +5 Volts
M210E Model
M210P Model
12
13
1. Ground
24. -5 Volts
23. Ground
22. Ground
21. Ground
20. -5 Volts
19. NC
1. +5 Volts
24. Ground
23. Ground
22. Ground
21. Ground
20. Ground
19. NC
2. Fin
2. Fin
3. Fin
3. Fin
4. -5 Volts
5. Ground
6. -5 Volts
7. Ground
8. -5 Volts
9. Ground
4. Ground
5. +5 Volts
6. Ground
7. +5 Volts
8. Ground
9. +5 Volts
18. -5 Volts
17. Ground
16. -5 Volts
18. Ground
17. +5 Volts
16. Ground
10. Osc. Out Q 15. Test Point
11. Osc. Out Q 14. -5 Volts
10. Osc. Out Q 15. Test Point
11. Osc. Out Q 14. Ground
12. Ground
13. Ground
12. +5 Volts
13. +5 Volts
PACKAGE OUTLINES
Micro Networks
324 Clark Street
Worcester, MA 01606
tel: 508-852-5400
fax: 508-852-8456
www.micronetworks.com
Micro Networks
M200/210 Series
An Integrated Circuit Systems Company
Performance Specifications
APPLICATION CIRCUITS
Micro Networks makes no assertion or warranty that the circuitry and the uses thereof disclosed herein are
non-infringing on any valid US or foreign patents. Micro Networks assumes no liability as a result of the use
of said specifications and reserves the right to make changes to specifications without notice. Contact
your nearest Micro Networks sales representative office for the latest specifications.
Micro Networks
An Integrated Circuit Systems Company
324 Clark Street Worcester, MA 01606 tel: 508-852-5400 fax: 508-852-8456
European Sales Headquarters Hertogsingel 20 6214 AD Maastricht The Netherlands tel: +31-43-32-70912 fax: +31-43-32-70715
www.micronetworks.com
Rev. 4.0
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明