TD3282 [SSOUSA]

Random Phase Switching;
TD3282
型号: TD3282
厂家: SOLID STATE OPTRONIC    SOLID STATE OPTRONIC
描述:

Random Phase Switching

文件: 总9页 (文件大小:396K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TD3281  
Random Phase Switching  
800V  
Triac Driver  
Description  
Features  
Random Phase Switching  
800V Blocking Voltage  
The TD3281 consists of a single input AlGaAs LED  
optically coupled to a Random Phase triac driver chip. The  
TD3281 provides high input-to-output isolation and is  
Trigger Current (15mA MAX)  
High Isolation Voltage (5000VRMS  
High dV/dt (1kV/S MIN)  
designed to drive high-powered triacs.  
Typical uses  
include interfacing logic level control signals to equipment  
powered from 240VAC lines and higher.  
)
Long Life / High Reliability  
The TD3281 comes standard in a miniature 6 pin DIP  
package making it ideal for high-density board applications.  
RoHS / Pb-Free / REACH Compliant  
Agency Approvals  
UL/C-UL:  
VDE:  
File # E201932  
File # 40035191 (EN 60747-5-2)  
Applications  
Home Appliances  
Motor / Drive Controls  
Solid State Relays  
Absolute Maximum Ratings  
The values indicated are absolute stress ratings. Functional  
operation of the device is not implied at these or any  
conditions in excess of those defined in electrical  
characteristics section of this document. Exposure to  
absolute Maximum Ratings may cause permanent damage  
to the device and may adversely affect reliability.  
Solenoid / Valve Controls  
Temperature Controls  
Dimmer Controls  
Schematic Diagram  
Storage Temperature …………………………..-55 to +125°C  
Operating Temperature …….………...………-40 to +100°C  
Continuous Input Current……………………………..50mA  
Transient Input Current……………….……………..400mA  
Reverse Input Control Voltage …………..…………………5V  
Input Power Dissipation…………………………………40mW  
Output Power Dissipation…………………………..330mW  
Solder Temperature – Wave (10sec)……………….….260°C  
Solder Temperature – IR Reflow (10sec)….…………..260°C  
(+) Input  
(-) Input  
1
2
3
6
5
4
+/- Load  
Do Not Connect  
(Triac Substrate)  
Ordering Information  
Random  
Phase  
Circuit  
Part Number  
Description  
TD3281  
6 pin DIP, (60/Tube)  
Do Not Connect  
-/+ Load  
TD3281-H  
TD3281-S  
TD3281-STR  
0.40” (10.16mm) Lead Spacing (VDE0884)  
6 pin SMD, (60/Tube)  
6 pin SMD, Tape and Reel (1000/Reel)  
TD3281  
NOTE: Suffixes listed above are not included in marking on  
device for part number identification  
Page 1 of 9  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
Electrical Characteristics, TA = 25°C (unless otherwise specified)  
Parameter  
Symbol  
Min.  
Typ.  
Max.  
Units  
Test Conditions  
Input Specifications  
LED Forward Voltage  
LED Reverse Voltage  
Reverse Leakage Current  
Trigger Current1  
VF  
BVR  
IInRleak  
IInOn  
-
5
-
1.4  
1.8  
-
V
V
IF = 10mA  
-
-
-
IR = 10μA  
10  
15  
VR = 5μA  
A  
mA  
-
Main Terminal Voltage = 3V  
Output Specifications  
Blocking Voltage  
VDRM  
IDRM1  
IO  
800  
-
10  
-
100  
100  
3
V
nA  
IO = 1A  
Peak Blocking Current  
Continuous Load Current  
On-State Voltage  
-
VDRM = 800  
-
-
mA  
V  
IF = 15mA  
VON  
-
2
IF = 15mA, ITM = 100mA  
Leakage Current  
IDRM2  
IHOLD  
dV/dt  
-
-
0.2  
250  
1,500  
1
IF=0mA, VDRM = 800V  
A  
Holding Current  
Critical Rate of Rise2  
-
-
-
A  
V/S  
1,000  
-
Isolation Specifications  
Isolation Voltage  
VISO  
RI-O  
5,000  
-
-
-
-
VRMS  
RH 50%, t=1min  
Input-Output Resistance  
1012  
VI-O = 500VDC  
  
Note 1:  
Note 2:  
Resistive load. For inductive loads, higher drive current is recommended  
This is for static dV/dt. Test Circuit Below  
TD3281 Static dV/dt Test Circuit:  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 2 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
TD3281 Performance & Characteristics Plots, TA = 25°C (unless otherwise specified)  
Figure 3: On-State Characteristics  
Figure 4: Leakage Current (IoLEAK) vs. Temperature (°C)  
Figure 5: Turn On Current (IF) vs. Temperature (°C)  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 3 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
TD3281 Solder Temperature Profile Recommendations  
(1) Infrared Reflow:  
Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow.  
Soldering process should not exceed temperature or time limits expressed herein. Surface temperature of device  
package should not exceed 250ºC:  
G
F
D
E
H
B
A
C
Figure 1  
Process  
Step  
Description  
Parameter  
A
B
C
D
E
F
Preheat Start Temperature (ºC)  
Preheat Finish Temperature (ºC)  
Preheat Time (s)  
150ºC  
180ºC  
90 - 120s  
230ºC  
30s  
260ºC  
10s  
<6ºC/s  
Melting Temperature (ºC)  
Time above Melting Temperature (s)  
Peak Temperature, at Terminal (ºC)  
Dwell Time at Peak Temperature (s)  
Cool-down (ºC/s)  
G
H
(2) Wave Solder:  
Maximum Temperature:  
Maximum Time:  
260ºC (at terminal)  
10s  
Pre-heating:  
100 - 150ºC (30 - 90s)  
Single Occurrence  
(3) Hand Solder:  
Maximum Temperature:  
Maximum Time:  
350ºC (at tip of soldering iron)  
3s  
Single Occurrence  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 4 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
TD3281 Package Dimensions  
6 PIN DIP Package  
Note: All dimensions in millimeters with inches [“] in parenthesis ()  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 5 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
TD3281 Package Dimensions  
6 PIN WIDE Lead Space Package (-H)  
Note: All dimensions in millimeters [mm] with inches in parenthesis ()  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 6 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
TD3281 Package Dimensions  
6 PIN SMD Surface Mount Package (-S)  
Note: All dimensions in millimeters with inches [“] in parenthesis ()  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 7 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
TD3281 Package Dimensions  
6 PIN SMD Tape & Reel (-STR)  
Note: All dimensions in millimeters  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 8 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  
TD3281  
Random Phase Switching  
800V  
Triac Driver  
TD3281 Package Marking  
TD3281  
YYWW  
Date Code  
Pin 1  
TD3281 Package Weights  
Full Tube  
(60pcs)  
Full Pouch  
(10 tubes)  
Full Reel  
(1000pcs)  
Device  
Single Unit  
TD3281  
0.41  
43  
42  
44  
-
450  
-
TD3281-S  
TD3281-H  
TD3281-STR  
0.40  
0.42  
0.40  
440  
460  
-
-
880  
Note: All weights above are in GRAMS, and include  
packaging materials where applicable  
DISCLAIMER  
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO  
reserves the right to make changes to product description, specifications at any time without further notices.  
SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent  
licenses nor indemnity are expressed or implied.  
Except as specified in SSO’s Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other  
warranty, expressed or implied, including merchantability and fitness for particular use.  
LIFE SUPPORT POLICY  
SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or  
death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all  
damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the  
body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be  
reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or system whose failure can be  
reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness.  
© 2013 Solid State Optronics San José, CA  
www.ssousa.com +1.408.293.4600  
Page 9 of 9  
TD3281 /H/S/TR  
Rev 2.00 (11/12/2013)  
001698  

相关型号:

TD330M10

SOLID TANTALUM
NTE

TD330M16

SOLID TANTALUM
NTE

TD330M20

SOLID TANTALUM
NTE

TD330M25

SOLID TANTALUM
NTE

TD330M35

SOLID TANTALUM
NTE

TD330M50

SOLID TANTALUM
NTE

TD330M6.3

SOLID TANTALUM
NTE

TD330N

Silicon Controlled Rectifier, 520A I(T)RMS, 1400V V(DRM), 1400V V(RRM), 1 Element, MODULE-5
INFINEON

TD330N12KOC

Silicon Controlled Rectifier, 520A I(T)RMS, 330000mA I(T), 1200V V(DRM), 1200V V(RRM), 1 Element, MODULE-5
INFINEON

TD330N12KOF

Silicon Controlled Rectifier, 520A I(T)RMS, 1200V V(DRM), 1200V V(RRM), 1 Element, MODULE-5
INFINEON

TD330N14KOC

Silicon Controlled Rectifier, 520A I(T)RMS, 330000mA I(T), 1400V V(DRM), 1400V V(RRM), 1 Element, MODULE-5
INFINEON

TD330N16KOF

Silicon Controlled Rectifier, 520A I(T)RMS, 1600V V(DRM), 1600V V(RRM), 1 Element, MODULE-5
INFINEON