CX6CSM1-32.0M,100/100/-/M [STATEK]

QUARTZ CRYSTAL RESONATOR, 32 MHz, HERMETIC SEALED, MINIATURE, LEADLESS, CERAMIC PACKAGE-2;


型号：	CX6CSM1-32.0M,100/100/-/M
厂家：	STATEK CORPORATION
描述：	QUARTZ CRYSTAL RESONATOR, 32 MHz, HERMETIC SEALED, MINIATURE, LEADLESS, CERAMIC PACKAGE-2
文件：	总2页 (文件大小：155K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CX6SM AT CRYSTAL

9.6 MHz to 250 MHz

Ultra-Low Profile Miniature

Surface Mount AT Quartz Crystal

DESCRIPTION

STATEK’s miniature CX6SM AT crystals in leadless ceramic

packages are designed for surface mounting on printed circuit

boards or hybrid substrates. These crystals have a small land

pattern and a low profile. They are manufactured using the

STATEK-developed photolithographic process, and were

designed utilizing the experience acquired by producing millions

of crystals for industrial, commercial, military and medical

applications.

actual size

side view

glass lid

ceramic lid

PACKAGE DIMENSIONS

FEATURES

Ultra low profile (less than 1 mm available) hermetically

sealed ceramic package

TOP

BOTTOM

Designed for surface mount applications using infrared,

vapor phase, or epoxy mount techniques.

Excellent aging characteristics

Available with glass or ceramic lid

High shock and vibration resistance

Custom designs available

Full military testing available

TYPICAL

MAXIMUM

Designed and manufactured in the USA

DIM

inches

0.265

0.103

inches

7.11

2.90

6.73

2.62

0.280

0.114

APPLICATIONS

Medical

see below

0.050

1.27

0.060

1.52

Monitoring Equipment

Industrial, Computer & Communications

Down-hole Data Recorder

Environmental Controls

Handheld Inventory Control

Telemetry

THICKNESS (DIM C) MAXIMUM

GLASS LID

CERAMIC LID

inches

0.99

1.04

1.12

inches

0.053

0.055

0.058

1.35

1.40

1.47

SM1

0.039

0.041

0.044

Military & Aerospace

Communications

SM2/SM4

SM3/SM5

Smart Munitions

Timing Devices (Fuzes)

Surveillance Devices

10117 - Rev C

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

TERMINATIONS

SPECIFICATIONS

Specifications are typical at 25^OC unless otherwise noted.

Specifications are subject to change without notice.

Designation

SM1

Termination

Gold Plated

SM2

SM3

SM4

SM5

Solder Plated

Solder Dipped

Solder Plated (Lead Free)

Solder Dipped (Lead Free)

Fundamental Frequency

Motional Resistance R₁(

10 MHz 32 MHz 155.52 MHz

Ω)

2.8

6.2

4.0

Motional Capacitance C₁(fF)

Quality Factor Q (k)

Max Process Temperature 260^OC for 20 sec.

Shunt Capacitance C₀(pF)

1.4

2.3

Calibration Tolerance¹

Load Capacitance²

⁺^_100 ppm, or tighter as required

20 pF for f ≤ 50 MHz

SUGGESTED LAND PATTERN

0.070 (1.78)

10 pF for f > 50 MHz

Drive Level

500

200

W MAX for f ≤ 50 MHz

µW MAX for f > 50 MHz

⁺^_50 ppm to ⁺^_10 ppm (Commercial)

⁺^_100 ppm to ⁺^_20 ppm (Industrial)

⁺^_100 ppm to ⁺^_30 ppm (Military)

0.120 (3.05)

Frequency-Temperature

Stability^1,3

Aging, first year³

Shock, survival⁴

Vibration, survival⁵

5 ppm MAX (below 1 ppm available)

3,000 g, 0.3 ms, 1/2 sine

0.215 (5.46)

inches (mm)

20 g, 10-2,000 Hz swept sine

EQUIVALENT CIRCUIT

Operating Temp. Range

-10^OC to +70^OC (Commercial)

-40^OC to +85^OC (Industrial)

-55^OC to +125^OC (Military)

C₀

Storage Temp. Range

Max Process Temperature 260^OC for 20 sec.

-55^OC to +125^OC

L₁

C₁

R₁

1. Other tolerances available. Contact factory.

2. Unless specified otherwise.

R₁Motional Resistance L₁Motional Inductance

C₁Motional Capacitance C₀Shunt Capacitance

3. Does not include calibration tolerance. The characteristics of the frequency stability over

temperature follow that of the AT thickness-shear mode.

4. 10 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher

frequencies contact factory.

5. Higher shock version available.

PACKAGING

6. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.

• Tray Pack

• Tape and Reel

Per EIA 481 (see Tape and Reel data sheet 10109)

HOW TO ORDER CX6SM AT CRYSTALS

CX6

SM1

–

32.0M

100

—

Operating Temp. Range:

C = Ceramic Lid

Blank = Glass Lid

Frequency

M = MHz

Calibration

Tolerance

@ 25^OC

Frequency

Stability over

Temp. Range

(in ppm)

“S” if special or

custom design.

Blank if Std.

= -10^OC to +70^OC

I = -40^OC to +85^OC

M = -55^OC to +125^OC

(in ppm)

SM1 = Gold Plated

SM2 = Solder Plated

SM3 = Solder Dipped

SM4 = Solder Plated (Lead Free)

SM5 = Solder Dipped (Lead Free)

= Customer Specified

—

200

Operating Temp. Range:

Total

Frequency

Tolerance

(in ppm)

= -10^OC to +70^OC

= -40^OC to +85^OC

M = -55^OC to +125^OC

= Customer Specified

10117 - Rev C

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

相关型号：