CXOQHG3N-400.0K,30/100/-/I [STATEK]
CMOS/TTL Output Clock Oscillator, 0.4MHz Nom,;![CXOQHG3N-400.0K,30/100/-/I](http://pdffile.icpdf.com/pdf2/p00230/img/icpdf/CXOQHG3N-100_1350833_icpdf.jpg)
型号: | CXOQHG3N-400.0K,30/100/-/I |
厂家: | ![]() |
描述: | CMOS/TTL Output Clock Oscillator, 0.4MHz Nom, 机械 振荡器 |
文件: | 总2页 (文件大小:1491K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CXOQ/CXOQHG OSCILLATOR
400 kHz to 100 MHz
One of the World’s Smallest and Highest Precision
Crystal Oscillators
DESCRIPTION
Technological advancements permit 2.5 mm x 2.0 mm
CXOQ quartz oscillator to have design-in capabilities of
withstanding high shock applications. Additionally, the ultra-
miniature CXOQ takes advantage of Statek’s well known
reliability and impeccable quality.
FEATURES
DIMENSIONS
High shock survival
High frequency stability
A
C
D
Low acceleration sensitivity (HG version)
CMOS and TTL compatible
4
1
3
2
4
3
2
E
Low power consumption
TOP
BOTTOM
B
Full military testing per MIL PRF 55310 available
Optional output enable/disable with Tri-State
Low EMI emission
1
Hermetically sealed ceramic package
Designed, manufactured and tested in the USA
TYPICAL
inches mm
MAXIMUM
DIM
A
inches
0.102
mm
2.60
2.10
0.098
0.079
0.035
2.50
2.00
B
0.083
APPLICATIONS
C (SM1)
0.89
1.02
0.039
0.048
1.00
1.22
Military
C (SM3/SM5) 0.040
Medical
Industrial
D
E
0.026
0.022
0.67
0.57
0.027
0.023
0.69
0.59
SUGGESTED LAND PATTERN
PIN CONNECTIONS
1. Output Enable/Disable (E) or no connection (N)
0.114 (2.9)
2. Ground (Connected to Lid)
3. Output
4. VDD
0.094 (2.4)
0.025 (0.64)
0.038
(0.975)
0.037
(0.95)
inches (mm)
10190 Rev A1
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice. Tighter
specifications are available. Please contact factory.
Supply Voltage VDD
Storage Temperature
-0.5 V to 5.0 V
-55OC to 125OC
Maximum Process Temperature 260OC for 20 seconds
Frequency
Supply Voltage1
400 kHz to 100 MHz
1.8V to 5.0 V 10%
ENABLE/DISABLE OPTIONS (E/N)
Calibration Tolerance2
100 ppm to 30 ppm
Statek offers two enable/disable options: E and N. The
E-version has a Tri-State output and stops oscillating
internally when the output is put into the high Z state.
The N-version does not have PIN 1 connected internally
and so has no enable/disable capability. The following
table describes the Enable/Disable option E.
Frequency Stability
Over Temperature3
50 ppm for Commercial
100 ppm for Industrial
100 ppm for Military
Supply Current (Typical)
1.8 V
3.3 V
24 MHz
32 MHz
50 MHz
1.5 mA
2.0 mA
3.0 mA
3.0 mA
5.0 mA
6.0 mA
ENABLE/DISABLE OPTION E
FUNCTION TABLE
Output Load (CMOS)
Start-up Time
15 pF
Enable (Pin 1 High*) Disable (Pin 1 Low)
5 ms MAX
Output
Frequency Output
Oscillates
High Z State
Stops
Rise/Fall Time
Duty Cycle4
10 ns MAX
Oscillator
Current
45% MIN/55% MAX
5 ppm
5,000 g, 0.3 ms, 1/2 sine
HG: 20,000 g
Aging, first year
Shock, survival5
Normal
Very Low
* When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.
Vibration, survival6
20 g, 10-2,000 Hz swept sine
PACKAGING OPTIONS
Operating Temp. Ranges
-10OC to 70OC
-40OC to 85OC
-55OC to 125OC
(Commerical)
(Industrial)
(Military)
CXOQ
- Tray Pack
- 12 mm tape, 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet
#10109)
1. Contact factory for available other voltages.
2. Tighter tolerances available.
3. Does not include calibration tolerances. Tighter tolerances available
4. Tighter duty cycles are available.
5. Higher shock available, contact factory for requirements above 20,000 g.
6. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also
available.
Note: All parameters are measured at ambient temperature with a 10 M1, 15 pF load.
HOW TO ORDER CXOQ/CXOQHG SURFACE MOUNT CRYSTAL OSCILLATORS
CXOQ
HG
4
S
N
SM3
32.0M
,
100
/
100
/
/
I
“S” if Special or Enable/Disable Terminations
custom design;
otherwise blank
Frequency Calibration
K = kHz
M = MHz
HG = High Supply Voltage
Shock
otherwise
leave blank 3 = 3.0 V
4 = 3.3 V
Frequency
Stability over
Temp. Range
(in ppm)
Temp. Range:
Option
E or N
Blank = SM1
= Gold Plated
(Lead Free)
SM3 = Solder Dipped
SM5 = Solder Dipped
(Lead Free)
Tolerance
@ 250C
(in ppm)
1 = 1.8 V
2 = 2.5 V
C
= -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S
= Customer Specified
5 = 5.0 V*
OR
*5.0 V offered in Disable (N) option only.
/
/
200
Total
Frequency
Tolerance
(in ppm)
/
I
Temp. Range:
C
= -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S
= Customer Specified
10190 Rev A1
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
相关型号:
©2020 ICPDF网 联系我们和版权申明