CXOQHG3N-400.0K,30/100/-/M [STATEK]

CMOS/TTL Output Clock Oscillator, 0.4MHz Nom,;


型号：	CXOQHG3N-400.0K,30/100/-/M
厂家：	STATEK CORPORATION
描述：	CMOS/TTL Output Clock Oscillator, 0.4MHz Nom, 机械振荡器
文件：	总2页 (文件大小：1491K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CXOQ/CXOQHG OSCILLATOR

400 kHz to 100 MHz

One of the World’s Smallest and Highest Precision

Crystal Oscillators

DESCRIPTION

Technological advancements permit 2.5 mm x 2.0 mm

CXOQ quartz oscillator to have design-in capabilities of

withstanding high shock applications. Additionally, the ultra-

miniature CXOQ takes advantage of Statek’s well known

reliability and impeccable quality.

FEATURES

DIMENSIONS

High shock survival

High frequency stability

Low acceleration sensitivity (HG version)

CMOS and TTL compatible

Low power consumption

TOP

BOTTOM

Full military testing per MIL PRF 55310 available

Optional output enable/disable with Tri-State

Low EMI emission

Hermetically sealed ceramic package

Designed, manufactured and tested in the USA

TYPICAL

inches mm

MAXIMUM

DIM

inches

0.102

2.60

2.10

0.098

0.079

0.035

2.50

2.00

0.083

APPLICATIONS

C (SM1)

0.89

1.02

0.039

0.048

1.00

1.22

Military

C (SM3/SM5) 0.040

Medical

Industrial

0.026

0.022

0.67

0.57

0.027

0.023

0.69

0.59

SUGGESTED LAND PATTERN

PIN CONNECTIONS

1. Output Enable/Disable (E) or no connection (N)

0.114 (2.9)

2. Ground (Connected to Lid)

3. Output

4. V_DD

0.094 (2.4)

0.025 (0.64)

0.038

(0.975)

0.037

(0.95)

inches (mm)

10190 Rev A1

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

SPECIFICATIONS

ABSOLUTE MAXIMUM RATINGS

Specifications are typical at 25^OC unless otherwise noted.

Specifications are subject to change without notice. Tighter

specifications are available. Please contact factory.

Supply Voltage V_DD

Storage Temperature

-0.5 V to 5.0 V

-55^OC to 125^OC

Maximum Process Temperature 260^OC for 20 seconds

Frequency

Supply Voltage¹

400 kHz to 100 MHz

1.8V to 5.0 V 10%

ENABLE/DISABLE OPTIONS (E/N)

Calibration Tolerance²

100 ppm to 30 ppm

Statek offers two enable/disable options: E and N. The

E-version has a Tri-State output and stops oscillating

internally when the output is put into the high Z state.

The N-version does not have PIN 1 connected internally

and so has no enable/disable capability. The following

table describes the Enable/Disable option E.

Frequency Stability

Over Temperature³

50 ppm for Commercial

100 ppm for Industrial

100 ppm for Military

Supply Current (Typical)

1.8 V

3.3 V

24 MHz

32 MHz

50 MHz

1.5 mA

2.0 mA

3.0 mA

5.0 mA

6.0 mA

ENABLE/DISABLE OPTION E

FUNCTION TABLE

Output Load (CMOS)

Start-up Time

15 pF

Enable (Pin 1 High*) Disable (Pin 1 Low)

5 ms MAX

Output

Frequency Output

Oscillates

High Z State

Stops

Rise/Fall Time

Duty Cycle⁴

10 ns MAX

Oscillator

Current

45% MIN/55% MAX

5 ppm

5,000 g, 0.3 ms, ¹/₂sine

HG: 20,000 g

Aging, first year

Shock, survival⁵

Normal

Very Low

* When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.

Vibration, survival⁶

20 g, 10-2,000 Hz swept sine

PACKAGING OPTIONS

Operating Temp. Ranges

-10^OC to 70^OC

-40^OC to 85^OC

-55^OC to 125^OC

(Commerical)

(Industrial)

(Military)

CXOQ

- Tray Pack

- 12 mm tape, 7” or 13” reels

Per EIA 481 (see Tape and Reel data sheet

#10109)

1. Contact factory for available other voltages.

2. Tighter tolerances available.

3. Does not include calibration tolerances. Tighter tolerances available

4. Tighter duty cycles are available.

5. Higher shock available, contact factory for requirements above 20,000 g.

6. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also

available.

Note: All parameters are measured at ambient temperature with a 10 M1, 15 pF load.

HOW TO ORDER CXOQ/CXOQHG SURFACE MOUNT CRYSTAL OSCILLATORS

CXOQ

SM3

32.0M

100

“S” if Special or Enable/Disable Terminations

custom design;

otherwise blank

Frequency Calibration

K = kHz

M = MHz

HG = High Supply Voltage

Shock

otherwise

leave blank 3 = 3.0 V

4 = 3.3 V

Frequency

Stability over

Temp. Range

(in ppm)

Temp. Range:

Option

E or N

Blank = SM1

= Gold Plated

(Lead Free)

SM3 = Solder Dipped

SM5 = Solder Dipped

(Lead Free)

Tolerance

@ 25⁰C

(in ppm)

1 = 1.8 V

2 = 2.5 V

= -10^OC to +70^OC

I = -40^OC to +85^OC

M = -55^OC to +125^OC

= Customer Specified

5 = 5.0 V*

*5.0 V offered in Disable (N) option only.

200

Total

Frequency

Tolerance

(in ppm)

Temp. Range:

= -10^OC to +70^OC

I = -40^OC to +85^OC

M = -55^OC to +125^OC

= Customer Specified

10190 Rev A1

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

相关型号：