首页 |元器件品牌

LXOAT2NSM3-120.0M,H1BA [STATEK]

CMOS Output Clock Oscillator, 120MHz Nom;
LXOAT2NSM3-120.0M,H1BA
型号： LXOAT2NSM3-120.0M,H1BA
厂家： STATEK CORPORATION    STATEK CORPORATION
描述：

CMOS Output Clock Oscillator, 120MHz Nom

机械 石英晶振 振荡器
文件： 总8页 (文件大小：469K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
MILITARY PRODUCTS  
HIGH FREQUENCY OSCILLATORS WITH  
STANDARD MILITARY TESTING  
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com  
OVERVIEW  
For over 35 years, Statek has supported military programs with both standard products (normally purchased without a drawing and  
without modifications or special testing) and specialized products (normally purchased to a drawing and requiring modifications or  
special testing). For those desiring standard products (not governed by a source control document) but still desiring construction  
and testing to military standards, Statek offers a portfolio of oscillators manufactured and tested to MIL-PRF-55310, Product  
Level B. Because of our dedication to servicing specialized needs and continued support of the military market over the years,  
Statek is a preferred supplier to a number of major defense contractors.  
GUIDELINES FOR MILITARY PRODUCTS  
Materials  
Statek uses only the highest quality materials from carefully selected suppliers. Whenever possible, we use domestic suppliers  
and try to cultivate a long-term relationship to provide stable sources of high-quality materials. Statek’s incoming inspection  
assures compliance to our requirements. We manufacture our crystals with ultra-pure synthetically grown alpha-quartz bars.  
(Swept quartz is also available, e.g., for applications requiring radiation hardness.) To simplify and minimize the device circuitry,  
we use oscillator-dedicated integrated circuits. Lastly, we design our own ceramic packages, which are then manufactured for us  
by our package supplier.  
Assembly  
Statek optimizes its manufacturing process to guarantee high quality. Our time-proven assembly process includes many  
proprietary techniques to ensure robust parts suitable for the harshest environments. All military oscillators are inspected to  
MIL-STD-883 prior to seal.  
Testing  
In order to meet COTS (commercial-off-the-shelf) requirements, Statek offers oscillators meeting the testing requirements of  
MIL-PRF-55310 Product Level B. However, Statek gladly accepts fully customized testing to meet your needs; just contact us  
with your requirements.  
Continuity  
Statek offers the continuity of support required for long-term military programs. We maintain records so that we can trace each  
delivery back through its manufacturing history. Statek also has production redundancy and an established Business Continuity  
Plan, which will allow us to recover in the event of an unforeseen occurrence.  
Quality Assurance  
Statek uses the ISO 9001:2000 process approach model and plans its continual improvements in order to achieve total customer  
satisfaction.  
IN-HOUSE TEST CAPABILITIES FOR OSCILLATORS: (INCLUDE BUT NOT LIMITED TO)  
Aging (Elevated Temp) . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-PRF-55310, Paragraph 4.8.35)  
Burn-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-PRF-55310, Table III)  
Die Shear Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2019)  
Fine/Gross Leak Testing . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 1014; MIL-STD-202, Method 112)  
Lead Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2004)  
Mechanical Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2002)  
Moisture Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-202, Method 106)  
PIND (Particle Impact Noise Detection) . . . . . . . . . . . . . . .(MIL-STD-883, Method 2020; MIL-STD-202, Method 217)  
Salt Atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 1009)  
Solderability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2003)  
Temperature Cycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 1010)  
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-PRF-55310, Paragraph 1.2.1.3, Table III)  
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-202, Method 107)  
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-202, Method 204)  
Wirebond Pull Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2023)  
PRODUCT FAMILY DESCRIPTIONS  
Statek’s high-frequency military grade oscillators are designed specifically to meet the demanding  
requirements of today’s precision military applications.  
The CXO oscillator is compatible with  
conventional soldering, epoxy attachment and  
wirebonding. It has high shock resistance and  
excellent long-term reliability.  
The HGXO is a miniature surface mount  
oscillator that can survive extremely high shocks  
up to 100,000 g. In addition, due to its design  
and construction, it is available in tighter  
frequency calibrations than Statek’s other  
oscillators.  
The CXOX oscillator is a miniaturized version  
of the CXOM, with a low profile ceramic  
package and one of the smallest footprints  
available in the industry.  
The LXOAT and LXOMAT are thru-hole  
oscillators.  
The CXOHG, CXOMHG and CXOXHG  
oscillators are high-shock versions of the CXO,  
CXOM and CXOX oscillators that can survive  
shocks up to 10,000 g (and higher if required.)  
For applications requiring other types of  
crystals, oscillators, or sensors, please contact  
the factory.  
MILITARY PROGRAM  
PARTICIPATION  
MILITARY APPLICATIONS  
AMRAAM (Advanced Medium-Range Air to Air Missile)  
ASRAAM (Advance Short-Range Air to Air Missile)  
CSEL (Combat Survivor Evader Locator)  
DAS (Distributed Aperture System)  
ERGM (Extended Range Guided Munitions)  
EXCALIBER (Next Generation Fuze)  
JASSM (Joint Air to Surface Standoff Missile)  
JCM (Joint Common Missile)  
Smart Munitions  
Airborne Communication Systems  
Battlefield Simulation  
Portable Field Equipment  
Projectile Electronics  
Robust Computing Platform  
Telemetry  
JTRS (Joint Tactical Radio System)  
JSF (Joint Strike Fighter)  
Navigation  
GPS  
LGB (Laser Guided Bomb)  
MRM (Medium Range Munition)  
PAC-3 (Patriot Advanced Capabilities)  
PREDATOR (Hand-Held Missile)  
SFW (Sensor Fuzed Weapons)  
WCMD (Wind Corrected Munitions Dispenser)  
MAXIMUM RATINGS  
Supply Voltage VDD  
Storage Temperature  
-0.5 V to 7.0 V  
-55OC to +125OC  
ENABLE/DISABLE OPTIONS (E/T/N)  
Statek offers three enable/disable options: E, T, and N. Both the E-version and T-version have Tri-State outputs and  
differ in whether the oscillator continues to run internally when the output is put into the high Z state: it stops in the  
E-version and continues to run in the T-version. So, the E-version offers very low current consumption when the oscillator  
is disabled and the T-version offers very fast output recovery when the oscillator is re-enabled. The N-version does not  
have PIN 1 connected internally and so has no enable/disable capability. The following table summarizes the three  
options.  
SUMMARY OF ENABLE/DISABLE OPTIONS E/T/N  
E
T
N
When enabled (PIN 1 is high*)  
Output  
Freq. output  
Oscillates  
Normal  
Freq.output  
Oscillates  
Normal  
Freq. output  
Oscillates  
Normal  
Oscillator  
Current consumption  
When disabled (PIN 1 is low)  
Output  
High Z state  
Stops  
High Z state  
Oscillates  
Freq. output  
Oscillates  
Normal  
Oscillator  
Current consumption  
Very low  
Lower than normal  
When re-enabled (PIN 1 changes from low to high)  
Output recovery Delayed  
Immediate  
N/A  
* When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.  
3
2
2
3
0.275 (6.99)  
E
DIMENSIONS  
TYP.  
MAX.  
DIM  
A
inches  
0.400  
0.180  
0.051  
0.340  
0.125  
0.050  
mm  
10.16  
4.57  
1.30  
8.64  
3.18  
1.27  
inches  
0.405  
0.190  
0.055  
0.350  
0.135  
0.060  
mm  
10.29  
4.83  
1.40  
8.89  
3.43  
1.52  
TOP  
A
D
BOTTOM  
0.130 (3.30)  
0.070 (1.78)  
0.060 (1.52)  
CXO/  
CXOHG  
B
C*  
D
4
1
1
F
4
B
C
E
F
PIN CONNECTIONS  
0.140 (3.56)  
0.135 (3.43)  
GRID  
PLACEMENT  
COURTYARD  
* SM1 Termination  
1. Enable/Disable (E or T) or not connected (N)  
2. Ground  
3. Output  
4. VDD  
G
DIMENSIONS  
0.060 (1.52)  
0.040 (1.02)  
TYP.  
MAX.  
D
D
2
1
3
4
DIM  
A
inches  
0.295  
0.197  
0.089  
0.055  
0.040  
0.240  
0.100  
mm  
inches  
0.302  
0.204  
0.098  
mm  
0.075 (1.91)  
0.165 (4.19)  
7.50  
5.00  
2.25  
1.40  
1.02  
6.10  
2.54  
7.68  
5.18  
2.50  
A
F
TOP  
B
C*  
D
0.240 (6.10)  
HGXO  
B
C
E
E
F
PIN CONNECTIONS  
G
1. Enable/Disable (E or T) or not connected (N)  
GRID  
PLACEMENT  
COURTYARD  
* SM1 Termination  
0.100 (2.54)  
2. Ground  
3. Output  
4. VDD  
inches (mm)  
SPECIFICATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice.  
SURFACE MOUNT PRODUCTS  
CXO/CXOHG  
CXOM/CXOMHG  
CXOX/CXOXHG  
0
3
M
G
3
0
M
9
1
.
4
M
0
6
T
Frequency Range  
300 kHz to 120 MHz (up to 220 MHz for 3.3V) 300 kHz to 120 MHz (up to 220 MHz for 3.3V) 1 MHz to 160 MHz  
Supply Voltage  
1.8 V to 5.0 V  
1.8 V to 5.0 V  
1.8 V to 5.0 V  
+
+
+
+
+
+
Standard Calibration Tolerances1  
+_ 25 ppm, _ 50 ppm, _ 100 ppm  
+_ 25 ppm, _ 50 ppm, _ 100 ppm  
+_ 25 ppm, _ 50 ppm, _ 100 ppm  
+
+
+
+
Frequency Stability Over Temp. Range 2 _ 25 ppm to _ 100 ppm  
+_ 25 ppm to _ 100 ppm  
+_ 25 ppm to _ 100 ppm  
5.0 V  
3.3 V  
5.0 V  
3.3 V  
5.0 V  
3.3 V  
Supply Current (Typical)  
13 mA for 50 MHz  
12 mA for 40 MHz  
10 mA for 32 MHz  
8 mA for 24 MHz  
6 mA for 50 MHz  
5.5 mA for 40 MHz  
5 mA for 32 MHz  
3 mA for 24 MHz  
14 mA for 50 MHz  
12 mA for 40 MHz  
10 mA for 30 MHz  
8 mA for 24 MHz  
10 mA for 50 MHz  
8 mA for 40 MHz  
6 mA for 30 MHz  
4 mA for 24 MHz  
13 mA for 50 MHz  
12 mA for 40 MHz  
10 mA for 32 MHz  
8 mA for 24 MHz  
6 mA for 50 MHz  
5.5 mA for 40 MHz  
5 mA for 320 MHz  
3 mA for 24 MHz  
Output Load (CMOS) 3  
Start-up Time  
15 pF  
15 pF  
15 pF  
5 ms MAX  
5 ms MAX  
5 ms MAX  
Rise/Fall Time  
3 ns TYP, 6 ns MAX  
40% MIN, 60% MAX  
3 ns TYP, 6 ns MAX  
40% MIN, 60% MAX  
3 ns TYP, 6 ns MAX  
40% MIN, 60% MAX  
Duty Cycle1  
Aging, first year  
For high frequency oscillators, aging is dependent on frequency and  
Shock, survival 4  
3,000 g / 10,000 g, 0.3 ms, / sine  
20 g, 10-2000 Hz swept sine  
260OC for 20 seconds  
3,000 g / 10,000 g, 0.3 ms, / sine  
20 g, 10-2000 Hz swept sine  
260OC for 20 seconds  
5,000 g / 10,000 g, 0.3 ms, / sine  
20 g, 10-2000 Hz swept sine  
260OC for 20 seconds  
1
2
1
1
2
2
Vibration, survival5  
Maximum Process Temperature  
1. Other tolerances available  
2. Does not include calibration tolerance. Other tolerances available.  
3. TTL loads and higher CMOS loads available. Contact Factory.  
4. Higher shock version available.  
5. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.  
NOTE: All combinations may not be available. All parameters are measured at an ambient temperature with a 10 M  
Ω, 15 pF load.  
DIMENSIONS  
0.070 (1.78)  
0.065 (1.65)  
0.067 (1.70)  
D
TYP.  
MAX.  
2
3
DIM  
A
inches  
0.256  
0.197  
0.051  
0.055  
0.060  
mm  
inches  
0.263  
0.204  
0.055  
mm  
A
TOP  
BOTTOM  
6.50  
5.00  
1.30  
1.40  
1.52  
6.68  
5.18  
1.40  
1
4
B
CXOM/  
D
C*  
D
CXOMHG  
0.201 (5.11)  
0.136 (3.45)  
B
C
E
E
0.070  
1.78  
* SM1 Termination  
PIN CONNECTIONS  
1. Enable/Disable (E or T) or not connected (N)  
2. Ground  
3. Output  
4. VDD  
GRID  
PLACEMENT  
COURTYARD  
0.137 (3.48)  
G
DIMENSIONS  
F
E
DIM  
A
inches  
mm  
20.57 MAX  
H
I
J
0.810 MAX  
0.510 MAX  
0.300 0.005  
0.600 0.005  
0.430 TYP  
B
C
D
E
12.95 MAX  
7.62 0.13  
15.24 0.13  
10.92 TYP  
6.10 MAX  
1.02 TYP  
A
PIN  
NO.7  
PIN  
NO.1  
D
LXOAT  
C
B
F
0.240 MAX  
0.040 TYP  
PIN  
NO.8  
PIN  
NO.14  
G
H
I
0.150 MIN  
3.81 MIN  
PIN CONNECTIONS  
0.018 0.002  
0.070 TYP  
0.46 0.05  
1.78 TYP  
1. Enable/Disable (E or T) or not connected (N)  
J
7. Ground  
8. Output  
14. VDD  
THRU-HOLE PRODUCTS  
HGXO  
LXOAT  
LXOMAT  
z
H
M
0
.
k
2
0
3
7
-
-
T
2
0
X
L
460 kHz to 50 MHz  
250 kHz to 120 MHz (up to 220 MHz for 3.3V) 250 kHz to 120 MHz (up to 220 MHz for 3.3V)  
1.8 V to 5.0 V  
1.8 V to 5.0 V  
1.8 V to 5.0 V  
+
+
+
+
+
+
+_ 25 ppm, _ 50 ppm, _ 100 ppm  
+_ 25 ppm, _ 50 ppm, _ 100 ppm  
+_ 25 ppm, _ 50 ppm, _ 100 ppm  
+
+
+
+_ 25 ppm to _ 100 ppm  
+_ 25 ppm to _ 100 ppm  
+_ 25 ppm to _ 100 ppm  
5.0 V  
3.3 V  
5.0 V  
3.3 V  
5.0 V  
3.3 V  
14 mA for 50 MHz  
12 mA for 40 MHz  
10 mA for 30 MHz  
8 mA for 24 MHz  
10 mA for 50 MHz  
8 mA for 40 MHz  
6 mA for 30 MHz  
4 mA for 24 MHz  
14 mA for 50 MHz  
12 mA for 40 MHz  
10 mA for 30 MHz  
8 mA for 24 MHz  
10 mA for 50 MHz  
8 mA for 40 MHz  
6 mA for 30 MHz  
4 mA for 24 MHz  
14 mA for 50 MHz  
12 mA for 40 MHz  
10 mA for 30 MHz  
8 mA for 24 MHz  
10 mA for 50 MHz  
8 mA for 40 MHz  
6 mA for 30 MHz  
4 mA for 24 MHz  
15 pF  
15 pF  
15 pF  
5 ms MAX  
5 ms MAX  
5 ms MAX  
8 ns MAX  
6 ns TYP, 10 ns MAX  
40% MIN, 60% MAX  
6 ns TYP, 10 ns MAX  
40% MIN, 60% MAX  
40% MIN, 60% MAX  
d other design considerations. Please contact factory.  
1
2
1
1
2
2
Up to 100,000 g, 0.5 ms, / sine  
20 g, 10-2000 Hz swept sine  
260OC for 20 seconds  
1,000 g peak, 1 ms, / sine  
20 g, 10-2000 Hz swept sine  
175OC for 20 seconds  
1,000 g peak, 1 ms, / sine  
20 g, 10-2000 Hz swept sine  
175OC for 20 seconds  
DIMENSIONS  
0.141 (3.6)  
A
C
D
TYP.  
MAX.  
DIM  
inches  
0.126  
0.099  
0.039  
mm  
3.20  
2.50  
1.00  
1.12  
1.00  
0.75  
inches  
0.136  
0.107  
0.043  
0.048  
0.041  
0.031  
mm  
3.40  
2.70  
1.09  
1.21  
1.10  
0.85  
4
1
3
2
4
3
2
E
A
B
TOP  
BOTTOM  
B
CXOX/  
0.110 (2.9)  
0.031 (0.8)  
C (SM1)  
1
CXOXHG  
C (SM3/SM5) 0.044  
0.039 (1.05)  
D
E
0.040  
0.030  
PIN CONNECTIONS  
1. Output Enable/Disable (E) or no connection (N)  
0.051  
(1.3)  
0.039  
(1.0)  
2. Ground  
3. Output  
4. VDD  
inches (mm)  
E
D
C
F
DIMENSIONS  
H
G
DIM  
A
inches  
mm  
PIN  
NO.1  
PIN  
NO.4  
0.505 MAX  
0.300 0.005  
0.430 TYP  
0.225 MAX  
0.025 MAX  
0.150 MIN  
0.018 0.002  
0.063 TYP  
12.83 MAX  
7.62 0.13  
10.92 TYP  
5.72 MAX  
0.64 MAX  
3.81 MIN  
B
C
B
A
LXOMAT  
D
E
PIN  
NO.8  
PIN  
NO.5  
F
G
0.46 0.05  
1.60 TYP  
PIN CONNECTIONS  
H
1. Enable/Disable (E or T) or not connected (N)  
4. Ground  
5. Output  
8. VDD  
PRODUCT LEVEL B TEST OPTIONS  
MIL-STD  
883 & 202  
Methods  
Sample Size  
Test Options  
Standard Testing includes: Internal Visual, Stabilization Bake, Seal Test,  
B0  
Electrical and Function Test  
883 Method  
Internal Visual (Pre-Seal)  
2017 & 2032  
1008, Cond C  
1010, Cond B  
100%  
Stabilization Bake (150OC)  
Temperature Cycling  
100%  
100%  
100%  
100%  
2001, Cond A  
Constant Acceleration  
(5000g, Y1 Axis only)  
B1  
1014, Cond A1& C  
Seal Test (Fine and Gross Leak)  
Electrical and Function Test  
Burn-in, operating (MIL-PRF-55310, Table III)  
Final Electrical Test  
---  
---  
---  
100%  
BA  
100%  
100%  
BB  
202 Method  
As specified in  
MIL-PRF-55310  
Electrical Tests  
Visual & Mechanical  
Solderability  
---  
---  
As specified in  
MIL-PRF-55310  
BC  
As specified in  
MIL-PRF-55310  
208  
As specified in  
MIL-PRF-55310  
Group B  
30-day Age (MIL-PRF-55310, Para.4.7.1.5)  
---  
Vibration  
204, Cond D  
213, Cond I  
107, Cond B  
8 units  
4 units  
Shock  
Thermal Shock  
Ambient Pressure (MIL-PRF-55310, Para.4.8.46)  
Storage Temperature (MIL-PRF-55310, Para.4.8.47)  
---  
---  
Resistance to Soldering Heat  
210, Cond B  
2 units  
2 units  
Moisture Resistance  
106  
---  
Salt Atmosphere (MIL-STD-883 Method 1009, Cond A)  
Terminal Strength (as applicable)  
Resistance to Solvents  
211, Cond C  
215  
• The paragraph numbers listed in this table refer to MIL-PRF-55310, Revision D  
• Please contact factory for a description of the standard “Electrical and Functional” battery of tests and the Statek internal visual test  
• Sampling is performed as per MIL-PRF-55310 Table VI at this time  
• Please contact factory for additional tests, including MIL-PRF-55310 Level S tests  
HOW TO ORDER  
CXOM  
5
S
T
SM3  
–
32.0M  
,
A
1
BA  
Enable/Disable Option SM3 = Solder Dipped  
Frequency  
K = kHz  
M = MHz  
Frequency/Temp Stability Codes  
Test Options  
“S” if special  
or custom  
design.  
Accuracy @ 250C  
A = 100 ppm  
H = 50 ppm  
F = 25 ppm  
(Contact factory for  
other tolerances.)  
CXO  
CXOHG  
CXOM  
CXOMHG  
CXOX  
CXOXHG  
HGXO  
Supply Voltage  
1 = 1.8V  
2 = 2.5V  
3 = 3.0V  
4 = 3.3V  
1 = 100 ppm over -40OC to +85OC B0 = Standard Testing Only  
E, T, or N  
Blank otherwise  
2 = 50 ppm over -40OC to +85OC  
3 = 25 ppm over -40OC to +85OC  
B1 = Screening (MIL-PRF-55310)  
BA = Screening + Group A  
HGXO  
only  
E and T are not  
available in all  
frequencies; contact  
factory with specific  
requirements.  
Blank if Std.  
4 = 100 ppm over -55OC to +125OC BB = Screening + Groups A & B  
5 = 50 ppm over -55OC to +125OC BC = Screening + Groups A, B, & C  
5 = 5.0V  
Shock Level  
A = 5,000 g  
LXOAT  
LXOMAT  
B = 10,000 g  
C = 20,000 g  
D = 30,000 g  
F = 50,000 g  
G = 75,000 g  
H = 100,000 g  
512 N. Main Street  
Orange, California  
1449 Orange Grove  
Orange, California  
All products made in the USA.  
10175 Rev C 08/08  
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明