STB75NF75T4 [STMICROELECTRONICS]
N-channel 75V - 0.0095ヘ - 80A - TO-220 - TO-220FP - D2PAK STripFET⑩ II Power MOSFET; N沟道75V - 0.0095ヘ - 80A - TO- 220 - TO- 220FP - D2PAK STripFET⑩ II功率MOSFET
| 型号： | STB75NF75T4 |
| 厂家： | 
ST |
| 描述： | N-channel 75V - 0.0095ヘ - 80A - TO-220 - TO-220FP - D2PAK STripFET⑩ II Power MOSFET |
| 文件： | 总16页 (文件大小：423K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STB75NF75
STP75NF75 - STP75NF75FP
N-channel 75V - 0.0095Ω - 80A - TO-220 - TO-220FP - D2PAK
STripFET™ II Power MOSFET
General features
Type
VDSS
RDS(on)
ID
STB75NF75
STP75NF75
75V
75V
75V
<0.011Ω 80A(1)
<0.011Ω 80A(1)
<0.011Ω 80A(1)
3
3
2
2
1
1
STP75NF75FP
TO-220
TO-220FP
1. Current limited by package
■ Exceptional dv/dt capability
■ 100% avalanche tested
3
1
D²PAK
Description
This Power MOSFET series realized with
STMicroelectronics unique STripFET™ process
has specifically been designed to minimize input
capacitance and gate charge. It is therefore
suitable as primary switch in advanced high-
efficiency, high-frequency isolated DC-DC
converters for Telecom and Computer
Internal schematic diagram
applications. It is also intended for any
applications with low gate drive requirements.
Applications
■ Switching application
Order codes
Part number
Marking
Package
Packaging
STB75NF75T4
STP75NF75
B75NF75
P75NF75
P75NF75
D²PAK
TO-220
Tape & reel
Tube
STP75NF75FP
TO-220FP
Tube
February 2007
Rev 8
1/16
www.st.com
16
Contents
STB75NF75 - STP75NF75 - STP75NF75FP
Contents
1
2
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
4
5
6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
STB75NF75 - STP75NF75 - STP75NF75FP
Electrical ratings
1
Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Value
D2PAK /TO-220
Parameter
Unit
TO-220FP
VDS
Drain-source voltage (VGS = 0)
75
75
V
V
V
VDGR Drain-gate voltage (RGS = 20KΩ)
VGS
Gate-source voltage
20
(1)
ID
Drain current (continuous) at TC = 25°C
Drain current (continuous) at TC=100°C
80
70
80
70
A
A
(1)
ID
(2)
IDM
Drain current (pulsed)
320
300
2.0
A
W
320
45
PTOT Total dissipation at TC = 25°C
Derating factor
0.3
W/°C
V/ns
mJ
dv/dt (3) Peak diode recovery voltage slope
12
(4)
EAS
Single pulse avalanche energy
700
Insulation withstand voltage (RMS) from all
three leads to external heat sink (t=1s;TC=25°C)
VISO
--
2000
V
TJ
Operating junction temperature
Storage temperature
-55 to 175
°C
Tstg
1. Current limited by package
2. Pulse width limited by safe operating area
3. ISD ≤80A, di/dt ≤300A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX
4. Starting TJ = 25 oC, ID = 40A, VDD = 37.5V
Table 2.
Symbol
Thermal data
Value
Parameter
Unit
D2PAK /TO-220
TO-220FP
RthJC
RthJA
Thermal resistance junction-case max
Thermal resistance junction-ambient max
0.5
3.33
°C/W
°C/W
62.5
Maximum lead temperature for soldering
purpose(1)
Tl
300
°C
1. 1.6mm from case for 10sec)
3/16
Electrical characteristics
STB75NF75 - STP75NF75 - STP75NF75FP
2
Electrical characteristics
(T
=25°C unless otherwise specified)
CASE
Table 3.
Symbol
On/off states
Parameter
Test conditions
Min.
Typ.
Max. Unit
Drain-source breakdown
voltage
V(BR)DSS
ID = 250µA, VGS= 0
75
V
V
DS = Max rating,
1
µA
µA
Zero gate voltage drain
current (VGS = 0)
IDSS
VDS = Max rating @125°C
10
Gate body leakage current
(VDS = 0)
IGSS
VGS = 20V
100
4
nA
VGS(th)
RDS(on)
VDS= VGS, ID = 250µA
VGS= 10V, ID= 40A
Gate threshold voltage
2
3
V
Static drain-source on
resistance
0.0095 0.011
Ω
Table 4.
Symbol
Dynamic
Parameter
Test conditions
Min.
Typ.
Max. Unit
(1)
VDS = 15V, ID = 40A
Forward transconductance
20
S
gfs
Ciss
Coss
Crss
Input capacitance
3700
730
pF
pF
pF
VDS =25V, f = 1 MHz,
VGS = 0
Output capacitance
Reverse transfer
capacitance
240
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
117
27
nC
nC
nC
160
VDD = 60V, ID = 80A
VGS =10V
47
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
4/16
STB75NF75 - STP75NF75 - STP75NF75FP
Electrical characteristics
Min. Typ. Max. Unit
Table 5.
Symbol
Switching times
Parameter
Test conditions
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
25
100
66
ns
ns
ns
ns
VDD= 37.5V, ID= 45A,
RG=4.7Ω, VGS=10V
Figure 15 on page 9
Turn-off delay time
Fall time
30
Table 6.
Symbol
Source drain diode
Parameter
Test conditions
Min Typ. Max Unit
ISD
Source-drain current
80
320
1.5
A
A
V
(1)
Source-drain current (pulsed)
Forward on voltage
ISDM
(2)
ISD = 80A, VGS = 0
ISD = 80A,
VSD
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
132
660
10
ns
nC
A
di/dt = 100A/µs,
Qrr
VDD = 25V, TJ = 150°C
IRRM
Figure 17 on page 9
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
5/16
Electrical characteristics
STB75NF75 - STP75NF75 - STP75NF75FP
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for TO-220 -
D²PAK
Figure 2. Thermal impedancefor TO-220 -
D²PAK
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
Figure 5. Output characterisics
Figure 6. Transfer characteristics
6/16
STB75NF75 - STP75NF75 - STP75NF75FP
Figure 7. Transconductance
Electrical characteristics
Figure 8. Static drain-source on resistance
Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage Figure 12. Normalized on resistance vs
vs temperature temperature
7/16
Electrical characteristics
STB75NF75 - STP75NF75 - STP75NF75FP
Figure 13. Source-drain diode forward
characteristics
Figure 14. Normalized B
vs temperature
VDSS
8/16
STB75NF75 - STP75NF75 - STP75NF75FP
Test circuit
3
Test circuit
Figure 15. Switching times test circuit for
resistive load
Figure 16. Gate charge test circuit
Figure 17. Test circuit for inductive load
switching and diode recovery times
Figure 18. Unclamped inductive load test
circuit
Figure 19. Unclamped inductive waveform
9/16
Package mechanical data
STB75NF75 - STP75NF75 - STP75NF75FP
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/16
STB75NF75 - STP75NF75 - STP75NF75FP
Package mechanical data
TO-220 MECHANICAL DATA
mm.
TYP
inch
DIM.
MIN.
4.40
0.61
1.15
0.49
15.25
10
MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
MIN.
0.173
0.024
0.045
0.019
0.60
TYP.
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
A
b
b1
c
D
E
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
e
2.40
4.95
1.23
6.20
2.40
13
e1
F
H1
J1
L
L1
L20
L30
øP
Q
3.50
3.93
16.40
28.90
0.645
1.137
3.75
2.65
3.85
2.95
0.147
0.104
0.151
0.116
11/16
Package mechanical data
STB75NF75 - STP75NF75 - STP75NF75FP
D2PAK MECHANICAL DATA
mm.
inch
TYP.
DIM.
MIN.
4.4
TYP
MAX.
4.6
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
A
A1
A2
B
2.49
0.03
0.7
2.69
0.23
0.93
1.7
B2
C
1.14
0.45
1.23
8.95
0.6
C2
D
1.36
9.35
D1
E
8
0.315
0.334
10
10.4
0.393
E1
G
8.5
4.88
15
5.28
15.85
1.4
0.192
0.590
0.050
0.055
0.094
0.208
0.625
0.055
0.068
0.126
L
L2
L3
M
1.27
1.4
1.75
3.2
2.4
R
0.4
0.015
V2
0º
4º
1
12/16
STB75NF75 - STP75NF75 - STP75NF75FP
Package mechanical data
TO-220FP MECHANICAL DATA
mm.
inch
TYP.
DIM.
MIN.
4.4
TYP
MAX.
4.6
2.7
2.75
0.7
1
MIN.
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
MAX.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
A
B
2.5
D
2.5
E
0.45
0.75
1.15
1.15
4.95
2.4
F
F1
F2
G
1.7
1.7
5.2
2.7
10.4
G1
H
10
L2
L3
L4
L5
L6
L7
Ø
16
0.630
28.6
9.8
2.9
15.9
9
30.6
10.6
3.6
1.126
.0385
0.114
0.626
0.354
0.118
1.204
0.417
0.141
0.645
0.366
0.126
16.4
9.3
3
3.2
L3
L6
L7
1
2 3
L5
L2
L4
13/16
Packaging mechanical data
STB75NF75 - STP75NF75 - STP75NF75FP
5
Packaging mechanical data
2
D PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
24.4
100
0.059
13.2 0.504 0.520
0795
26.4 0.960 1.039
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
TAPE MECHANICAL DATA
1000
mm
inch
DIM.
MIN. MAX. MIN. MAX.
10.5 10.7 0.413 0.421
15.7 15.9 0.618 0.626
A0
B0
D
1.5
1.6 0.059 0.063
D1
E
1.59 1.61 0.062 0.063
1.65 1.85 0.065 0.073
F
11.4
4.8
3.9
11.9
1.9
50
11.6 0.449 0.456
5.0 0.189 0.197
4.1 0.153 0.161
12.1 0.468 0.476
2.1 0.075 0.082
1.574
K0
P0
P1
P2
R
T
0.25 0.35 0.0098 0.0137
23.7 24.3 0.933 0.956
W
* on sales type
14/16
STB75NF75 - STP75NF75 - STP75NF75FP
Revision history
6
Revision history
Table 7.
Date
Revision history
Revision
Changes
03-Aug-2006
15-Sep-2006
27-Feb-2007
6
7
8
Complete version
RDS(on) value update
The document has been reformatted
15/16
STB75NF75 - STP75NF75 - STP75NF75FP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16
相关型号：
STB76NF80
80A, 80V, 0.011ohm, N-CHANNEL, Si, POWER, MOSFET, TO-263AB, ROHS COMPLIANT, TO-263, D2PAK-3
STMICROELECTR
STB7720
2400MHz - 2500MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER, 3 X 3 MM, LEAD FREE, LEADLESS, QFN-16
STMICROELECTR
STB7N52K3
N-channel 525 V, 0.84 Ω, 6.3 A, D2PAK, DPAK, TO-220FP, TO-220 SuperMESH3™ Power MOSFET
STMICROELECTR
STB7N52K3_09
N-channel 525 V, 0.84 OHM, 6.2 A, D2PAK, DPAK, TO-220FP, TO-220 SuperMESH3 Power MOSFET
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明