STEVAL-ISA011V1 [STMICROELECTRONICS]
VIPER12ADIP-E low power AC/DC adapter demonstration board (suitable for the STEVAL-ILL002V1); VIPER12ADIP -E低功率AC / DC适配器演示板(适用于STEVAL- ILL002V1 )型号: | STEVAL-ISA011V1 |
厂家: | ST |
描述: | VIPER12ADIP-E low power AC/DC adapter demonstration board (suitable for the STEVAL-ILL002V1) |
文件: | 总4页 (文件大小:95K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STEVAL-ISA011V1
VIPER12ADIP-E low power AC/DC adapter demonstration board
(suitable for the STEVAL-ILL002V1)
Data brief
Features
■ Minimum AC input voltage = 88 Vrms
■ Maximum AC input voltage = 265 Vrms
■ Max output power = 4.1 W
■ Output voltage = 4.5 V
■ Max output current = 900 mA
■ Efficiency (at full load and 230 Vac) = 70 %
■ Efficiency (at full load and 115 Vac) = 70 %
Description
The STEVAL-ISA011V1 demonstration board is a
low power (4.1 W output), general purpose
adapter. The design is based on the
STEVAL-ISA011V1
VIPER12ADIP-E monolithic device which, in the
same package, integrates the high voltage power
switch and the basic control function needed for a
current mode flyback converter.
The board can handle a wide range AC input
voltage, from 88 Vac to 265 Vac, with one output
voltage of 4.5 V delivering a maximum output
current of 900 mA.
The main applications for this board are auxiliary
power supplies and wall-plug adapters.
September 2010
Doc ID 18014 Rev 1
1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Schematic circuit
STEVAL-ISA011V1
1
Schematic circuit
Figure 1.
STEVAL-ISA011V evaluation board schematic
ꢅ
ꢂ
ꢂ
ꢅ
ꢂ
'
9 ' '
) %
6 ꢅ
6 ꢂ
ꢆ
ꢀ
ꢅ
ꢂ
ꢄ
' ꢅ
' ꢀ
' ꢆ
ꢋ
ꢊ
ꢌ
ꢂ
ꢀ
$,ꢂꢅꢅꢅꢄ
2/4
Doc ID 18014 Rev 1
STEVAL-ISA011V1
Revision history
2
Revision history
Table 1.
Date
23-Sep-2010
Document revision history
Revision
Changes
1
Initial release.
Doc ID 18014 Rev 1
3/4
STEVAL-ISA011V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Doc ID 18014 Rev 1
相关型号:
STEVAL-ISA019V3
80 W ESBT quasi-resonant wide-range SMPS demonstration board based on the L6565 for 3-phase applications
STMICROELECTR
STEVAL-ISA020V1
3.5 W battery charger demonstration board based on the VIPer12AS-E and TSM101
STMICROELECTR
STEVAL-ISA023V2
Flyback AC-DC converter evaluation board based on the VIPer53-E with 24 W negative output
STMICROELECTR
STEVAL-ISA024V1
20 A step-down DC-DC converter demonstration board with 3.3 Vout and 250 kHz switching frequency, based on the L6725
STMICROELECTR
STEVAL-ISA029V1
Compact power supply for DVD/set top box evaluation board with three Vout (-30 V, 3.3 V, 12 V)
STMICROELECTR
STEVAL-ISA032V1
60 W forward converter demonstration board for fiscal cash register based on the L5991 and STP10NK60Z
STMICROELECTR
STEVAL-ISA033V1
55 W flyback SMPS demonstration board for alarm system based on the L5991 and STP12NK80Z
STMICROELECTR
STEVAL-ISA036V1
5 W wide range SMPS demonstration board for metering and motor control based on the ESBT® STC04IE170HP
STMICROELECTR
STEVAL-ISA042V2
1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明