STVP [STMICROELECTRONICS]
ST Visual Programmer; ST可视化编程
ST 
STVP
ST Visual Programmer
Data brief
Features
■ Free software
■ Supports Motorola S19 and Intel HEX formats
■ Load, Edit and Save executable and/or data
files generated by the Assembler/Linker or C
compilers
■ Erase, Program, View and Verify device Flash
memory contents
■ Project mode to automate all configuration and
programming tasks
■ Programming Toolkit with C/C++ source files
for creating a programming application based
on ST Visual Programmer (STVP)
Description
■ STVP supports microcontroller programming
via a complete range of hardware development
tools and dedicated programmers, including:
ST Visual Programmer (STVP) is a full-featured
software interface for programming ST Flash
microcontrollers. It provides an easy-to-use and
efficient environment for reading, writing to and
verifying device memory and option bytes. STVP
is delivered as part of the free ST MCU Toolset,
which includes the ST Visual Develop (STVD)
integrated development environment and the ST
Assembler Linker.
– ST-LINK in-circuit debugger/programmer
for STM8 and STM32
– RLink in-circuit debugger/programmer for
STM8 and ST7
– STice advanced emulators for STM8
– ST7 Flash STICK in-circuit programmer
– ST7-EPB programming board
In addition, developers can take advantage of the
Free Programming Toolkit with C/C++ sources for
all the functions needed to develop a customized
programming interface based on STVP for any
supported ST programming hardware. It contains
source code for all the functions that allow a
programming application to access STVP’s low-
level DLLs and program microcontrollers using
any of the supported programming hardware and
programming method (socket, in-circuit
– ST7-DVP3 & DVP2 series emulators
– ST7-EMU3 series emulators
programming or in situ programming).
September 2010
Doc ID 17955 Rev 1
1/3
For further information contact your local STMicroelectronics sales office.
www.st.com
3
Ordering information
ST Visual Programmer (STVP)
Ordering information
The ST MCU Toolset with ST Visual Programmer, ST Visual Develop and Assembler Linker
tool chain is available for free download from ST. It is also provided on the software CD-
ROM provided with all supported hardware tools.
Revision history
Table 1.
Document revision history
Date
Revision
Changes
17-Sep-2010
1
Initial release.
2/3
Doc ID 17955 Rev 1
ST Visual Programmer (STVP)
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 17955 Rev 1
3/3
相关型号：
STVVGLNA
General-purpose, variable-gain, low-noise, RF amplifier for broadcast receiver applications
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明