STX25NM60ND [STMICROELECTRONICS]
N-channel 600 V, 0.13 Ω, 21 A FDmesh™ II Power MOSFET D2PAK, I2PAK, TO-220FP, TO-220, TO-247; N沟道600 V ， 0.13 Ω ，21是FDmesh ？二功率MOSFET D2PAK ， I2PAK ，TO- 220FP ，TO- 220，TO- 247
| 型号： | STX25NM60ND |
| 厂家： | 
ST |
| 描述： | N-channel 600 V, 0.13 Ω, 21 A FDmesh™ II Power MOSFET D2PAK, I2PAK, TO-220FP, TO-220, TO-247 |
| 文件： | 总18页 (文件大小：597K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STx25NM60ND
N-channel 600 V, 0.13 Ω, 21 A FDmesh™ II Power MOSFET
D2PAK, I2PAK, TO-220FP, TO-220, TO-247
Features
VDSS
TJMAX
@
Type
RDS(on) max
ID
3
3
1
3
2
2
1
1
STB25NM60ND
STI25NM60ND
STF25NM60ND
STP25NM60ND
STW25NM60ND
21 A
21 A
D2PAK
TO-220
TO-220FP
650 V
0.16 Ω
21 A(1)
21 A
21 A
1. Limited only by maximum temperature allowed
3
2
3
2
1
1
■ The worldwide best R
*area amongst the
I2PAK
TO-247
DS(on)
fast recovery diode devices
■ 100% avalanche tested
■ Low input capacitance and gate charge
■ Low gate input resistance
Figure 1.
Internal schematic diagram
■ Extremely high dv/dt and avalanche
capabilities
Application
■ Switching applications
Description
The FDmesh™ II series belongs to the second
generation of MDmesh™ technology. This
revolutionary Power MOSFET associates a new
vertical structure to the company's strip layout
and associates all advantages of reduced on-
resistance and fast switching with an intrinsic fast-
recovery body diode.It is therefore strongly
recommended for bridge topologies, in ZVS
phase-shift converters.
Table 1.
Device summary
Order codes
Marking
Package
Packaging
STB25NM60ND
STI25NM60ND
STF25NM60ND
STP25NM60ND
STW25NM60ND
25NM60ND
25NM60ND
25NM60ND
25NM60ND
25NM60ND
D²PAK
I²PAK
Tape and reel
Tube
TO-220FP
TO-220
TO-247
Tube
Tube
Tube
March 2009
Rev 4
1/18
www.st.com
18
Contents
STx25NM60ND
Contents
1
2
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
4
5
6
Test circuits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STx25NM60ND
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
TO-220, D2PAK
TO-220FP
I2PAK, TO-247
600
25
VDS
VGS
ID
Drain-source voltage (VGS = 0)
Gate-source voltage
V
V
Drain current (continuous) at TC = 25 °C
Drain current (continuous) at TC = 100 °C
Drain current (pulsed)
21
13
21(1)
13(1)
84(1)
40
A
A
ID
(2)
IDM
84
A
PTOT
Total dissipation at TC = 25 °C
Peak diode recovery voltage slope
160
W
dv/dt(3)
40
V/ns
Insulation withstand voltage (RMS) from
all three leads to external heat sink
Viso
2500
V
(t=1 s;TC=25 °C)
Tstg
TJ
Storage temperature
–55 to 150
150
°C
°C
Max. operating junction temperature
1. Limited only by maximum temperature allowed
2. Pulse width limited by safe operating area
3. ISD ≤ 21 A, di/dt ≤ 600 A/µs, VDD = 80% V(BR)DSS
Table 3.
Symbol
Thermal data
Parameter
TO-220
I²PAK
0.78
TO-247 D²PAK TO-220FP Unit
Thermal resistance
junction-case max
Rthj-case
Rthj-amb
Rthj-pcb
3.1
°C/W
°C/W
°C/W
Thermal resistance
junction-ambient max
62.5
50
62.5
Thermal resistance
junction-ambient max
30
Maximum lead
temperature for
soldering purpose
Tl
300
°C
Table 4.
Symbol
Avalanche characteristics
Parameter
Max value
Unit
Avalanche current, repetitive or not-repetitive
(pulse width limited by TJ max)
IAS
10
A
Single pulse avalanche energy
EAS
850
mJ
(starting TJ = 25 °C, ID = IAS, VDD = 50 V)
3/18
Electrical characteristics
STx25NM60ND
2
Electrical characteristics
(T
=25 °C unless otherwise specified)
CASE
Table 5.
Symbol
On/off states
Parameter
Value
Test conditions
Unit
Min. Typ. Max.
Drain-source
V(BR)DSS
ID = 1 mA, VGS = 0
600
V
breakdown voltage
V
DD= 480 V, ID= 21 A,
dv/dt(1) Drain source voltage slope
48
V/ns
VGS= 10 V
Zero gate voltage
IDSS
V
DS = Max rating
1
µA
µA
drain current (VGS = 0)
VDS = Max rating @125 °C
100
Gate-body leakage
IGSS
VGS
VDS = VGS, ID = 250 µA
GS = 10 V, ID = 10.5 A
=
20 V
100
nA
V
current (VDS = 0)
VGS(th) Gate threshold voltage
3
4
5
RDS(on) Static drain-source on
resistance
V
0.13
0.16
Ω
1. Characteristic value at turn off on inductive load
Table 6.
Symbol
Dynamic
Parameter
Test conditions
Min. Typ. Max.
Unit
(1)
gfs
Forward transconductance VDS = 15 V I = 10.5 A
17
S
, D
pF
pF
pF
Input capacitance
Ciss
Coss
Crss
2400
150
15
VDS = 50 V, f = 1 MHz,
VGS = 0
Output capacitance
Reverse transfer
capacitance
Equivalent output
capacitance
(2)
Coss eq.
VGS = 0, VDS = 0 to 480 V
320
pF
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
VDD = 300 V, ID = 10.5 A
G = 4.7 Ω VGS = 10 V
(see Figure 23),
(see Figure 18)
60
30
50
40
ns
ns
ns
ns
R
Turn-off delay time
Fall time
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 480 V, ID = 21 A,
VGS = 10 V,
80
15
40
nC
nC
nC
(see Figure 19)
f=1 MHz Gate DC Bias=0
Test signal level = 20 mV
Open drain
Rg
Gate input resistance
1.6
Ω
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80% VDSS
4/18
STx25NM60ND
Electrical characteristics
Min. Typ. Max. Unit
Table 7.
Source drain diode
Parameter
Symbol
Test conditions
ISD
Source-drain current
21
84
A
A
(1)
ISDM
Source-drain current (pulsed)
(2)
VSD
Forward on voltage
ISD = 21 A, VGS = 0
1.3
V
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
160
1
ns
µC
A
ISD = 21 A, VDD = 60 V
di/dt=100 A/µs
Qrr
(see Figure 20)
IRRM
15
ISD = 21 A,VDD = 60 V
di/dt=100 A/µs,
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
230
2
ns
µC
A
Qrr
TJ = 150 °C
IRRM
19
(see Figure 20)
1. Pulse width limited by safe operating area
2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%.
5/18
Electrical characteristics
STx25NM60ND
2.1
Electrical characteristics (curves)
Figure 2.
Safe operating area for TO-220,
D²PAK, I²PAK
Figure 3.
Figure 5.
Figure 7.
Thermal impedance for TO-220,
D²PAK, I²PAK
Figure 4.
Figure 6.
6/18
Safe operating area for TO-220FP
Thermal impedance for TO-220FP
Safe operating area for TO-247
Thermal impedance for TO-247
STx25NM60ND
Electrical characteristics
Figure 8.
Output characteristics
Figure 9.
Transfer characteristics
Figure 10. Transconductance
Figure 11. Static drain-source on resistance
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
7/18
Electrical characteristics
STx25NM60ND
Figure 14. Normalized gate threshold voltage Figure 15. Normalized on resistance vs
vs temperature
temperature
Figure 16. Source-drain diode forward
characteristics
Figure 17. Normalized B
vs temperature
VDSS
8/18
STx25NM60ND
Test circuits
3
Test circuits
Figure 18. Switching times test circuit for
resistive load
Figure 19. Gate charge test circuit
Figure 20. Test circuit for inductive load
switching and diode recovery times
Figure 21. Unclamped inductive load test
circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
9/18
Package mechanical data
STx25NM60ND
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.
10/18
STx25NM60ND
Package mechanical data
TO-220 mechanical data
mm
inch
Dim
Min
Typ
Max
Min
Typ
Max
A
b
4.40
0.61
1.14
0.48
15.25
4.60
0.88
1.70
0.70
15.75
0.173
0.024
0.044
0.019
0.6
0.181
0.034
0.066
0.027
0.62
b1
c
D
D1
E
1.27
0.050
10
10.40
2.70
5.15
1.32
6.60
2.72
14
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
e
2.40
4.95
1.23
6.20
2.40
13
e1
F
H1
J1
L
L1
L20
L30
∅P
Q
3.50
3.93
16.40
0.645
28.90
1.137
3.75
3.85
2.95
0.147
0.104
0.151
0.116
2.65
11/18
Package mechanical data
STx25NM60ND
TO-220FP mechanical data
mm
Dim.
Min.
Typ.
Max.
A
B
4.4
2.5
4.6
2.7
2.75
0.7
1
D
2.5
E
0.45
0.75
1.15
1.15
4.95
2.4
F
F1
F2
G
1.70
1.5
5.2
2.7
10.4
G1
H
10
L2
L3
L4
L5
L6
L7
Dia
16
28.6
9.8
2.9
15.9
9
30.6
10.6
3.6
16.4
9.3
3
3.2
L7
E
A
B
D
Dia
L5
L6
F2
F1
F
G
H
G1
L4
L2
L3
7012510_Rev_J
12/18
STx25NM60ND
Package mechanical data
TO-262 (I2PAK) mechanical data
mm.
Typ.
inch
Typ.
DIM.
Min.
4.40
2.40
0.61
1.14
0.49
1.23
8.95
2.40
4.95
10
Max.
4.60
2.72
0.88
1.70
0.70
1.32
9.35
2.70
5.15
10.40
14
Min.
0.173
0.094
0.024
0.044
0.019
0.048
0.352
0.094
0.194
0.393
0.511
0.137
0.050
Max.
0.181
0.107
0.034
0.066
0.027
0.052
0.368
0.106
0.202
0.410
0.551
0.154
0.055
A
A1
b
b1
c
c2
D
e
e1
E
L
13
L1
L2
3.50
1.27
3.93
1.40
13/18
Package mechanical data
STx25NM60ND
D²PAK (TO-263) mechanical data
mm
inch
Typ
Dim
Min
Typ
Max
Min
Max
A
A1
b
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
10
4.60
0.23
0.93
1.70
0.60
1.36
9.35
0.173
0.001
0.027
0.045
0.017
0.048
0.352
0.295
0.394
0.334
0.181
0.009
0.037
0.067
0.024
0.053
0.368
b2
c
c2
D
D1
E
10.40
0.409
E1
e
8.50
2.54
0.1
e1
H
4.88
15
5.28
15.85
2.69
2.79
1.40
1.75
0.192
0.590
0.099
0.090
0.05
0.208
0.624
0.106
0.110
0.055
0.069
J1
L
2.49
2.29
1.27
1.30
L1
L2
R
0.051
0.4
0.016
V2
0°
8°
0°
8°
0079457_M
14/18
STx25NM60ND
Package mechanical data
TO-247 Mechanical data
mm.
Typ
Dim.
Min.
Max.
A
A1
b
4.85
5.15
2.20
1.0
2.60
1.40
2.40
3.40
b1
b2
c
2.0
3.0
0.40
19.85
15.45
0.80
D
20.15
15.75
E
e
5.45
18.50
5.50
L
14.20
14.80
4.30
L1
L2
øP
øR
S
3.70
3.55
3.65
4.50
5.50
15/18
Packing mechanical data
STx25NM60ND
5
Packing mechanical data
2
D PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
24.4
100
0.059
13.2 0.504 0.520
0795
26.4 0.960 1.039
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
TAPE MECHANICAL DATA
1000
mm
inch
DIM.
MIN. MAX. MIN. MAX.
10.5 10.7 0.413 0.421
15.7 15.9 0.618 0.626
A0
B0
D
1.5
1.6 0.059 0.063
D1
E
1.59 1.61 0.062 0.063
1.65 1.85 0.065 0.073
F
11.4
4.8
3.9
11.9
1.9
50
11.6 0.449 0.456
5.0 0.189 0.197
4.1 0.153 0.161
12.1 0.468 0.476
2.1 0.075 0.082
1.574
K0
P0
P1
P2
R
T
0.25 0.35 0.0098 0.0137
23.7 24.3 0.933 0.956
W
* on sales type
16/18
STx25NM60ND
Revision history
6
Revision history
Table 8.
Date
Document revision history
Revision
Changes
15-Nov-2007
22-Jan-2008
1
2
First release.
Document status promoted from target specification to
preliminary data.
– Updated Table 3: Thermal data on page 3;
08-Apr-2008
03-Mar-2009
3
4
– Document status promoted from preliminary data to
datasheet.
Qg value has been updated.
17/18
STx25NM60ND
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
18/18
相关型号：
STX30NM60ND
N-channel 600 V, 0.11 Ω, 25 A FDmesh™ II Power MOSFET (with fast diode) TO-220, TO-220FP, D2PAK, I2PAK, TO-247
STMICROELECTR
STX3N4
3000mA, 200V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92, ROHS COMPLIANT PACKAGE-3
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明