VB6851 [STMICROELECTRONICS]
QXGA camera module with auto focus; 支持自动对焦QXGA相机模块型号: | VB6851 |
厂家: | ST |
描述: | QXGA camera module with auto focus |
文件: | 总4页 (文件大小:141K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VB6851
QXGA camera module with auto focus
Data Brief
Features
■ 3.15 megapixel resolution sensor
(2048 x 1536)
■ Integrated auto-focus mechanism
■ High level autofocus control interface
■ 4 element lens
■ Compact size: 8.5 mm x 8.5 mm x 5.9 mm
■ Compatible with SMIA 1.0 profile 2 functional
specification
■ Video data interface - CCP2.0
■ Command interface - CCI
accelerator (e.g. STV0986 ) or application engine
(e.g. STn8815) device can be incorporated in the
phone system to run the algorithms in hardware.
The specifications of these devices are contained
in a separate document.
■ Analog power supply from 2.4 V to 2.9 V
■ Digital power supply from 1.7 V to 2.9 V
■ On-board 10 bit ADC
■ Integral EMC shielding and EMI reduction
The module design is optimized for both footprint
and height. The auto-focus mechanism combined
with a multi-element lens provides excellent
image quality at focus distances from less than
10 cm to infinity. All external components,
including the auto-focus actuator drivers, are
integrated inside the camera module, apart from
two CCI pull-up resistors.
techniques
■ Ultra low power standby mode
■ Analog binning (2x2, 2x4) for low power video
mode
Description
This databrief outlines a high performance
3.15 megapixel auto-focus camera module
(VB6851) for use across a range of mobile phone
handsets and accessories. It is designed to be
used for both high quality stills capture and video
modes. The module is SMIA 1.0 profile 2
compatible and is capable of generating raw
bayer 3 MP images up to 20 fps. The VB6851
supports the CCI control and CCP 2.0 data
interfaces.
VB6851 offers an ultra low power consumption
hardware standby mode consuming less than
30 µW (typ.).
As different phone platforms have different
baseband processors with varying capabilities, it
may not be possible for all phones to support the
associated image processing and auto-focus
algorithms. Where the baseband cannot support
this processing load, a separate hardware
February 2008
Rev 1
1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Overview
VB6851
1
Overview
Figure 1.
System diagram
Figure 2.
Block diagram
VB6851
EXTCLK
XSHUTDOWN
PLL and clock management
VDIG
DGND
Power Mgmt Power-on reset
EXTCLK
XSHUTDOWN
GR
STV0986 Imaging
system controller
VB6851
3 megapixel
auto-focus
camera
Line SRAM
Sensor
control
registers
VCAP
SCL
SDA
X Decoder
or
CCI
VANA
AGND
Column ADC
baseband
(SLC + SDA)
module
or
Dark Cal
Scaling
2056 x 1544
Pixel array
CCP 2.0
application
processor
(STn8815)
(CLKP, CLKN)
CLKP
CLKN
DATAP
DATAN
Defect
Correction
Output
Column ADC
X Decoder
De-rating
Output
Formatter
Line SRAM
Table 1.
Technical specifications
Parameter
Description
Pixel resolution
Sensor technology
Pixel size
2048 x 1536 (QXGA)
ST IMG175 process
1.75 µm x 1.75 µm
+ 81 dB
Exposure control
Analog gain
+ 24 dB (max)
+ 6 dB (max)
Digital gain
Dynamic range
Signal to noise
60 dB
36 dB (@ 100 lux)
Analog: 2.4 V - 2.9 V
Digital: 1.7 V - 1.9 V
Supply voltages
<150 mW in infinity
Average power consumption 20fps
<350 mW at macro including actuator current
8.5 mm x 8.5 mm x 5.9 mm
51° +/- 2 HFOV F/2.8
<|1.0%|
Package size (lxwxh)
Lens
TV distortion
Relative illumination
Package type
System attach
45 % (typ.)
SMIA85 auto-focus
SMIA85 socket
2/4
VB6851
Ordering information
2
Ordering information
Table 2.
Order codes
Order code
Package
Packing
VB6851S0VO/T2(1)
SMIA85AF with CCP2 I/F with socket Tape and reel
1. ECOPACK® package
3
Revision history
Table 3.
Date
07-Feb-2008
Document revision history
Revision
Changes
1
Initial release.
3/4
VB6851
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
相关型号:
VB6851S0VO/T2
QXGA camera module with auto focusWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
VB6871
QXGA camera module with auto-focusWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
VB6871S0VO/TR
QXGA camera module with auto-focusWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
VB7009
Mini-ITX SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VIA
VB7009-10E
Mini-ITX SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VIA
VB7009-12QCE
Mini-ITX SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VIA
VB7009-16
Mini-ITX SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VIA
VB762-070.0M
LVPECL Output Clock OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VB762-155.52M
LVPECL Output Clock OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VB762-200.0M
LVPECL Output Clock OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VB902-120.0M
LVDS Output Clock Oscillator, 120MHz Nom,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VB902-148.5M
LVDS Output Clock Oscillator, 148.5MHz Nom,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明