FN3416LV-24-33 [Schaffner]

Ecosine Low-Voltage Economy Line of Passive Harmonic Filters;


型号：	FN3416LV-24-33
厂家：	Schaffner International Ltd
描述：	Ecosine Low-Voltage Economy Line of Passive Harmonic Filters
文件：	总6页 (文件大小：851K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Economy Line (10% THID) FN 3416 LV

DATASHEET

Ecosine Low-Voltage Economy Line of Passive Harmonic Filters

Economy line of passive harmonic filters for

THID <7%

Approvals

Help to comply with EN 61000-3-12, IEEE-519

and other PQ standards

Support an efficient utilization of electrical

system capacity

Ideal for AC or DC motor drives with 6-pulse

rectifier front-end

Features and benefits

Suitable for 200-240 V diode and thyristor (SCR)

rectifiers applications

FN 3416 LV (50 Hz) models of the ECOsine product

family represent the very compact “economy line”

with a THID performance of ≤7% (with Ldc).

The performance is still sufficient to comply with EN

61000-3-12 or with IEEE-519 for Isc/IL <50. Schaffner

ECOsine filters help to unburden the electrical

infrastructure from excess loading and heat caused

by current harmonics, and therefore support a better

utilization of electric system capacity.

Performance indicators

Lower harmonics also reduce the risk of system

resonances and potential downtime of sensitive

electronic equipment.

FN 3416 LV filters upgrade standard motor drives to

“low-harmonic drives” quickly and easily.

Typical applications

Three-phase power conversion equipment with

front-end six-pulse rectifier (diode or SCR)

Technical specifications

Motor drives, like those used e.g. in pump and fan

applications

Battery chargers, incl. DC fast chargers for e-cars

3x 200 to 240 VAC ±10%

50Hz ±1 Hz (FN 3416 LV)

Nominal operating voltage

Operating frequency

<7% @ rated power (with DC-Link choke)

Total harmonic current distortion THID*

<13% @ rated power (without DC-Link choke)

2.5 to 90 kW

Nominal motor drive input power rating

Efficiency

Typical electrical schematic

>98% @ nominal line voltage and power

According to IEEE-519

Total demand distortion TDD

High potential test voltage

Protection category

P -> E 2500 VAC (2 sec)

IP 20

Internal fan cooling, unregulated

1.6x rated current for 1 minute, once per hour

Cooling

Overload capability

–25°C to +45°C fully operational

Ambient temperature range

–25°C to +70°C transport and storage

+45°C to +55°C derated operation**

UL 94 V-2 or better

Flammability corresponding to

Design corresponding to

MTBF @ 45°C/500 V (Mil-HB-217F)

SCCR***

UL 508, EN 61558-2-20, CE (LVD 2006/95/EC)

200,000 hours

100 kA

TN, TT, IT

Earthing System

*** System requirements: THVD <2%, line voltage unbalance <1%

*** Note: performance specifications in this datasheet refer to six-pulse diode rectifiers.

*** SCR rectifier front-end will produce different results, depending upon the firing angle of the thyristors.

*** Iderated = Inominal * √(70°C-Tamb)/25°C

*** External UL-rated fuses required.

Ecosine passive

Schaffner Group Datasheets 11 Oct 2018

Performance characteristics (for diode rectifiers)

THID – Total harmonic current

distortion

ECOsine high power passive harmonic filter

performance is optimized for rectifiers/motor drives

with a dc-link choke. In such applications, a THID of

roughly 7% can be expected. The use of a dc-link

choke is highly recommended. In a system without

a THID of 13% can be expected.

Displacement power factor

At full load, ECOsine filters yield unity power factor.

At lower load levels, the capacitive current into the

power capacitors of the trap circuit cause a leading

displacement power factor. This is the case with all

types of passive filters with large capacitors. However,

compared to traditional filters the useful range of

Schaffner ECOsine is much extended (cos phi >0.9

from 35 to 100% of rated load).

DC-link voltage

ECOsine harmonic filters have a very low impact on

the dc-link voltage of the motor drive. The voltage

boost/buck as a function of load can be seen in the

performance graph beside. Tolerances are kept

narrow in order to ensure that motor drives do not

suffer from nuisance tripping because of under- or

over-voltage situations.

Ecosine passive

Schaffner Group Datasheets 11 Oct 2018

Filter selection table

Filter*

Input /output

connections

Weight

Rated load power

@ 220 VAC/50 Hz

Power loss**

@ 25°C/50 Hz

[kW]

2.5

[W]

[kg]

FN 3416 LV-10-44

FN 3416 LV-13-44

FN 3416 LV-16-44

FN 3416 LV-24-33

FN 3416 LV-32-33

FN 3416 LV-38-33

FN 3416 LV-45-33

FN 3416 LV-60-34

FN 3416 LV-75-34

FN 3416 LV-90-35

FN 3416 LV-110-35

FN 3416 LV-150-40

FN 3416 LV-180-40

FN 3416 LV-210-40

FN 3416 LV-260-99

FN 3416 LV-320-99

-44

-33

-34

-35

-40

105

153

294

256

306

408

410

493

546

784

817

887

947

988

5.5

7.5

18.5

100

125

135

-99

Filter to be selected by system voltage and load (motor drive) power. Note: the harmonic filter will reduce RMS input current.

Therefore, filter selection by current rating, as it is common for EMC/EMI filters, is not recommended.

** Calculated power loss at rated load power.

Filter application

ECOsine filters are best installed directly at the input of 6-pulse rectifiers. It is possible to connect several non-linear loads (e.g. motor drives) in parallel. In this case the

rating of the filter must match the sum of the power ratings of drives connected to it. The use of a (built-in) DC-link choke is recommended for best harmonics

mitigation performance. If the expected input power exceeds the rating of the largest available filter, and a custom solution is not desired, then two or more filters

can be wired in parallel. In this mode of operation, it is recommended to use filters with equal power ratings to ensure proper current sharing.

Ecosine passive

Schaffner Group Datasheets 11 Oct 2018

Mechanical Data

FN 3416 LV-10 to -110

FN 3416 LV-150 to -210

FN 3416 LV-260 to -320

Ecosine passive

Schaffner Group Datasheets 11 Oct 2018

Dimensions

110

580

280

248

555

225

150

700

450

385

665

350

180

700

450

385

665

350

210

700

450

385

665

350

260

700

450

385

665

350

320

700

450

385

665

350

FN 3416 LV–…

390

185

190

370

140

390

185

190

370

140

390

185

190

370

140

455

250

230

435

200

455

250

230

435

200

455

250

230

435

200

455

280

230

435

200

520

280

248

500

225

520

280

248

500

225

580

280

248

555

225

M10

12.5

All dimensions in mm; 1 inch = 25.4 mm

Tolerances according to: ISO 2768-m/EN 22768-m

Filter connector cross sections

–33

–34

–35

–40

–44

Solid wire

16 mm

35 mm

50 mm

95 mm

10 mm

Flex wire

10 mm

AWG 6

25 mm

AWG 2

50 mm

6 mm

AWG type wire

Recommended torque

AWG 1/0

7–8 Nm

AWG 4/0

AWG 8

1.5–1.8 Nm

4.0–4.5 Nm

17–20 Nm

1.0–1.2 Nm

Please visit www.schaffner.com to find more details on filter connectors.

Installation

For more detailed information and step by step installation guidelines, please consult the user manual at www.schaffner.com or the installation instructions (delivered

with each filter).

Ecosine passive

Schaffner Group Datasheets 11 Oct 2018

Headquarters, global

innovation and development

Sales and application centers

Switzerland

China

Spain

Schaffner Group

Nordstrasse 11

Schaffner EMC Ltd. Shanghai

T20-3 C, No 565 Chuangye Road,

Pudong district

Schaffner EMC España

Calle Caléndula 93, Miniparc III, Edificio E

El Soto de Moraleja, Alcobendas

28109 Madrid

4542 Luterbach

T +41 32 681 66 26

info@schaffner.com

www.schaffner.com

201201 Shanghai

T +86 21 3813 9500

cschina@schaffner.com

www.schaffner.com.cn

T +34 917 912 900

F +34 917 912 901

spainsales@schaffner.com

Finland

Sweden

Schaffner Oy

Schaffner EMC AB

Tegeluddsvägen 76, 2tr

115 28 Stockholm

T +46 8 5050 2425

swedensales@schaffner.com

www.schaffner.com

Sauvonrinne 19 H

08500 Lohja

T +358 50 468 7284

finlandsales@schaffner.com

France

Schaffner EMC S.A.S.

16-20 Rue Louis Rameau

95875 Bezons

Switzerland

Schaffner EMV AG

Nordstrasse 11

T +33 1 34 34 30 60

F +33 1 39 47 02 28

francesales@schaffner.com

4542 Luterbach

T +41 32 681 66 26

switzerlandsales@schaffner.com

Germany

Taiwan R.O.C.

Schaffner Deutschland GmbH

Schoemperlenstrasse 12B

76185 Karlsruhe

Schaffner EMV Ltd.

20 Floor-2, No 97, Section 1, XinTai 5th Road

22175 XiZhi District New Taipei City 22175

T +886 2 2697 5500

T +49 721 56910

F +49 721 569110

F +886 2 2697 5533

germanysales@schaffner.com

taiwansales@schaffner.com

www.schaffner.com.tw

India

Schaffner India Pvt. Ltd

REGUS WORLD TRADE CENTRE

WTC, 22nd Floor Unit No 2238, Brigade

Gateway Campus, 26/1, Dr. Rajkumar Road

Malleshwaram (W)

Thailand

Schaffner EMC Co. Ltd.

Northern Region Industrial Estate

67 Moo 4 Tambon Ban Klang

Amphur Muangg P.O. Box 14

51000 Lamphun

560055 Bangalore

T +91 80 67935355

T +66 53 58 11 04

indiasales@schaffner.com

F +66 53 58 10 19

thailandsales@schaffner.com

Italy

Schaffner EMC S.r.l.

Via Ticino, 30

United Kingdom

Schaffner Ltd.

20900 Monza (MB)

T +39 039 21 41 070

italysales@schaffner.com

5 Ashville Way, Molly Millars Lane

To find your local partner within Schaffner‘s

global network: www.schaffner.com

Wokingham

RG41 2PL Berkshire

T +44 118 9770070

F +44 118 9792969

uksales@schaffner.com

Japan

Schaffner EMC K.K.

1-32-12, Kamiuma, Setagaya-ku

7F Mitsui-seimei Sangenjaya Bldg.

154-0011 Tokyo

The content of this document has been

carefully checked and understood. However,

neither Schaffner nor its subsidiaries assume

any liability whatsoever for any errors or

inaccuracies of this document and the

consequences thereof. Published specifica-

tions are subject to change without notice.

Product suitability for any area of application

must ultimately be determined by the

customer. In all cases, products must never

be operated outside their published

specifications. Schaffner does not guarantee

the availability of all published products. This

disclaimer shall be governed by substantive

Swiss law and resulting disputes shall be

settled by the courts at the place of business

of Schaffner Holding AG. Latest publications

and a complete disclaimer can be downloa-

ded from the Schaffner website. All

trademarks recognized.

USA

Schaffner EMC Inc.

52 Mayfield Avenue

08837 Edison, New Jersey

T +1 800 367 5566

T +1 732 225 9533

F +1 732 225 4789

usasales@schaffner.com

www.schaffnerusa.com

T +81 3 5712 3650

F +81 3 5712 3651

japansales@schaffner.com

www.schaffner.jp

Singapore

Schaffner EMC Pte Ltd.

#05-09, Kg Ubi Ind. Estate

408705 Singapore

Schaffner North America

6722 Thirlane Road

T +65 6377 3283

F +65 6377 3281

24019 Roanoke, Virginia

T +1 276 228 7943

singaporesales@schaffner.com

F +1 276 228 7953

Schaffner North America

823 Fairview Road

24382 Wytheville, Virginia

T +1 276 228 7943

F +1 276 228 7258

FN3416LV-24-33 [Schaffner]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E