CC.001 [TAOGLAS]
SMT C-Clip Connector with 1mm Working Height;
| 型号： | CC.001 |
| 厂家： | 
Taoglas |
| 描述： | SMT C-Clip Connector with 1mm Working Height |
| 文件： | 总8页 (文件大小：415K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SPECIFICATION
Part No.
:
CC.001
Description
Features
: SMT C-Clip Connector with 1mm Working Height
: C-Clip Connector
Board-to-Antenna Application
SMT Footprint 3.2*1.7 mm
Nominal Working Height 1mm
RoHS Compliant
SPE-17-8-015/A/WY
Page 1 of 8
1.Introduction
The Taoglas CC.001 C-Clip connector is designed to be SMT mounted on a PCB as a
contact bridge to antenna pads. This allows the PCB or Flex PCB antenna to be
connected to the system via the C-Clip, eliminating the need for cables and coaxial
RF connectors. The spring contact provides for a positive electrical connection.
Working height of the CC.001 is 1.0mm. The recommended footprint dimension is
3.2*1.7mm.
2.Specification
MECHANICAL
Dimension
Material
3.41*1.5*1.44mm
SUS 301 EH
Finished
100% Au plated over Ni
1mm
Working Height
ENVIROMENTAL
Salt Spray [ISO 9227:2012]
Storage Temperature
48 hours
-40°C to 120°C
-20°C to 70°C
Operating Temperature
SPE-17-8-015/A/WY
Page 2 of 8
3.Drawing
SPE-17-8-015/A/WY
Page 3 of 8
4.Typical Layout
Typical Implementation:
Recommended Clip Positioning:
Recommended Clearance Layout:
Recommended PCB Layout:
SPE-17-8-015/A/WY
Page 4 of 8
5.Evaluation Board (CCD.001)
Note: The evaluation board can be used to confirm and test performance of the
CC.001 clip or the individual board can be used for the testing of the antenna using
CC.001 clip.
SPE-17-8-015/A/WY
Page 5 of 8
6.Recommendation for Reflow Soldering
It is recommended that the maximum soldering temperature should not exceed
260°C for 5 seconds.
Recommended reflow temperature profile:
Stage Reflow temperature requirement
Typical
2.5°C/sec
2-3 mins
3°C/sec
Minimum
160°C
Maximum
180°C
1
2
3
4
Preheating gradient
Soak Time
Maximum reflow gradient
Time above 217°C
30 seconds
230°C for 10
seconds
60 seconds
260°C for 5
seconds
5
6
Peak temperature in reflow
Cooling gradient
-5°C/sec
SPE-17-8-015/A/WY
Page 6 of 8
7.Packaging Information
Packaging information to follow.
SPE-17-8-015/A/WY
Page 7 of 8
Taoglas makes no warranties based on the accuracy or completeness of the contents of this document
and reserves the right to make changes to specifications and product descriptions at any time without
notice. Taoglas reserves all rights to this document and the information contained herein.
Reproduction, use or disclosure to third parties without express permission is strictly prohibited.
Copyright © Taoglas Ltd.
SPE-17-8-015/A/WY
Page 8 of 8
相关型号：
CC007-9999-007
Card Edge Connector, 18 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal
AMPHENOL
©2020 ICPDF网 联系我们和版权申明