FXP07.07.0100A_16 [TAOGLAS]
Flexible PCB Penta Band GSM Antenna;型号: | FXP07.07.0100A_16 |
厂家: | Taoglas |
描述: | Flexible PCB Penta Band GSM Antenna GSM PC |
文件: | 总10页 (文件大小:1154K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPECIFICATION
Part No.
:
FXP07.07.0100A
Product Name
Feature
: Flexible PCB Penta Band GSM Antenna,
100mm Ø1.13 cable, IPEX connector
: Very low profile Penta band GSM
Adhesive tape for easy mounting
RoHS compliant
SPE-11-8-114/C
Page 1 of 10
1. Introduction
FXP07.07.0100A is a general version of stick-on flexible PCB. It is designed with
100mm 1.13mm coaxial cable and the IPEX connector for easy installation.
FXP07.07.0100A is ideal for initial test of FPCB type antenna.
2. Specification
Penta-band Cellular
DCS
Communication System
AMPS
GSM
PCS
UMTS
Frequency (MHz)
Efficiency (ground
plane)
824 ~ 896 880~960 1710~1880 1850~1990 1710~2170
82%
11%
82%
12%
29%
41%
60%
32%
49%
33%
Efficiency (free space)
Impedance
50 Ohm
Radiation Pattern
Polarization
Omni-directional
Linear
FPCB
41.0 x 24.0 mm
IPEX
Connector
Cable
Ø1.13
Cable Length
Adhesive Tape
Operation Temperature
Storage Temperature
100 mm
3M 467
-40℃ ~ +85℃
-40℃ ~ +85℃
SPE-11-8-114/C
Page 2 of 10
3. Electrical Property
3.1
Test Setup
FXP.07 was design with a cell phone size ground plane (110 x 45 mm) so works the
best with this ground plane. Tests were setup to demonstrate its RF properties with
this ground plane, in free space and adhere to a plastic. Satimo SG64 3D-chamber is
used for radiation and efficiency test with 5% tolerance.
FXP.07 with original ground plane
SPE-11-8-114/C
Page 3 of 10
3.2
Mounting instructions and ground-plane connection
Peel back 3m paper. On the underside of the antenna is automotive grade 3m adhesive
(glue) for sticking the FXP.07 directly to plastic (e.g. housing). The antenna can be
curved around housing but should not be folded sharply
This is the antenna trace
Ground connection - this small square
or signal feed and should
pad at the bottom of the FXP.07 can be
be allowed to be free
seen when paper is removed. This
from the PCB and
should be connected to extra ground or
allowed to exist in free
metal to increase efficiency (e.g. allow
area on non metal area
pad to touch the side of a PCB like the
(plastic housing)_
picture above
SPE-11-8-114/C
Page 4 of 10
z
y
x
Free space antenna setup and Satimo SG64 3D-chamber.
z
y
x
FXP.07 places on a plastic in the chamber.
SPE-11-8-114/C
Page 5 of 10
3.3
Radiation Pattern
x-y plane
x-z plane
FXP-07 with ground plane
FXP-07 in free space
FXP-07 adhere on plastic
SPE-11-8-114/C
Page 6 of 10
3.4
Efficiency
100%
80%
60%
40%
20%
Ground Plane
Free Space
Plastic
0%
600
1000
1400
1800
2200
Miniature antennas couple to the ground plane for radiation so the efficiency of the
antenna without a ground plane is largely degrades. These tests demonstrate the best
performance (with the designed ground) and the worst performance (with no ground)
possible of FXP.07. Adhere the antenna to a plastic changes the result, particularly in
higher frequency bands.
SPE-11-8-114/C
Page 7 of 10
3.5
Return Loss
-2
-6
-10
-14
-18
-22
-26
-30
GroundPlane
FreeSpace
Plastic
400
800
1200
1600
2000
2400
Return loss result also indicates that FXP.07 needs to connect to a ground plane for
proper operation.
SPE-11-8-114/C
Page 8 of 10
4. Mechanical Drawing
SPE-11-8-114/C
Page 9 of 10
5. Packaging
SPE-11-8-114/C
Page 10 of 10
相关型号:
FXP07090100A
Flexible PCB Penta Band GSM Antenna, 100mm 1.13cable, right angle MMCX connector
TAOGLAS
©2020 ICPDF网 联系我们和版权申明