B32686S0684566 [TDK]
Metallized Polypropylene Film Capacitors (MFP);型号: | B32686S0684566 |
厂家: | TDK ELECTRONICS |
描述: | Metallized Polypropylene Film Capacitors (MFP) |
文件: | 总20页 (文件大小:430K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Film Capacitors
Metallized Polypropylene Film Capacitors (MFP)
Series/Type:
B32686S
Date:
December 2012
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Metallized polypropylene film capacitors (MFP)
Snubber
B32686S
Typical applications
Snubbering
Filtering
IGBT
Climatic
Max. operating temperature: 110 °C
Climatic category (IEC 60068-1): 55/100/56
Construction
Dielectric: polypropylene (PP)
Film metallized on one side and
metal foils internally connected in series
Plastic case, epoxy resin sealing (UL 94 V-0)
Features
Very high pulse strength
High current
Highest possible contact reliability
RoHS-compatible
Terminals
Strap terminals, tinned copper (max. torque 10 Nm)
Marking
Manufacturer's logo, ordering code, style (MFP)
rated capaitance (coded), cap. tolerance (code letter),
rated DC voltage, date of manufacture (coded)
Delivery mode: Bulk (untaped)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 20
B32686S
Snubber
Dimensional drawings
T1 (code no. 561)
T2 (code no. 562)
T3 (code no. 563)
T4 (code no. 564)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 20
B32686S
Snubber
Dimensional drawings (continued)
T5 (code no. 565)
T6 (code no. 566)
Overview of available types
Type
B32686S
1000
VR (V DC)
1250
450
1600
450
2000
500
VRMS (V AC) 400
CR (nF)
22
33
47
68
100
120
150
220
270
330
390
470
560
680
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 20
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
Max. dimensions IRMS
ESR
Ordering code
Ter-
pcs./
f≤1kHz
w × h × l
100 kHz 100 kHz (composition see
minal MOQ
V DC V AC
1000 400
nF
mm
A
mΩ
20
20
15
15
13
13
10
10
10
7
7
7
7
7
7
5
5
5
5
5
5
5
5
5
5
5
5
3
3
3
below)
68 12.0 × 22.5 × 42.0 4.0
68 12.0 × 22.5 × 42.0 4.0
100 12.0 × 22.5 × 42.0 4.5
100 12.0 × 22.5 × 42.0 4.5
120 12.0 × 22.5 × 42.0 4.5
120 12.0 × 22.5 × 42.0 4.5
150 14.0 × 25.0 × 42.0 5.5
150 14.0 × 25.0 × 42.0 5.5
150 14.0 × 25.0 × 42.0 5.5
220 16.0 × 28.5 × 42.0 7.0
220 16.0 × 28.5 × 42.0 7.0
220 16.0 × 28.5 × 42.0 7.0
270 18.0 × 32.5 × 42.0 7.5
270 18.0 × 32.5 × 42.0 7.5
270 18.0 × 32.5 × 42.0 7.5
330 20.0 × 39.5 × 42.0 8.5
330 20.0 × 39.5 × 42.0 8.5
330 20.0 × 39.5 × 42.0 8.5
330 20.0 × 39.5 × 42.0 8.5
330 20.0 × 39.5 × 42.0 8.5
330 20.0 × 39.5 × 42.0 8.5
390 20.0 × 39.5 × 42.0 9.0
390 20.0 × 39.5 × 42.0 9.0
390 20.0 × 39.5 × 42.0 9.0
390 20.0 × 39.5 × 42.0 9.0
390 20.0 × 39.5 × 42.0 9.0
390 20.0 × 39.5 × 42.0 9.0
470 28.0 × 37.0 × 42.0 10.0
470 28.0 × 37.0 × 42.0 10.0
470 28.0 × 37.0 × 42.0 10.0
470 28.0 × 37.0 × 42.0 10.0
B32686S0683+563 T3
B32686S0683+564 T4
B32686S0104+563 T3
B32686S0104+564 T4
B32686S0124+563 T3
B32686S0124+564 T4
B32686S0154+563 T3
B32686S0154+564 T4
B32686S0154+565 T5
B32686S0224+563 T3
B32686S0224+564 T4
B32686S0224+565 T5
B32686S0274+563 T3
B32686S0274+564 T4
B32686S0274+565 T5
B32686S0334+561 T1
B32686S0334+562 T2
B32686S0334+563 T3
B32686S0334+564 T4
B32686S0334+565 T5
B32686S0334+566 T6
B32686S0394+561 T1
B32686S0394+562 T2
B32686S0394+563 T3
B32686S0394+564 T4
B32686S0394+565 T5
B32686S0394+566 T6
B32686S0474+561 T1
B32686S0474+562 T2
B32686S0474+563 T3
B32686S0474+566 T6
224
384
224
384
224
384
192
288
288
160
192
192
144
128
128
96
96
104
96
96
96
96
96
104
96
96
96
108
108
72
3
108
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 20
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
Max. dimensions IRMS
ESR
Ordering code
Ter-
pcs./
f≤1kHz
w × h × l
100 kHz 100 kHz (composition see
minal MOQ
V DC V AC
1000 400
nF
mm
A
mΩ
3
3
3
3
3
3
3
3
20
20
15
15
15
13
13
13
10
10
10
7
7
7
7
7
7
7
7
7
5
5
5
5
below)
560 28.0 × 37.0 × 42.0 11.0
560 28.0 × 37.0 × 42.0 11.0
560 28.0 × 37.0 × 42.0 11.0
560 28.0 × 37.0 × 42.0 11.0
680 30.0 × 45.0 × 42.0 12.0
680 30.0 × 45.0 × 42.0 12.0
680 30.0 × 45.0 × 42.0 12.0
680 30.0 × 45.0 × 42.0 12.0
68 12.0 × 22.5 × 42.0 4.5
68 12.0 × 22.5 × 42.0 4.5
100 14.0 × 25.0 × 42.0 5.0
100 14.0 × 25.0 × 42.0 5.0
100 14.0 × 25.0 × 42.0 5.0
120 14.0 × 25.0 × 42.0 5.5
120 14.0 × 25.0 × 42.0 5.5
120 14.0 × 25.0 × 42.0 5.5
150 16.0 × 28.5 × 42.0 6.5
150 16.0 × 28.5 × 42.0 6.5
150 16.0 × 28.5 × 42.0 6.5
220 18.0 × 32.5 × 42.0 8.5
220 18.0 × 32.5 × 42.0 8.5
220 18.0 × 32.5 × 42.0 8.5
270 20.0 × 39.5 × 42.0 9.0
270 20.0 × 39.5 × 42.0 9.0
270 20.0 × 39.5 × 42.0 9.0
270 20.0 × 39.5 × 42.0 9.0
270 20.0 × 39.5 × 42.0 9.0
270 20.0 × 39.5 × 42.0 9.0
330 28.0 × 37.0 × 42.0 10.0
330 28.0 × 37.0 × 42.0 10.0
330 28.0 × 37.0 × 42.0 10.0
330 28.0 × 37.0 × 42.0 10.0
B32686S0564+561 T1
B32686S0564+562 T2
B32686S0564+563 T3
B32686S0564+566 T6
B32686S0684+561 T1
B32686S0684+562 T2
B32686S0684+563 T3
B32686S0684+566 T6
B32686S7683+563 T3
B32686S7683+564 T4
B32686S7104+563 T3
B32686S7104+564 T4
B32686S7104+565 T5
B32686S7124+563 T3
B32686S7124+564 T4
B32686S7124+565 T5
B32686S7154+563 T3
B32686S7154+564 T4
B32686S7154+565 T5
B32686S7224+563 T3
B32686S7224+564 T4
B32686S7224+565 T5
B32686S7274+561 T1
B32686S7274+562 T2
B32686S7274+563 T3
B32686S7274+564 T4
B32686S7274+565 T5
B32686S7274+566 T6
B32686S7334+561 T1
B32686S7334+562 T2
B32686S7334+563 T3
B32686S7334+566 T6
108
108
72
108
48
48
72
48
224
384
192
288
288
192
288
288
160
192
192
144
128
128
96
1250 450
96
104
96
96
96
108
108
72
108
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 20
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
Max. dimensions IRMS
ESR
Ordering code
Ter-
pcs./
f≤1kHz
w × h × l
100 kHz 100 kHz (composition see
minal MOQ
V DC V AC
1250 450
nF
mm
A
mΩ
5
5
5
5
5
5
5
5
30
30
20
20
20
15
15
15
13
13
13
10
10
10
10
10
10
7
below)
390 28.0 × 37.0 × 42.0 11.0
390 28.0 × 37.0 × 42.0 11.0
390 28.0 × 37.0 × 42.0 11.0
390 28.0 × 37.0 × 42.0 11.0
470 30.0 × 45.0 × 42.0 12.0
470 30.0 × 45.0 × 42.0 12.0
470 30.0 × 45.0 × 42.0 12.0
470 30.0 × 45.0 × 42.0 12.0
47 12.0 × 22.5 × 42.0 5.0
47 12.0 × 22.5 × 42.0 5.0
68 14.0 × 25.0 × 42.0 6.0
68 14.0 × 25.0 × 42.0 6.0
68 14.0 × 25.0 × 42.0 6.0
100 18.0 × 32.5 × 42.0 7.0
100 18.0 × 32.5 × 42.0 7.0
100 18.0 × 32.5 × 42.0 7.0
120 18.0 × 32.5 × 42.0 7.5
120 18.0 × 32.5 × 42.0 7.5
120 18.0 × 32.5 × 42.0 7.5
150 20.0 × 39.5 × 42.0 8.5
150 20.0 × 39.5 × 42.0 8.5
150 20.0 × 39.5 × 42.0 8.5
150 20.0 × 39.5 × 42.0 8.5
150 20.0 × 39.5 × 42.0 8.5
150 20.0 × 39.5 × 42.0 8.5
220 28.0 × 37.0 × 42.0 10.5
220 28.0 × 37.0 × 42.0 10.5
220 28.0 × 37.0 × 42.0 10.5
220 28.0 × 37.0 × 42.0 10.5
B32686S7394+561 T1
B32686S7394+562 T2
B32686S7394+563 T3
B32686S7394+566 T6
B32686S7474+561 T1
B32686S7474+562 T2
B32686S7474+563 T3
B32686S7474+566 T6
B32686S1473+563 T3
B32686S1473+564 T4
B32686S1683+563 T3
B32686S1683+564 T4
B32686S1683+565 T5
B32686S1104+563 T3
B32686S1104+564 T4
B32686S1104+565 T5
B32686S1124+563 T3
B32686S1124+564 T4
B32686S1124+565 T5
B32686S1154+561 T1
B32686S1154+562 T2
B32686S1154+563 T3
B32686S1154+564 T4
B32686S1154+565 T5
B32686S1154+566 T6
B32686S1224+561 T1
B32686S1224+562 T2
B32686S1224+563 T3
B32686S1224+566 T6
108
108
72
108
48
48
72
48
224
384
192
288
288
144
128
128
144
128
128
96
96
104
96
96
96
1600 450
108
108
72
7
7
7
108
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 20
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
Max. dimensions IRMS
ESR
Ordering code
Ter-
pcs./
f≤1kHz
w × h × l
100 kHz 100 kHz (composition see
minal MOQ
V DC V AC
1600 450
nF
mm
A
mΩ
7
7
7
7
below)
270 30.0 × 45.0 × 42.0 11.5
270 30.0 × 45.0 × 42.0 11.5
270 30.0 × 45.0 × 42.0 11.5
270 30.0 × 45.0 × 42.0 11.5
22 12.0 × 22.5 × 42.0 4.0
22 12.0 × 22.5 × 42.0 4.0
33 14.0 × 25.0 × 42.0 5.0
33 14.0 × 25.0 × 42.0 5.0
33 14.0 × 25.0 × 42.0 5.0
47 16.0 × 28.5 × 42.0 6.0
47 16.0 × 28.5 × 42.0 6.0
47 16.0 × 28.5 × 42.0 6.0
68 18.0 × 32.5 × 42.0 7.5
68 18.0 × 32.5 × 42.0 7.5
68 18.0 × 32.5 × 42.0 7.5
100 20.0 × 39.5 × 42.0 8.5
100 20.0 × 39.5 × 42.0 8.5
100 20.0 × 39.5 × 42.0 8.5
100 20.0 × 39.5 × 42.0 8.5
100 20.0 × 39.5 × 42.0 8.5
100 20.0 × 39.5 × 42.0 8.5
120 28.0 × 37.0 × 42.0 9.0
120 28.0 × 37.0 × 42.0 9.0
120 28.0 × 37.0 × 42.0 9.0
120 28.0 × 37.0 × 42.0 9.0
150 28.0 × 37.0 × 42.0 10.0
150 28.0 × 37.0 × 42.0 10.0
150 28.0 × 37.0 × 42.0 10.0
150 28.0 × 37.0 × 42.0 10.0
B32686S1274+561 T1
B32686S1274+562 T2
B32686S1274+563 T3
B32686S1274+566 T6
B32686S2223+563 T3
B32686S2223+564 T4
B32686S2333+563 T3
B32686S2333+564 T4
B32686S2333+565 T5
B32686S2473+563 T3
B32686S2473+564 T4
B32686S2473+565 T5
B32686S2683+563 T3
B32686S2683+564 T4
B32686S2683+565 T5
B32686S2104+561 T1
B32686S2104+562 T2
B32686S2104+563 T3
B32686S2104+564 T4
B32686S2104+565 T5
B32686S2104+566 T6
B32686S2124+561 T1
B32686S2124+562 T2
B32686S2124+563 T3
B32686S2124+566 T6
B32686S2154+561 T1
B32686S2154+562 T2
B32686S2154+563 T3
B32686S2154+566 T6
48
48
72
48
70
70
50
50
50
30
30
30
20
20
20
15
15
15
15
15
15
13
13
13
13
10
10
10
10
224
384
192
288
288
160
192
192
144
128
128
96
96
104
96
96
96
2000 500
96
96
104
96
108
108
72
108
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 20
B32686S
Snubber
Technical data
Operating temperature range Max. operating temperature Top,max
Upper category temperature Tmax
+110 °C
+100 °C
ꢀ55 °C
+85 °C
Lower category temperature Tmin
Rated temperature TR
Dissipation factor tan δ
at 20 °C
1.0 ꢁ 10-3 (at 10 kHz)
3.0 ꢁ 10-3 (at 10 kHz)
(upper limit values)
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
C
R ≤ 0.33 µF
CR > 0.33 µF
100 GΩ
30000 s
2.0 ꢁ VR, 2 s
TA (°C)
Category voltage VC
DC voltage derating
VC = VR
AC voltage derating
VC,RMS=VRMS
(continuous operation with VDC TA ≤ 85
or VAC at f ≤ 1 kHz)
Operating voltage Vop for
short operating periods
(VDC or VAC at f ≤ 1 kHz)
Damp heat test
85<TA≤100 VC = VR ꢁ (165ꢀTA)/80 VC,RMS=VRMS ꢁ (165ꢀTA)/80
TA (°C)
TA ≤ 85
DC voltage (max. hours) AC voltage (max. hours)
Vop = 1.25 ꢁ VC (2000 h) Vop = 1.0 ꢁ VC,RMS (2000 h)
85<TA≤100 Vop = 1.25 ꢁ VC (1000 h) Vop = 1.0 ꢁ VC,RMS (1000 h)
56 days/40 °C/93% relative humidity
Limit values after damp
heat test
Capacitance change ꢂ∆C/Cꢂ
Dissipation factor change ∆ tan δ
Insulation resistance Rins
≤ 2%
≤ 1.0 ꢁ 10-3 (at 10 kHz)
≥ 50% of minimum
as-delivered values
or time constant τ = CR ꢁ Rins
Reliability:
Failure rate λ
Service life tSL
1 fit (≤ 1 ꢁ 10-9 /h) at 0.5 ꢁ VR, 40 °C
200 000 h at 1.0 ꢁ VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Failure criteria:
Total failure
Short circuit or open circuit
Failure due to variation
of parameters
Capacitance change ꢂ∆C/Cꢂ
Dissipation factor tan δ
> 10%
4 ꢁ upper limit value
< 1500 MΩ (CR≤0.33 µF)
< 500 s (CR>0.33 µF)
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 20
B32686S
Snubber
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt and k0 values
VR (V DC)
1000
VRMS (V AC) dV/dt in V/µs
k0 in V2/µs
4 000 000
7 000 000
11 000 000
18 000 000
400
450
450
500
2 000
2 800
3 500
4 500
1250
1600
2000
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 20
B32686S
Snubber
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
1000 V DC/400 V AC
1250 V DC/450 V AC
1600 V DC/450 V AC
2000 V DC/500 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 20
B32686S
Snubber
Mounting guidelines
1
Soldering
Solderability of leads
1.1
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
235 ±5 °C
2.0 ±0.5 s
Immersion depth
Evaluation criteria:
Visual inspection
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
10 ±1 s
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
5 ±1 s
(lead spacing ≤ 7.5 mm)
uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
MKP
MKT
< 4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 20
B32686S
Snubber
Immersion depth
Shield
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor
body and liquid solder
Evaluation criteria:
Visual inspection
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
∆C/C0
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 20
B32686S
Snubber
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 °C
Temperature inside the capacitor should not exceed the following limits:
ꢀ MKP/MFP 110 °C
ꢀ MKT 160 °C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 20
B32686S
Snubber
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Safety information
Reference chapter
"General technical
information"
Storage conditions Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Flammability
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
5.3
"Flammability"
Resistance to
vibration
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
5.2
"Resistance to vibration"
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 20
B32686S
Snubber
Topic
Safety information
Reference chapter
"Mounting guidelines"
Soldering
Cleaning
Do not exceed the specified time or temperature 1 "Soldering"
limits during soldering.
Use only suitable solvents for cleaning capacitors. 2 "Cleaning"
Embedding of
capacitors in
When embedding finished circuit assemblies in
plastic resins, chemical and thermal influences
3 "Embedding of
capacitors in finished
assemblies"
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 20
B32686S
Snubber
Symbols and terms
Symbol
α
English
German
Wärmeübergangszahl
Heat transfer coefficient
αC
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität
A
Capacitor surface area
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
βC
Humidity coefficient of capacitance
Capacitance
C
CR
Rated capacitance
Nennkapazität
∆C
∆C/C
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
∆C/CR
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung
from rated capacitance)
Time differential
vom Nennwert)
dt
Differentielle Zeit
∆t
Time interval
Zeitintervall
∆T
Absolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
∆tan δ
∆V
Absolute change of dissipation factor
Absolute voltage change
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
dV/dt
Time differential of voltage function (rate Differentielle Spannungsänderung
of voltage rise)
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
∆V/∆t
E
Voltage change per time interval
Activation energy for diffusion
Self-inductance
ESL
ESR
f
Equivalent series resistance
Frequency
Ersatz-Serienwiderstand
Frequenz
f1
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte
AC voltage due to thermal limits
Reduzierung der zulässigen
Wechselspannung
f2
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
fr
Resonant frequency
Resonanzfrequenz
FD
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FT
i
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
IC
Category current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 20
B32686S
Snubber
Symbol
IRMS
English
German
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
(Sinusförmiger) Wechselstrom
iz
Inkonstanz der Kapazität
Impulskennwert
k0
LS
λ
Pulse characteristic
Series inductance
Serieninduktivität
Failure rate
Ausfallrate
λ0
Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest
Pdiss
Pgen
Q
Failure rate, determined by tests
Dissipated power
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Generated power
Heat energy
ρ
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
R
R
Ri
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Innenwiderstand
Rins
RP
RS
S
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
t
T
Temperature
Temperatur
τ
Time constant
Zeitkonstante
tan δ
tan δD
Dissipation factor
Dielectric component of dissipation
factor
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
tan δP
tan δS
TA
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors
Series component of dissipation factor
Ambient temperature
Serienanteil des Verlustfaktors
Umgebungstemperatur
Tmax
Tmin
Upper category temperature
Lower category temperature
Obere Kategorietemperatur
Untere Kategorietemperatur
tOL
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und
and voltage
-spannung
Top
TR
Operating temperature
Rated temperature
Reference temperature
Reference service life
AC voltage
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Wechselspannung
Tref
tSL
VAC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 20
B32686S
Snubber
Symbol
VC
English
German
Category voltage
Category AC voltage
Kategoriespannung
(Sinusförmige)
VC,RMS
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
VCD
Vch
VDC
VFB
Vi
Corona-discharge onset voltage
Charging voltage
DC voltage
Gleichspannung
Fly-back capacitor voltage
Input voltage
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Vo
Output voltage
Vop
Vp
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Impuls-Spitzenspannung
Spannungshub
Vpp
VR
Nennspannung
Amplitude of rated AC voltage
Amplitude der Nenn-Wechselspannung
R
VRMS
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
(Sinusförmige) Wechselspannung
VSC
Vsn
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Snubber capacitor voltage
Z
Impedance
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 20
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 20 of 20
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明