B59100M1145A070 [TDK]

电机保护传感器;


型号：	B59100M1145A070
厂家：	TDK ELECTRONICS
描述：	电机保护传感器电机传感器
文件：	总12页 (文件大小：287K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PTC thermistors as

limit temperature sensors

Motor protection, single sensors

Series/Type:

B59100

Date:

September 2020

and the information contained therein without TDK Electronics' prior express consent is prohibited.

Sensors

Motor protection, single sensors

M1100

Applications

Dimensional drawing

Thermal protection of winding in electric

motors

Limit temperature monitoring

Features

Thermistor pellet with insulating

encapsulation

Low-resistance type, steep R/T curve

Silver-plated and PTFE-insulated AWG 26

litz wires

Dimensions in mm

Extremely fast response due to small

dimensions

Characteristics for sensing temperatures

Tsense = 90 up to 160 °C conform with DIN

VDE V 0898-1-401

Color coding of litz wires to

DIN VDE V 0898-1-401

UL approval to UL 1434

(file number E69802)

RoHS-compatible

Delivery mode

Bulk

General technical data

Max. operating voltage

Measuring voltage¹⁾

Max. measuring voltage¹⁾

(T_A= 0 ... 40 °C)

(T_{A =}ꢀ25 °C ... T_sense+5 K) V_meas

For T_Asee table "Electrical V_meas,max7.5

specifications"

V_max

≤ 2.5

V DC

Rated resistance

(V_PTC≤ 2.5 V)

R_R

V_ins

t_a

T_op

≤ 100

2.5

≤ 3

ꢀ25/ T_sense+23 °C

0/+40 °C

Ω

Insulating test voltage

Thermal threshold time

Operating temperature range

kV AC

(V ≤ V_meas,max

)

(V = V_max

)

1) V_measand V_meas,maxfor 90 °C ≤ T_sense≤ 160 °C acc. to DIN VDE V 0898-1-401.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 2 of 12

Sensors

Motor protection, single sensors

M1100

Electrical specifications and ordering codes

T_sense

Ordering code

(T_senseꢀ ∆T) (T_sense+ ∆T)

(V_PTC≤ 2.5 V) (VPTC ≤ 2.5 V) (V_PTC≤ 7.5 V)

(T_sense+ 15 K) (T_sense+ 23 K)

(V_PTC≤ 7.5 V)

°C

Ω

∆T = ±5 K

≤ 570

≤ 550

≥ 570

≥ 10 k

B59100M1060A070

B59100M1070A070

B59100M1080A070

B59100M1090A070

B59100M1100A070

B59100M1110A070

B59100M1120A070

B59100M1130A070

B59100M1140A070

B59100M1145A070

B59100M1150A070

B59100M1155A070

B59100M1160A070

≥ 1330

≥ 4 k

100

110

120

130

140

145

150

155

160

∆T = ±7 K

170

180

≤ 570

≥ 570

≥ 10 k

B59100M1170A070

B59100M1180A070

Color coding of litz wires (to DIN VDE V 0898-1-401)

T_sense

Color

°C

white/grey

white/brown

white/white

green/green

red/red

brown/brown

grey/grey

blue/blue

white/blue

white/black

black/black

blue/black

blue/red

100

110

120

130

140

145

150

155

160

170

180

white/green

white/red

Please read Cautions and warnings and

Important notes at the end of this document.

Page 3 of 12

Sensors

Motor protection, single sensors

M1100

Reliability data

Test

Standard

Test conditions

ꢁ∆R₂₅/R₂₅ꢁ

Electrical endurance, IEC 60738-1

constant

Storage at V_maxand T_op,max(@ V_max

Test duration: 1000 h

)

< 25%

Damp heat

IEC 60738-1

Temperature of air: 40 °C

Relative humidity of air: 93%

Duration: 56 days

< 10%

< 25%

< 5%

Test according to IEC 60068-2-78

Rapid change

of temperature

T₁= T_op,min(0 V), T₂= T_op,max(0 V)

Number of cycles: 100

Test duration: 30 min

Test according to IEC 60068-2-14, test Na

Vibration

Frequency range: 10 to 55 Hz

Displacement amplitude: 0.75 mm

Test duration: 3 × 2 h

Test according to IEC 60068-2-6, test Fc

Please read Cautions and warnings and

Important notes at the end of this document.

Page 4 of 12

Sensors

Motor protection, single sensors

M1100

Characteristics (typical)

PTC resistance R_PTCversus PTC temperature T_PTC

(measured at low signal voltage)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 5 of 12

Sensors

Motor protection, single sensors

M1100

Characteristics (typical)

PTC resistance R_PTCversus PTC temperature T_PTC

(measured at low signal voltage)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 6 of 12

Sensors

Motor protection, single sensors

M1100

Cautions and warnings

General

TDK Electronics thermistors are designed for specific applications and should not be used for

purposes not identified in our specifications, application notes and data books unless otherwise

agreed with TDK Electronics during the design-in-phase.

Ensure suitability of thermistor through reliability testing during the design-in phase. The ther-

mistors should be evaluated taking into consideration worst-case conditions.

Storage

Store thermistors only in original packaging. Do not open the package prior to processing.

Storage conditions in original packaging: storage temperature ꢀ25 °C ... +45 °C, relative hu-

midity ≤75% annual mean, maximum 95%, dew precipitation is inadmissible.

Avoid contamination of thermistors surface during storage, handling and processing.

Avoid storage of thermistor in harmful environment with effect on function on long-term opera-

tion (examples given under operation precautions).

Use thermistor within the following period after delivery:

ꢀ

Through-hole devices (housed and leaded PTCs): 24 months

Motor protection sensors, glass-encapsulated sensors and probe assemblies: 24 months

Telecom pair and quattro protectors (TPP, TQP): 24 months

Leadless PTC thermistors for pressure contacting: 12 months

Leadless PTC thermistors for soldering: 6 months

SMDs in EIA sizes 3225 and 4032, and for PTCs with metal tags: 24 months

SMDs in EIA sizes 1210 and smaller: 12 months

Handling

PTCs must not be dropped. Chip-offs must not be caused during handling of PTCs.

The ceramic and metallization of the components must not be touched with bare hands. Gloves

are recommended.

Avoid contamination of thermistor surface during handling.

Soldering (where applicable)

Use rosin-type flux or non-activated flux.

Insufficient preheating may cause ceramic cracks.

Rapid cooling by dipping in solvent is not recommended.

Complete removal of flux is recommended.

Standard PTC heaters are not suitable for soldering.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 7 of 12

Sensors

Motor protection, single sensors

M1100

Mounting

Electrode must not be scratched before/during/after the mounting process.

Contacts and housing used for assembly with thermistor have to be clean before mounting. Es-

pecially grease or oil must be removed.

When PTC thermistors are encapsulated with sealing material, the precautions given in chapter

"Mounting instructions", "Sealing and potting" must be observed.

When the thermistor is mounted, there must not be any foreign body between the electrode of

the thermistor and the clamping contact.

The minimum force and pressure of the clamping contacts pressing against the PTC must be

10 N and 50 kPa, respectively. In case the assembly is exposed to mechanical shock and/ or

vibration this force should be higher in order to avoid movement of the PTC during operation.

During operation, the thermistor’s surface temperature can be very high. Ensure that adjacent

components are placed at a sufficient distance from the thermistor to allow for proper cooling at

the thermistors.

Ensure that adjacent materials are designed for operation at temperatures comparable to the

surface temperature of thermistor. Be sure that surrounding parts and materials can withstand

this temperature.

Avoid contamination of thermistor surface during processing.

Operation

Use thermistors only within the specified temperature operating range.

Use thermistors only within the specified voltage and current ranges.

Environmental conditions must not harm the thermistors. Use thermistors only in normal at-

mospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, am-

monia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions. Contact with any

liquids and solvents should be prevented.

Be sure to provide an appropriate fail-safe function to prevent secondary product damage

caused by abnormal function (e.g. use VDR for limitation of overvoltage condition).

This listing does not claim to be complete, but merely reflects the experience of TDK Electronics.

Display of ordering codes for TDK Electronics products

The ordering code for one and the same product can be represented differently in data sheets,

data books, other publications, on the company website, or in order-related documents such as

shipping notes, order confirmations and product labels. The varying representations of the

ordering codes are due to different processes employed and do not affect the

specifications of the respective products. Detailed information can be found on the Internet

under www.tdk-electronics.tdk.com/orderingcodes.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 8 of 12

Sensors

Motor protection, single sensors

M1100

Symbols and terms

Symbol

Term

Area

Capacitance

C_th

Heat capacity

Frequency

Current

I_max

I_R

Maximum current

Rated current

I_res

Residual current

I_PTC

I_r

PTC current

Residual currrent

I_r,oil

I_r,air

I_RMS

I_S

Residual currrent in oil (for level sensors)

Residual currrent in air (for level sensors)

Root-mean-square value of current

Switching current

I_Smax

LCT

Maximum switching current

Lower category temperature

Number (integer)

N_c

Operating cycles at V_max, charging of capacitor

Switching cycles at V_max, failure mode

Power

N_f

P₂₅

P_el

Maximum power at 25 °C

Electrical power

P_diss

R_G

R_min

R_R

Dissipation power

Generator internal resistance

Minimum resistance

Rated resistance @ rated temperature T_R

Tolerance of R_R

∆R_R

R_P

Parallel resistance

R_PTC

R_ref

R_S

PTC resistance

Reference resistance

Series resistance

R₂₅

R_25,match

∆R₂₅

Resistance at 25 °C

Resistance matching per reel/ packing unit at 25 °C

Tolerance of R₂₅

Please read Cautions and warnings and

Important notes at the end of this document.

Page 9 of 12

Sensors

Motor protection, single sensors

M1100

Temperature

Time

T_A

Ambient temperature

t_a

Thermal threshold time

T_C

Ferroelectric Curie temperature

Settling time (for level sensors)

Rated temperature @ 25 °C or otherwise specified in the data sheet

Sensing temperature

t_E

T_R

T_sense

T_op

Operating temperature

T_PTC

t_R

PTC temperature

Response time

T_ref

Reference temperature

T_Rmin

t_S

Temperature at minimum resistance

Switching time

T_surf

UCT

V or V_el

V_c(max)

V_F,max

V_RMS

V_BD

V_ins

V_link,max

V_max

V_max,dyn

V_meas

V_meas,max

V_R

Surface temperature

Upper category temperature

Voltage (with subscript only for distinction from volume)

Maximum DC charge voltage of the surge generator

Maximum voltage applied at fault conditions in protection mode

Root-mean-square value of voltage

Breakdown voltage

Insulation test voltage

Maximum link voltage

Maximum operating voltage

Maximum dynamic (short-time) operating voltage

Measuring voltage

Maximum measuring voltage

Rated voltage

V_PTC

Voltage drop across a PTC thermistor

Temperature coefficient

∆

Tolerance, change

δ_th

Dissipation factor

τ_th

Thermal cooling time constant

Failure rate

Lead spacing (in mm)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 10 of 12

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, we are either unfamiliar with individual customer applications or less familiar with

them than the customers themselves. For these reasons, it is always ultimately incumbent on

the customer to check and decide whether a product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Ma-

terial Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have

any more detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order. We also

reserve the right to discontinue production and delivery of products. Consequently, we

cannot guarantee that all products named in this publication will always be available. The

aforementioned does not apply in the case of individual agreements deviating from the fore-

going for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to our General

Terms and Conditions of Supply.

Page 11 of 12

Important notes

7. Our manufacturing sites serving the automotive business apply the IATF 16949 stan-

dard. The IATF certifications confirm our compliance with requirements regarding the quality

management system in the automotive industry. Referring to customer requirements and cus-

tomer specific requirements (“CSR”) TDK always has and will continue to have the policy of

respecting individual agreements. Even if IATF 16949 may appear to support the acceptance

of unilateral requirements, we hereby like to emphasize that only requirements mutually

agreed upon can and will be implemented in our Quality Management System. For clari-

fication purposes we like to point out that obligations from IATF 16949 shall only become

legally binding if individually agreed upon.

8. The trade names EPCOS, CarXield, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas,

CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,

MiniCell, MKD, MKK, ModCap, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap,

PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID,

SineFormer, SIOV, ThermoFuse, WindCap, XieldCap are trademarks registered or pend-

ing in Europe and in other countries. Further information will be found on the Internet at

www.tdk-electronics.tdk.com/trademarks.

Release 2020-06

Page 12 of 12

B59100M1145A070 [TDK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E