B65807P0000Y038 [TDK]
Ferrites and accessories;
| 型号： | B65807P0000Y038 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Ferrites and accessories |
| 文件： | 总16页 (文件大小：342K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ferrites and accessories
RM 6, RM 6 LPꢀ
Core and accessories
Series/Type:
B65807, B65804, B65808, B65659
Date:
a~í~=pÜÉÉí February 2016
¤ꢀEPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS’ prior express consent is prohibited.ꢀ
ꢀ
EPCOS AG is a TDK Group Company.
RM 6
Core and accessories
Individual parts
Adjusting screw
Part no.
B65659
Page
10
Core
B65807
B65808
3
8
Clamps
Insulating washer 1
Coil former
B65808
B65808
8
5, 6
Core
B65807
B65808
3
8
Threaded sleeve (glued-in)
Insulating washer 2
Example of an assembly set
Also available:
Coil former for SMPS transf.
B65808
6
Coil former forꢀ
ꢀ
ꢀ
power applications
B65808
7
SMD coil former
Clamp
B65821
B65808
9
9
ꢀ
RM 6 low profile:
Core
B65807P 11
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
2
02/16
RM 6
Core
B65807
■ To IEC 62317-4
■ Core without center holeꢀ
for transformer applications
■ Delivery mode: sets
Magnetic characteristics (per set)
withꢀ
withoutꢀ
center hole center hole
6l /Aꢀ
leꢀ
Aeꢀ
Aminꢀ
Ve
0.86ꢀ
26.9ꢀ
31.3ꢀ
—ꢀ
0.78ꢀ
28.6ꢀ
36.6ꢀ
31ꢀ
mm–1ꢀ
mmꢀ
mm2ꢀ
mm2ꢀ
mm3
840
1050
Approx. weight (per set)
m
4.9
5.1
g
ꢀ
ꢀ
ꢀ
Gapped
Material
AL valueꢀ
sꢀ
Pe
Ordering code1)ꢀ
ꢀ
approx.ꢀ
mm
-J without center holeꢀ
-N with threaded sleeveꢀ
-C with center hole
nH
K1
40 r3%
0.80
27.4
B65807+0040A001
M33
63ꢀr3%
100 r3%
0.60
0.38
43.2
68.5
B65807+0063A033
B65807+0100A033
N48
N41
160 r3%
250 r3%
315 r3%
400 r3%
0.22
0.12
0.08
0.05
109
B65807+0160A048
B65807+0250A048
B65807+0315A048
B65807+0400A048
171
215
274
250 r3%
0.17
155
B65807J0250A041
1) Replace the + by the code letter “C” or “N” for the required version. Standard version is “C”.
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
3
02/16
RM 6
Core
B65807
Ungapped
Material
AL valueꢀ
Pe
PVꢀ
Ordering codeꢀ
ꢀ
-C with center holeꢀ
ꢀ
nH
W/set
-J without center hole
N48
N45
N30
T35
T38
T66
N49
N87
N97
N41
2200 +30/–20% 1500
3500 +30/–20% 2180
4300 +30/–20% 2670
6200 +30/–20% 3860
8600 +40/–30% 5350
12300 +40/–30% 7650
B65807C0000R048
B65807J0000R045
B65807J0000R030
B65807J0000R035
B65807J0000Y038
B65807J0000Y066
1700 +30/–20% 1060 < 0.15 ( 50 mT, 500 kHz, 100 qC) B65807J0000R049
2400 +30/–20% 1490 < 0.51 (200 mT, 100 kHz, 100 qC) B65807J0000R087
2400 +30/–20% 1490 < 0.39 (200 mT, 100 kHz, 100 qC) B65807J0000R097
3100 +30/–20% 1930 < 0.16 (200 mT, 25 kHz, 100 qC) B65807J0000R041
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
4
02/16
RM 6
Accessories
B65808
Coil former, squared pins
Material:
GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085:ꢀ
max. operating temperature 155 qC), color code blackꢀ
H
Sumikon PM 9630® E41429 (M) , SUMITOMO BAKELITE CO LTD
>
@
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 qC, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 qC, 3.5 s
Winding:
see Data Book 2013, chapter “Processing notes, 2.1”
For matching clamp and insulating washers see page 8.
Sections
1
ANꢀ
lNꢀ
mm
AR valueꢀ
P:
Pins
Ordering code
mm2
15
30
69
4
5
6
B65808N1004D001
B65808N1005D001
B65808N1006D001
2
14
30
73
4
6
B65808N1004D002
B65808N1006D002
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
5
02/16
RM 6
Accessories
B65808
Coil former for SMPS transformers with line isolation
The creepage distances and clearances are designed such that the coil former is suitable for use
in SMPS transformers with line isolation.
■ Closed center flange with external wire guide
■ Optimized for use with automatic winding machines
Material:
GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085:ꢀ
max. operating temperature 155 qC), color code blackꢀ
F
®
>
@
Sumikon PM 9630 E41429 (M) , SUMITOMO BAKELITE CO LTD
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 qC, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 qC, 3.5 s
Winding:
see Data Book 2013, chapter “Processing notes, 2.1”
For matching clamp and insulating washers see page 8.
Sections
2
ANꢀ
lNꢀ
mm
AR valueꢀ
P:
Pins
8
Ordering code
mm2
14
30
73
B65808N1108D002
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
6
02/16
RM 6
Accessories
B65808
Coil former for power applications with angled pins
Optimized for automatic winding
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:ꢀ
max. operating temperature 155 qC), color code blackꢀ
F
Valox 420-SE0® E45329 (M) , Sabic Innovative Plastic
>
@
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 qC, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 qC, 3.5 s
Winding:
see Data Book 2013, chapter “Processing notes, 2.1”
For matching clamp and insulating washer 1 see page 8.
Sections
1
ANꢀ
lNꢀ
mm
AR valueꢀ
P:
Pins
8
Ordering code
B65808E1508T001
mm2
15
30
69
Hole arrangementꢀ
View in mounting direction
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
7
02/16
RM 6
Accessories
B65808
Clamp
■ With ground terminal, made of stainless spring steel (tinned), 0.4 mm thick
■ Solderability to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 qC, 2 s
■ Also available as strip clamp on reels on request
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 qC), 0.08 mm thickꢀ
>
@
Aryphan F685, E167358 (M) , natural color, LOFO HIGH TECH FILM GMBH
Insulating washer 2 for double-clad PCBs
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 qC), 0.25 mm thickꢀ
>
@
Makrofol FR7-2, E118859 (M) , natural color, BAYER MATERIALSCIENCE AG
Ordering code
Clamp (ordering code per piece, 2 are required)
Insulating washer 1 (reel packing, PU = 1 reel)
Insulating washer 2 (bulk)
B65808B2203X000
B65808A5000X000
B65808C2005X000
Clamp
Insulating washer 1
(preliminary data)
Insulating washer 2
Clamping forces for RM 6
Fmin: Extension of clamp from a to a2 = Xmin
Fmax: Extension of clamp from a to a1 = Xmax
Clamp opening a (mm)
Core nose Zmax (mm)
9.5 +0.2
0.22
Height of core pair X (mm)Xmin ꢀ 10.1ꢀ
Xmax 10.6
Clamping force F (N)
02/16
Fmin ꢀ
Fmax 50
7ꢀ
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
8
RM 6
Accessories
B65808
SMD coil former with gullwing terminals
Material:
GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085:ꢀ
max. operating temperature 155 qC), color code blackꢀ
F
>
@
Vectra E 130i E106764 (M) , POLYPLASTICS CO LTDꢀ
>
@
Vectra E 130i E83005 (M) , TICONA
Solderability: to IEC 60068-2-58, test Td, method 6 (Group 3): 245 qC, 3 s
Resistance to soldering heat: to IEC 60068-2-58, test Td, method 6 (Group 3): 255 qC, 10 sꢀ
permissible soldering temperature for wire-wrap connection on coil former: 400 qC,1 s
Winding:
see Data Book 2013, chapter “Processing notes, 2.1”
Clamp
■ Without ground terminal, made of stainless spring steel, 0.435 mm thick
■ Also available as strip clamp on request
Sections
ANꢀ
lNꢀ
mm
AR valueꢀ
P:
Terminals
8
Ordering code
mm2
1
16.2
31
66
B65821C1008T001
B65808J2204X000
Clamp(ordering code per piece, 2 are required)
Coil former
Clamp
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
9
02/16
RM 6
Accessories
B65821, B65808
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalateꢀ
Pocan B3235® E245249 (M) , LANXESS AG
>
@
Figure
Tube core
Ordering code
u length (mm) Material
Color code
red
a
b
c
2.62 u 3.6
2.75 u 4.4
2.82 u 4.4
N22
N22
N22
B65659F0001X023
B65659F0003X023
B65659F0004X023
black
yellow
a
b
c
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
10 02/16
RM 6 »Low Profile«
Core
B65807P
■ To IEC 62317-4
■ For compact transformers
■ Without center hole
■ Delivery mode: sets
Magnetic characteristics (per set)
6l/A = 0.58 mm–1ꢀ
le
= 21.8 mmꢀ
Ae = 37.5 mm2ꢀ
Amin = 31.2 mm2ꢀ
Ve = 820 mm3
Approx. weight 4.0 g/set
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Ungapped
Material
AL valueꢀ
Pe
PVꢀ
Ordering code
ꢀ
ꢀ
nH
W/set
T38
N49
N92
N87
10500 +40/–30%
2200 +30/–20%
2300 +30/–20%
3000 +30/–20%
4860
B65807P0000Y038
1020 < 0.14 ( 50 mT, 500 kHz, 100 qC) B65807P0000R049
1060 < 0.44 (200 mT, 100 kHz, 100 qC) B65807P0000R092
1390 < 0.40 (200 mT, 100 kHz, 100 qC) B65807P0000R087
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
11 02/16
Ferrites and accessories
Cautions and warnings
Cautions and warnings
Mechanical stress and mounting
Ferrite cores have to meet mechanical requirements during assembling and for a growing number
of applications. Since ferrites are ceramic materials one has to be aware of the special behavior
under mechanical load.
As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing
or tensile load. Especially high cooling rates under ultrasonic cleaning and high static or cyclic loads
can cause cracks or failure of the ferrite cores.
For detailed information see chapter “Definitions”, section 8.1.
Effects of core combination on AL value
Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent
that the initial permeability is dependent on the stress state of the core. The higher the stresses are
in the core, the lower is the value for the initial permeability. Thus the embedding medium should
have the greatest possible elasticity.
For detailed information see chapter “Definitions”, section 8.2.
Heating up
Ferrites can run hot during operation at higher flux densities and higher frequencies.
NiZn-materials
The magnetic properties of NiZn-materials can change irreversible in high magnetic fields.
Processing notes
– The start of the winding process should be soft. Else the flanges may be destroyed.
– Too strong winding forces may blast the flanges or squeeze the tube that the cores can not be
mounted any more.
– Too long soldering time at high temperature (>300 °C) may effect coplanarity or pin arrange-
ment.
– Not following the processing notes for soldering of the J-leg terminals may cause solderability
problems at the transformer because of pollution with Sn oxyd of the tin bath or burned insulation
of the wire. For detailed information see chapter “Processing notes”, section 8.2.
– The dimensions of the hole arrangement have fixed values and should be understood asꢀ
a recommendation for drilling the printed circuit board. For dimensioning the pins, the groupꢀ
of holes can only be seen under certain conditions, as they fit into the given hole arrangement.ꢀ
To avoid problems when mounting the transformer, the manufacturing tolerances for positioning
the customers’ drilling process must be considered by increasing the hole diameter.
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets, ꢀ
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the ꢀ
ordering codes are due to different processes employed and do not affect the ꢀ
specifications of the respective products. Detailed information can be found on the Internet ꢀ
under www.epcos.com/orderingcodes.
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
12 02/16
Ferrites and accessories
Symbols and terms
Symbols and terms
Symbol
Meaning
Unit
Aꢀ
Cross section of coilꢀ
mm2ꢀ
mm2ꢀ
nHꢀ
nHꢀ
mm2ꢀ
mm2ꢀ
P: = 10–6ꢀ:ꢀ
Vs/m2, mTꢀ
Vs/m2, mTꢀ
Vs/m2, mTꢀ
Vs/m2, mTꢀ
Vs/m2, mTꢀ
Vs/m2, mTꢀ
Vs/m2, mTꢀ
F = As/Vꢀ
mm–4.5ꢀ
ꢀ
Aeꢀ
ALꢀ
AL1ꢀ
Aminꢀ
ANꢀ
ARꢀ
Bꢀ
Effective magnetic cross sectionꢀ
Inductance factor; AL = L/N2ꢀ
Minimum inductance at defined high saturation ( Pa)ꢀ
Minimum core cross sectionꢀ
Winding cross sectionꢀ
Resistance factor; AR = RCu/N2ꢀ
RMS value of magnetic flux densityꢀ
Flux density deviationꢀ
Peak value of magnetic flux densityꢀ
Peak value of flux density deviationꢀ
DC magnetic flux densityꢀ
Remanent flux densityꢀ
Saturation magnetizationꢀ
Winding capacitanceꢀ
'Bꢀ
ˆ ꢀ
B
ˆ ꢀ
'B
BDCꢀ
BRꢀ
BSꢀ
C0ꢀ
CDFꢀ
DFꢀ
dꢀ
Eaꢀ
fꢀ
fcutoffꢀ
fmaxꢀ
fminꢀ
frꢀ
Core distortion factorꢀ
Relative disaccommodation coefficient DF = d/Piꢀ
Disaccommodation coefficientꢀ
Activation energyꢀ
Frequencyꢀ
Cut-off frequencyꢀ
Upper frequency limitꢀ
Lower frequency limitꢀ
Resonance frequencyꢀ
Copper filling factorꢀ
ꢀ
Jꢀ
s–1, Hzꢀ
s–1, Hzꢀ
s–1, Hzꢀ
s–1, Hzꢀ
s–1, Hzꢀ
ꢀ
fCuꢀ
gꢀ
Air gapꢀ
mmꢀ
Hꢀ
ˆ ꢀ
H
RMS value of magnetic field strengthꢀ
Peak value of magnetic field strengthꢀ
DC field strengthꢀ
A/mꢀ
A/mꢀ
A/mꢀ
A/mꢀ
10–6 cm/Aꢀ
10–6 cm/Aꢀ
Aꢀ
HDCꢀ
Hcꢀ
hꢀ
h/Pi2ꢀ
Iꢀ
Coercive field strengthꢀ
Hysteresis coefficient of materialꢀ
Relative hysteresis coefficientꢀ
RMS value of currentꢀ
IDCꢀ
Direct currentꢀ
Aꢀ
ˆꢀ
I
Peak value of currentꢀ
Aꢀ
Jꢀ
Polarizationꢀ
Vs/m2ꢀ
kꢀ
Boltzmann constantꢀ
J/Kꢀ
k3ꢀ
k3cꢀ
L
Third harmonic distortionꢀ
Circuit third harmonic distortionꢀ
Inductance
ꢀ
ꢀ
H = Vs/A
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
13 02/16
Ferrites and accessories
Symbols and terms
Symbol
Meaning
Unit
'L/Lꢀ
L0ꢀ
LHꢀ
Relative inductance changeꢀ
Inductance of coil without coreꢀ
Main inductanceꢀ
Hꢀ
Hꢀ
Hꢀ
Lpꢀ
Parallel inductanceꢀ
Hꢀ
Lrevꢀ
Lsꢀ
Reversible inductanceꢀ
Series inductanceꢀ
Hꢀ
Hꢀ
leꢀ
lNꢀ
Nꢀ
Effective magnetic path lengthꢀ
Average length of turnꢀ
Number of turnsꢀ
mmꢀ
mmꢀ
ꢀ
PCuꢀ
Ptransꢀ
PVꢀ
PFꢀ
Qꢀ
Rꢀ
RCuꢀ
Rhꢀ
Copper (winding) lossesꢀ
Transferrable powerꢀ
Relative core lossesꢀ
Performance factorꢀ
Quality factor (Q = ZL/Rs = 1/tanꢀGL)ꢀ
Resistanceꢀ
Copper (winding) resistance (f = 0)ꢀ
Hysteresis loss resistance of a coreꢀ
Rh changeꢀ
Wꢀ
Wꢀ
mW/gꢀ
ꢀ
ꢀ
:ꢀ
:ꢀ
:ꢀ
:ꢀ
:ꢀ
:ꢀ
:ꢀ
K/Wꢀ
:ꢀ
mmꢀ
°Cꢀ
Kꢀ
°Cꢀ
sꢀ
'Rhꢀ
Riꢀ
Rpꢀ
Internal resistanceꢀ
Parallel loss resistance of a coreꢀ
Series loss resistance of a coreꢀ
Thermal resistanceꢀ
Effective loss resistance of a coreꢀ
Total air gapꢀ
Temperatureꢀ
Temperature differenceꢀ
Curie temperatureꢀ
Rsꢀ
Rthꢀ
RVꢀ
sꢀ
Tꢀ
'Tꢀ
TCꢀ
tꢀ
Timeꢀ
tvꢀ
Pulse duty factorꢀ
ꢀ
tanꢀGꢀ
tanꢀGLꢀ
tanꢀGrꢀ
tanꢀGeꢀ
tanꢀGhꢀ
tanꢀG/Piꢀ
Uꢀ
Ûꢀ
Veꢀ
Zꢀ
Zn
Loss factorꢀ
Loss factor of coilꢀ
(Residual) loss factor at H o 0ꢀ
Relative loss factorꢀ
Hysteresis loss factorꢀ
Relative loss factor of material at H o 0ꢀ
RMS value of voltageꢀ
Peak value of voltageꢀ
Effective magnetic volumeꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Vꢀ
Vꢀ
mm3ꢀ
:ꢀ
:/mm
Complex impedanceꢀ
Normalized impedance |Z|n = |Z| /N u (le/Ae)
2
H
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
14 02/16
Ferrites and accessories
Symbols and terms
Symbol
Meaning
Unit
Dꢀ
Temperature coefficient (TK)ꢀ
Relative temperature coefficient of materialꢀ
Temperature coefficient of effective permeabilityꢀ
Relative permittivityꢀ
1/Kꢀ
1/Kꢀ
1/Kꢀ
ꢀ
DFꢀ
Deꢀ
Hrꢀ
)ꢀ
Magnetic fluxꢀ
Vsꢀ
Kꢀ
KBꢀ
Kiꢀ
Efficiency of a transformerꢀ
Hysteresis material constantꢀ
Hysteresis core constantꢀ
ꢀ
mT-1ꢀ
A–1H–1/2ꢀ
Osꢀ
Pꢀ
Magnetostriction at saturation magnetizationꢀ
Relative complex permeabilityꢀ
Magnetic field constantꢀ
Relative amplitude permeabilityꢀ
Relative apparent permeabilityꢀ
Relative effective permeabilityꢀ
Relative initial permeabilityꢀ
ꢀ
ꢀ
P0ꢀ
Paꢀ
Pappꢀ
Peꢀ
Piꢀ
Vs/Amꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Pp'ꢀ
Pp"ꢀ
Prꢀ
Relative real (inductive) component of P (for parallel components)ꢀ ꢀ
Relative imaginary (loss) component of P (for parallel components)ꢀ ꢀ
Relative permeabilityꢀ
ꢀ
Prevꢀ
Ps'ꢀ
Ps"ꢀ
Ptotꢀ
Relative reversible permeabilityꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Relative real (inductive) component of P (for series components)ꢀ
Relative imaginary (loss) component of P (for series components)ꢀ
Relative total permeabilityꢀ
derived from the static magnetization curveꢀ
Resistivityꢀ
Magnetic form factorꢀ
DC time constant WCu = L/RCu = AL/ARꢀ
Angular frequency; Zꢀ= 2 3f
ꢀ
ꢀ
Uꢀ
:m–1ꢀ
mm–1ꢀ
sꢀ
6l/Aꢀ
WCuꢀ
Z
s–1
All dimensions are given in mm.
Surface-mount device
Please read Cautions and warnings andꢀ
Important notes at the end of this document.
15 02/16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell,
MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at www.epcos.com/trademarks.
16 02/16
相关型号：
©2020 ICPDF网 联系我们和版权申明