B72241L0251K102 [TDK]

SIOV metal oxide varistors;


型号：	B72241L0251K102
厂家：	TDK ELECTRONICS
描述：	SIOV metal oxide varistors
文件：	总13页 (文件大小：545K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SIOV metal oxide varistors

Strap varistors, HighE, AdvanceD, LS41 series

Series/Type:

B722*

Date:

January 2018

information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Construction

Rectangular varistor element

Coating: epoxy resin, flame-retardant to UL 94 V-0

Bolt-holed strap terminals for screw fixing or soldering

Bent or straight strap terminals

Features

Dimensions equivalent to SIOV-LS40

High surge current up to 50 kA

Wide operating voltage range 130 … 460 V_RMS

Designed in accordance with the requirements of IEC 61643-1, class II, for low-voltage

surge protection devices

Approvals

CSA

Delivery mode

Vacuum-packed styrofoam box

General technical data

Climatic category

to IEC 60068-1

to CECC 42000

40/85/56

ꢀ25 ... + 85

ꢀ25 ... +110

≥ 2.5

Operating temperature

Storage temperature

Electric strength

°C

kV_RMS

MΩ

to CECC 42 000

Insulation resistance

≥ 10

Please read Cautions and warnings and

Important notes at the end of this document.

Page 2 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Electrical specifications and ordering codes

Maximum ratings (T_A= 85 °C)

Type

V_RMSV_DCI_max

I_n

W_max

P_max

Ordering code

(8/20 µs) (8/20 µs) (2 ms)

1 time

15 times

SIOV-

Bent strap terminals

B72241L0131K100

B72241L0141K100

B72241L0151K100

B72241L0231K100

B72241L0251K100

B72241L0271K100

B72241L0321K100

B72241L0381K100

B72241L0421K100

B72241L0441K100

B72241L0461K100

Straight strap terminals

LS41K130QP

LS41K140QP

LS41K150QP

LS41K230QP

LS41K250QP

LS41K275QP

LS41K320QP

LS41K385QP

LS41K420QP

LS41K440QP

LS41K460QP

130

140

150

230

250

275

320

385

420

440

460

170 50000

180 50000

200 50000

300 50000

320 50000

350 50000

420 50000

505 50000

560 50000

585 50000

615 50000

20000

310

340

360

460

490

550

640

800

910

950

960

1.4

B72241L0131K102

B72241L0141K102

B72241L0151K102

B72241L0231K102

B72241L0251K102

B72241L0271K102

B72241L0321K102

B72241L0381K102

B72241L0421K102

B72241L0441K102

B72241L0461K102

LS41K130QPK2

LS41K140QPK2

LS41K150QPK2

LS41K230QPK2

LS41K250QPK2

LS41K275QPK2

LS41K320QPK2

LS41K385QPK2

LS41K420QPK2

LS41K440QPK2

LS41K460QPK2

130

140

150

230

250

275

320

385

420

440

460

170 50000

180 50000

200 50000

300 50000

320 50000

350 50000

420 50000

505 50000

560 50000

585 50000

615 50000

20000

310

340

360

460

490

550

640

800

910

950

960

1.4

1) I_max= Maximum discharge current to IEC 61643-11, class II

2) I_n= Nominal discharge current to IEC 61643-11, class II

Please read Cautions and warnings and

Important notes at the end of this document.

Page 3 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Characteristics (T_A= 25 °C)

Type

SIOV-

V_v

(1 mA)

∆V_v

(1 mA)

v_c,max

(i_c)

i_c

C_typ

(1 kHz)

Ordering code

Bent strap terminals

B72241L0131K100 LS41K130QP

B72241L0141K100 LS41K140QP

B72241L0151K100 LS41K150QP

B72241L0231K100 LS41K230QP

B72241L0251K100 LS41K250QP

B72241L0271K100 LS41K275QP

B72241L0321K100 LS41K320QP

B72241L0381K100 LS41K385QP

B72241L0421K100 LS41K420QP

B72241L0441K100 LS41K440QP

B72241L0461K100 LS41K460QP

Straight strap terminals

205

220

240

360

390

430

510

620

680

715

750

±10

340

365

395

595

650

710

840

1025

1120

1180

1240

300

5600

5200

4800

3200

2900

2700

2300

1900

1800

1700

1600

B72241L0131K102 LS41K130QPK2 205

B72241L0141K102 LS41K140QPK2 220

B72241L0151K102 LS41K150QPK2 240

B72241L0231K102 LS41K230QPK2 360

B72241L0251K102 LS41K250QPK2 390

B72241L0271K102 LS41K275QPK2 430

B72241L0321K102 LS41K320QPK2 510

B72241L0381K102 LS41K385QPK2 620

B72241L0421K102 LS41K420QPK2 680

B72241L0441K102 LS41K440QPK2 715

B72241L0461K102 LS41K460QPK2 750

±10

340

365

395

595

650

710

840

1025

1120

1180

1240

300

5600

5200

4800

3200

2900

2700

2300

1900

1800

1700

1600

Please read Cautions and warnings and

Important notes at the end of this document.

Page 4 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Dimensional drawings

Bent strap terminals

th_max

L ±1.0

Ordering code

Bent strap terminals

B72241L0131K100

B72241L0141K100

B72241L0151K100

B72241L0231K100

B72241L0251K100

B72241L0271K100

B72241L0321K100

B72241L0381K100

B72241L0421K100

B72241L0441K100

B72241L0461K100

Straight strap terminals

8.1

8.2

8.3

9.0

9.2

9.4

9.9

10.6

10.9

11.1

11.4

ꢀ3.5

ꢀ3.3

ꢀ3.2

ꢀ2.0

ꢀ1.8

ꢀ1.6

ꢀ1.1

ꢀ0.4

0.0

0.2

0.4

SIOV-LS41K ... QP

Weight: 20 ... 40 g

B72241L0131K102

B72241L0141K102

B72241L0151K102

B72241L0231K102

B72241L0251K102

B72241L0271K102

B72241L0321K102

B72241L0381K102

B72241L0421K102

B72241L0441K102

B72241L0461K102

8.1

8.2

8.3

9.0

9.2

9.4

9.9

10.6

10.9

11.1

11.4

4.4

4.5

4.6

5.4

5.6

5.8

6.3

6.9

7.3

7.6

7.8

Straight strap terminals

SIOV-LS41K ... QPK2

Weight: 20 ... 40 g

Please read Cautions and warnings and

Important notes at the end of this document.

Page 5 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Reliability data

Test

Test methods/conditions

Requirement

Varistor voltage

The voltage between two terminals with To meet the specified value

the specified measuring current applied

is called V_V(1 mA_DC@ 0.2 ... 2 s).

Clamping voltage

The maximum voltage between two

terminals with the specified standard

impulse current (8/20 µs) applied.

To meet the specified value

Max. DC operating

voltage

The maximum allowable DC operating I_leak(t = 1000 h) ≤ I_leak(t = 0 h)

voltage V_DCat UCT +5/–0 °C is applied |∆V/V (1 mA)| ≤10%

for 1000 ±48 h.

The leakage current I_leak(t) during test is

recorded.

Then the specimen shall be stored at

room temperature and normal humidity

for 1 to 2 h.

Thereafter, the change of V_Vshall be

measured.

Surge current derating, 10 surge currents (8/20 µs), unipolar,

|∆V/V (1 mA)| ≤10%

8/20 µs interval ≥60 s, amplitude corresponding (measured in direction of

to derating curve for 10 impulses at

20 µs

surge current)

No visible damage

Fast temperature cycling IEC 60068-2-14, test Na, LCT/UCT,

dwell time 30 min, 5 cycles

|∆V/V (1 mA)| ≤10%

No visible damage

Damp heat, steady state IEC 60068-2-78

The specimen shall be subjected to

40 ±2 °C, 90 to 95% r. H. for 56 ±2 days

with 10% of the maximum continuous

|∆V/V (1 mA)| ≤10%

DC operating voltage V_DC

Then stored at room temperature and

normal humidity for 1 to 2 h.

Thereafter, the change of V_Vshall be

measured.

Note:

UCT = Upper category temperature

LCT = Lower category temperature

Please read Cautions and warnings and

Important notes at the end of this document.

Page 6 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

v/i characteristics

v = f (i) for explanation of the characteristics refer to "General technical information", chapter 1.6.3

A = Leakage current, B = Protection level } for worst-case varistor tolerances

SIOV-LS41K130QP(K2) ... K460QP(K2)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 7 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Derating curves

Maximum surge current i_max= f (t_r, pulse train)

For explanation of the derating curves refer to "General technical information", section 1.8.1

SIOV-LS41K130QP(K2) ... K150QP(K2)

SIOV-LS41K230QP(K2) ... K460QP(K2)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 8 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Cautions and warnings

General

1. EPCOS metal oxide varistors are designed for specific applications and should not be used

for purposes not identified in our specifications, application notes and data books unless oth-

erwise agreed with EPCOS during the design-in-phase.

2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs

should be evaluated taking into consideration worst-case conditions.

3. For applications of SIOVs in line-to-ground circuits based on various international and local

standards there are restrictions existing or additional safety measures required.

Storage

1. Store SIOVs only in original packaging. Do not open the package prior to processing.

2. Recommended storage conditions in original packaging:

Storage temperature: ꢀ25 °C ... +45 °C,

Relative humidity:

<75% annual average,

<95% on maximum 30 days a year.

is to be avoided.

Dew precipitation:

3. Avoid contamination of an SIOV's during storage, handling and processing.

4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term

operation (examples given under operation precautions).

5. The SIOV type series should be soldered after shipment from EPCOS within the time speci-

fied:

SIOV-S, -Q, -LS, -B, -SNF

ETFV/ T series, -CU

24 months

12 months.

Handling

1. SIOVs must not be dropped.

2. Components must not be touched with bare hands. Gloves are recommended.

3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the

sharp edge of SIOV electrodes.

Soldering (where applicable)

1. Use rosin-type flux or non-activated flux.

2. Insufficient preheating may cause ceramic cracks.

3. Rapid cooling by dipping in solvent is not recommended.

4. Complete removal of flux is recommended.

5. Temperatures of all preheat stages and the solder bath must be strictly controlled especially

for T series (T14 and T20).

Please read Cautions and warnings and

Important notes at the end of this document.

Page 9 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Mounting

1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic

that will degrade the component’s electrical characteristics.

2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this

reason SIOVs should be physically shielded from adjacent components.

Operation

1. Use SIOVs only within the specified temperature operating range.

2. Use SIOVs only within the specified voltage and current ranges.

3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric con-

ditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas,

sulfuric acid gas etc), corrosive agents, humid or salty conditions.Contact with any liquids and

solvents should be prevented.

Display of ordering codes for EPCOS products

The ordering code for one and the same EPCOS product can be represented differently in data

sheets, data books, other publications, on the EPCOS website, or in order-related documents

such as shipping notes, order confirmations and product labels. The varying representations of

the ordering codes are due to different processes employed and do not affect the

specifications of the respective products. Detailed information can be found on the Internet

under www.epcos.com/orderingcodes

Please read Cautions and warnings and

Important notes at the end of this document.

Page 10 of 13

Strap varistors

B722*

HighE, AdvanceD, LS41 series

Symbols and terms

Symbol

Term

Capacitance

C_typ

Typical capacitance

Current

i_c

Current at which V_{c, max}is measured

Leakage current

I_leak

i_max

Maximum surge current (also termed peak current)

Maximum discharge current

Nominal discharge current to UL 1449

Lower category temperature

Typical inductance

I_max

I_n

LCT

L_typ

P_max

R_ins

R_min

T_A

Maximum average power dissipation

Insulation resistance

Minimum resistance

Ambient temperature

t_r

Duration of equivalent rectangular wave

Upper category temperature

Voltage

UCT

V_clamp

v_{c, max}

V_DC

V_jump

v_max

V_op

Clamping voltage

Maximum clamping voltage at specified current i_c

DC operating voltage

Maximum jump start voltage

Maximum voltage

Operating voltage

V_RMS

V_{RMS, op, max}

V_surge

V_V

AC operating voltage, root-mean-square value

Root-mean-square value of max. DC operating voltage incl. ripple current

Super imposed surge voltage

Varistor voltage

∆V_V

W_LD

W_max

Tolerance of varistor voltage

Maximum load dump

Maximum energy absorption

Lead spacing

All dimensions are given in mm.

The commas used in numerical values denote decimal points.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 11 of 13

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As a

rule we are either unfamiliar with individual customer applications or less familiar with them than

the customers themselves. For these reasons, it is always ultimately incumbent on the customer

to check and decide whether a product with the properties described in the product specification is

suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or failure

before the end of their usual service life cannot be completely ruled out in the current state

of the art, even if they are operated as specified. In customer applications requiring a very high

level of operational safety and especially in customer applications in which the malfunction or

failure of an electronic component could endanger human life or health (e.g. in accident

prevention or life-saving systems), it must therefore be ensured by means of suitable design of the

customer application or other action taken by the customer (e.g. installation of protective circuitry

or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or

failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Material

Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Consequently,

we cannot guarantee that all products named in this publication will always be available.

The aforementioned does not apply in the case of individual agreements deviating from the

foregoing for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms

and Conditions of Supply.

7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard.

The IATF certifications confirm our compliance with requirements regarding the quality

management system in the automotive industry. Referring to customer requirements and

customer specific requirements (“CSR”) TDK always has and will continue to have the policy of

respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of

unilateral requirements, we hereby like to emphasize that only requirements mutually agreed

upon can and will be implemented in our Quality Management System. For clarification

purposes we like to point out that obligations from IATF 16949 shall only become legally binding if

individually agreed upon.

Page 12 of 13

Important notes

8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS,

DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK,

MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar,

SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse,

WindCap are trademarks registered or pending in Europe and in other countries. Further

information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks.

Release 2018-10

Page 13 of 13

B72241L0251K102 [TDK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E