B82422H1152K008 [TDK]

SMD/SMT 电感器(线圈);


型号：	B82422H1152K008
厂家：	TDK ELECTRONICS
描述：	SMD/SMT 电感器(线圈) 电感器
文件：	总8页 (文件大小：492K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMT inductors

SIMID series, SIMID 1210-H

Series/Type:

B82422H

Date:

August 2013

a~í~=pÜÉÉí

@ꢀEPCOS AG 2013. Reproduction, publication and dissemination of this publication, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SMT inductors, SIMID series

SIMID 1210-H

B82422H

Size 1210 (EIA) or 3225 (IEC)

Rated inductance 1 ... 680 μH

Rated current 61 ... 1150 mA

Construction

■ Ferrite drum core

■ Laser-welded winding

■ Flame-retardant molding

Features

■ Temperature range up to +150 °C

■ Very high current handling capability

■ Qualified to AEC-Q200

■ Suitable for lead-free reflow soldering

as referenced in JEDEC J-STD 020D

■ RoHS-compatible

Applications

■ Filtering of supply voltages, coupling, decoupling

■ DC/DC converters, switch-mode power supplies

■ Automotive electronics (e.g. single wire bus systems)

■ Telecommunications

■ Consumer and data processing equipment

■ Industrial electronics

Terminals

■ Base material CuSn6

■ Layer composition Cu, Ag, Sn (lead-free)¹⁾

■ Electro-plated

Marking

■ Marking on component:

Manufacturer and letter “H”, L value (in ꢁH),

tolerance of L value (coded), date of manufacture (YWWD)

■ Minimum data on reel:

Manufacturer, ordering code, L value, quantity, date of packing

Delivery mode and packing units

■ 8-mm blister tape, wound on 180-mm or 330-mm # reel

■ Packing units:

180-mm reel: 2000 pcs./reel

330-mm reel: 7500 pcs./reel

1) Ni-barrier-plated terminals on request (B82422H*50).

Please read Cautions and warnings and

Important notes at the end of this document.

07/13

SMT inductors, SIMID series

SIMID 1210-H

B82422H

Dimensional drawing and layout recommendation

0.6 0.2¹⁾

IND0053-6

3.2 0.2

2.7

1.15

2.1

4.4

0.15 max.

2.5 0.2

Marking

1) Soldering area

IND0496-P-E

Dimensions in mm

Taping and packing

Blister tape

Reel

12.75^+0.15

4 0.1

^_0

14.4 max.

Component

1.5+0.1

2 0.05

8.4^+1.5

^_0

62 1.5

4 0.1

1.0+0.2

Direction of unreeling

2.8

IND0592-V

IND0557-F-E

Dimensions in mm

Please read Cautions and warnings and

Important notes at the end of this document.

07/13

SMT inductors, SIMID series

SIMID 1210-H

B82422H

Technical data and measuring conditions

Rated inductance L_R

Measured with impedance analyzer Agilent 4294A

and test fixture Agilent 16034H at frequency f_L,

RMS voltage 0.1 V, +20 °C

Q factor Q_min

Measured with impedance analyzer Agilent 4294A

and test fixture Agilent 16034H at frequency f_L,

RMS voltage 0.1 V, +20 °C

Rated temperature T_R

Rated current I_R

+105 ꢂC

Maximum permissible DC with inductance decrease

ꢃL/L₀ꢄ 10% and temperature increase

of ꢄ 45 K at rated temperature

Self-resonance frequency f_res,min

Measured with impedance analyzer Agilent 4294A /

E4991A at +20 °C

DC resistance R_max

Measured with Burster Resitomat 2329 at +20 ꢂC

Solderability (lead-free)

Sn95.5Ag3.8Cu0.7: +(245 ꢅ5) °C, (5 ꢅ0.3) s

Wetting of soldering area ꢆ 90%

(based on IEC 60068-2-58)

Resistance to soldering heat

Climatic category

+260 ꢂC, 40 s (as referenced in JEDEC J-STD 020D)

55/150/56 (to IEC 60068-1)

Storage conditions

Mounted: –55°C … +150 °C

Packaged: –25 °C … +40 °C, ꢄ 75% RH

Weight

Approx. 50 mg

Please read Cautions and warnings and

Important notes at the end of this document.

07/13

SMT inductors, SIMID series

SIMID 1210-H

B82422H

Characteristics and ordering codes

L_R

Tolerance

f_L

Q_min

f_Q

I_R

R_max

ꢇ

f_res,minOrdering code¹⁾²⁾

(# 180-mm reel)

ꢁH

MHz

2.52

0.796

1150

900

800

770

700

570

500

390

330

280

230

180

150

120

100

MHz

1.0

ꢅ5% J

7.96 10

0.10

0.14

0.16

0.18

0.25

0.35

0.46

0.72

1.0

150

110

B82422H1102+000

B82422H1152+000

B82422H1222+000

B82422H1332+000

B82422H1472+000

B82422H1682+000

B82422H1103+000

B82422H1153+000

B82422H1223+000

B82422H1333+000

B82422H1473+000

B82422H1683+000

1.5

2.2

3.3

4.7

6.8

ꢅ10% K

7.96 10

2.52 12

2.52 15

0.796 20

1.4

2.1

3.4

100

150

220

330

470

680

4.8

8.0 B82422H1104+000

6.0 B82422H1154+000

5.5 B82422H1224+000

4.5 B82422H1334+000

3.5 B82422H1474+000

3.0 B82422H1684+000

7.5

10.9

13.0

20.0

31.0

Intermediate values and closer tolerances on request.

Higher currents possible at temperatures <T_Ron request.

Sample kit available. Ordering code: B82422X002

For more information refer to chapter “Sample kits".

1) Replace the + by the code letter for the required inductance tolerance.

For reel size # 330 mm the last digit has to be an »8«. Example: B82422H1102M008

2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).

Please read Cautions and warnings and

Important notes at the end of this document.

07/13

SMT inductors, SIMID series

SIMID 1210-H

B82422H

Impedance |Z| versus frequency f

measured with impedance analyzer Agilent

E4991A, typical values at +20 °C

Inductance L versus DC load current I_DC

measured with LCR meter Agilent 4285A,

typical values at +20 °C

Q factor versus frequency f

Current derating I_op/I_R

measured with impedance analyzer

Agilent 4294A, typical values at +20 °C

versus ambient temperature T_A

(rated temperature T_R= +105 °C)

IND0498-R-E

1.2

B82422H

I_op

I_R

1.0

0.8

0.6

0.4

0.2

20 40 60 80 100 120

C 160

T_A

07/13

Cautions and warnings

■ Please note the recommendations in our Inductors data book (latest edition) and in the data

sheets.

– Particular attention should be paid to the derating curves given there.

– The soldering conditions should also be observed. Temperatures quoted in relation to wave

soldering refer to the pin, not the housing.

■ If the components are to be washed varnished it is necessary to check whether the washing

varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,

or on glued joints. In particular, it is possible for washing varnish agent residues to have a

negative effect in the long-term on wire insulation.

Washing processes may damage the product due to the possible static or cyclic mechanical

loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,

which might lead to reduced reliability or lifetime.

■ The following points must be observed if the components are potted in customer applications:

– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic

housing or core. This pressure can have a deleterious effect on electrical properties, and in

extreme cases can damage the core or plastic housing mechanically.

– It is necessary to check whether the potting material used attacks or destroys the wire

insulation, plastics or glue.

– The effect of the potting material can change the high-frequency behaviour of the components.

■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to

breakage of the core.

■ Even for customer-specific products, conclusive validation of the component in the circuit can

only be carried out by the customer.

Please read Cautions and warnings and

Important notes at the end of this document.

07/13

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As

a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them

than the customers themselves. For these reasons, it is always ultimately incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in which

the malfunction or failure of an electronic component could endanger human life or health (e.g.

in accident prevention or life-saving systems), it must therefore be ensured by means of suitable

design of the customer application or other action taken by the customer (e.g. installation of

protective circuitry or redundancy) that no injury or damage is sustained by third parties in the

event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products.

Consequently, we cannot guarantee that all products named in this publication will always be

available. The aforementioned does not apply in the case of individual agreements deviating

from the foregoing for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version

of the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,

CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,

MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,

SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap

are trademarks registered or pending in Europe and in other countries. Further information will

be found on the Internet at www.epcos.com/trademarks.

07/13

B82422H1152K008 [TDK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E