B82464G4102M000 [TDK]

SMD/SMT 电感器(线圈);


型号：	B82464G4102M000
厂家：	TDK ELECTRONICS
描述：	SMD/SMT 电感器(线圈) 测试功率感应器电感器
文件：	总9页 (文件大小：208K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMT power inductors

Size 10.4 u 10.4 u 4.8 (mm)

Series/Type:

B82464G4

Date:

October 2019

a~í~=pÜÉÉí

¤ꢀTDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto

and the information contained therein without TDK Electronics’ prior express consent is prohibited.

SMT power inductors

B82464G4

Size 10.4 x 10.4 x 4.8 (mm)

Rated inductance 0.82 ... 1000 μH

Rated current 0.34 ... 7.6 A

Construction

■ Ferrite core

■ Magnetically shielded

■ Winding: enamel copper wire

■ Winding welded to terminals

Features

■ Temperature range up to +150 °C

■ High rated current

■ Low DC resistance

■ Suitable for lead-free reflow soldering

as referenced in JEDEC J-STD 020D

■ Qualified to AEC-Q200

■ RoHS-compatible

Applications

■ Filtering of supply voltages

■ Coupling, decoupling

■ DC/DC converters

■ Automotive electronics

■ Industrial electronics

Terminals

■ Base material CuFe2P

■ Layer composition Ag, Sn (lead-free)

■ Electro-plated

Marking

■ Marking on component:

Manufacturer, L value (nH, coded),

L tolerance (coded), manufacturing date (YWWD),

two last digits of work order

■ Minimum data on reel:

Manufacturer, ordering code,

L value, quantity, date of packing

Delivery mode and packing unit

■ 16-mm blister tape, wound on 330-mm reel

■ Packing unit: 750 pcs./reel

Please read Cautions and warnings and

Important notes at the end of this document.

10/19

SMT power inductors

B82464G4

Size 10.4 x 10.4 x 4.8 (mm)

Dimensional drawing and layout recommendation

Dimensions in mm

Taping and packing

Blister tape

Reel

Dimensions in mm

Please read Cautions and warnings and

Important notes at the end of this document.

10/19

SMT power inductors

B82464G4

Size 10.4 x 10.4 x 4.8 (mm)

Technical data and measuring conditions

Rated inductance L_R

Measured with impedance analyzer Agilent 4294A or

equivalent at frequency f_L, 0.1 V, +20 °C

Operating temperature range

Rated current I_temp

–55 °C … +150 °C

Max. permissible DC with temperature increase of d 40 K

at +85 °C

Saturation current I_sat

Max. permissible DC with inductance decrease

'L/L₀of approx. 10%

DC resistance R_max

Measured at +20 °C

Solderability (lead-free)

Dip and look method Sn95.5Ag3.8Cu0.7:

+(245 ±5) °C, (5 ±0.3) s

Wetting of soldering area t 90%

(based on IEC 60068-2-58)

Resistance to soldering heat

Climatic category

+260 °C, 40 s (as referenced in JEDEC J-STD 020D)

55/150/56 (to IEC 60068-1)

Storage conditions

Mounted: –55 °C … +150 °C

Packaged: –25 °C … +40 °C, d 75% RH

Weight

Approx. 2 g

Please read Cautions and warnings and

Important notes at the end of this document.

10/19

SMT power inductors

B82464G4

Size 10.4 x 10.4 x 4.8 (mm)

Characteristics and ordering codes

L_R

Tolerance f_L

MHz

0.82 r20% M 0.1

I_sat,typ

I_sat,minI_temp,typR_max

R_typ

Ordering code

13.20

11.00

9.81

7.90

6.88

6.22

4.99

3.80

3.68

2.85

2.34

2.00

1.57

1.30

1.02

0.86

0.80

0.61

0.48

0.40

10.30

10.00

8.50

7.00

5.90

5.20

4.60

3.50

3.10

2.50

2.10

1.80

1.45

1.15

0.90

0.75

0.65

0.55

0.46

0.35

7.60

7.50

7.00

6.50

5.50

4.90

4.30

3.40

2.75

2.25

1.85

1.55

1.30

1.05

0.85

0.70

0.59

0.50

0.42

0.34

0.007

0.009

0.010

0.012

0.015

0.020

0.030

0.040

0.052

0.075

0.095

0.13

0.0047 B82464G4821M000

0.0047 B82464G4102M000

0.0075 B82464G4152M000

0.0080 B82464G4222M000

0.0094 B82464G4332M000

0.0113 B82464G4472M000

0.0151 B82464G4682M000

1.0

1.5

2.2

3.3

4.7

6.8

0.1

0.021

0.031

0.045

0.062

0.080

0.116

0.192

0.28

B82464G4103M000

B82464G4153M000

B82464G4223M000

B82464G4333M000

B82464G4473M000

B82464G4683M000

B82464G4104M000

B82464G4154M000

B82464G4224M000

B82464G4334M000

B82464G4474M000

B82464G4684M000

B82464G4105M000

100

150

220

330

470

680

1000

0.22

0.32

0.44

0.39

0.65

0.56

0.93

0.83

1.30

1.24

2.20

1.93

Please read Cautions and warnings and

Important notes at the end of this document.

10/19

SMT power inductors

B82464G4

Size 10.4 x 10.4 x 4.8 (mm)

Impedance |Z| versus frequency f

measured with impedance analyzer

Agilent 4294A, typical values at +20 °C

Inductance L versus DC load current I_DC

measured with LCR meter Agilent 4285A,

typical values at +20 °C

Current derating I_op/I_R

versus ambient temperature T_A

(rated temperature T_R= +85 °C)

Please read Cautions and warnings and

Important notes at the end of this document.

10/19

Cautions and warnings

■ Please note the recommendations in our Inductors data book (latest edition) and in the data

sheets.

– Particular attention should be paid to the derating curves given there.

– The soldering conditions should also be observed. Temperatures quoted in relation to wave

soldering refer to the pin, not the housing.

■ If the components are to be washed varnished it is necessary to check whether the washing

varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,

or on glued joints. In particular, it is possible for washing varnish agent residues to have a

negative effect in the long-term on wire insulation.

Washing processes may damage the product due to the possible static or cyclic mechanical

loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,

which might lead to reduced reliability or lifetime.

■ The following points must be observed if the components are potted in customer applications:

– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic

housing or core. This pressure can have a deleterious effect on electrical properties, and in

extreme cases can damage the core or plastic housing mechanically.

– It is necessary to check whether the potting material used attacks or destroys the wire, wire

insulation, plastics or glue.

– The effect of the potting material can change the high-frequency behaviour of the components.

– Many coating materials have a negative effect (chemically and mechanically) on the winding

wires, insulation materials and connecting points. Customers are always obligated to

determine whether and to what extent their coating materials influence the component.

Customers are responsible and bear all risk for the use of the coating material. TDK

Electronics does not assume any liability for failures of our components that are caused by the

coating material.

■ Ceramics / Ferrites are sensitive to direct impact. This can cause the core material to flake, or

lead to breakage of the core.

■ Even for customer-specific products, conclusive validation of the component in the circuit can

only be carried out by the customer.

Display of ordering codes for TDK Electronics products

The ordering code for one and the same product can be represented differently in data sheets, data

books, other publications, on the company website, or in order-related documents such as shipping

notes, order confirmations and product labels. The varying representations of the ordering

codes are due to different processes employed and do not affect the specifications of the

respective products. Detailed information can be found on the Internet under

www.tdk-electronics.tdk.com/orderingcodes.

Please read Cautions and warnings and

Important notes at the end of this document.

10/19

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical require-

ments that are often placed on our products in the areas of application concerned. We never-

theless expressly point out that such statements cannot be regarded as binding statements

about the suitability of our products for a particular customer application. As a rule, we

are either unfamiliar with individual customer applications or less familiar with them than the cus-

tomers themselves. For these reasons, it is always ultimately incumbent on the customer to

check and decide whether a product with the properties described in the product specification is

suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or fail-

ure before the end of their usual service life cannot be completely ruled out in the current

state of the art, even if they are operated as specified. In customer applications requiring a

very high level of operational safety and especially in customer applications in which the mal-

function or failure of an electronic component could endanger human life or health (e.g. in acci-

dent prevention or life-saving systems), it must therefore be ensured by means of suitable de-

sign of the customer application or other action taken by the customer (e.g. installation of pro-

tective circuitry or redundancy) that no injury or damage is sustained by third parties in the event

of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this pub-

lication may contain substances subject to restrictions in certain jurisdictions (e.g. be-

cause they are classed as hazardous). Useful information on this will be found in our Material

Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Consequent-

ly, we cannot guarantee that all products named in this publication will always be available. The

aforementioned does not apply in the case of individual agreements deviating from the foregoing

for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms

and Conditions of Supply.

10/19

Important notes

7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard.

The IATF certifications confirm our compliance with requirements regarding the quality manage-

ment system in the automotive industry. Referring to customer requirements and customer spe-

cific requirements (“CSR”) TDK always has and will continue to have the policy of respecting in-

dividual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral re-

quirements, we hereby like to emphasize that only requirements mutually agreed upon can

and will be implemented in our Quality Management System. For clarification purposes we

like to point out that obligations from IATF 16949 shall only become legally binding if individually

agreed upon.

8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP,

CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,

MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine,

PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,

ThermoFuse, WindCap are trademarks registered or pending in Europe and in other coun-

tries. Further information will be found on the Internet at

www.tdk-electronics.tdk.com/trademarks.

Release 2018-10

10/19

B82464G4102M000 [TDK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E