B82472P6684M000 [TDK]

General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 2929, ROHS COMPLIANT;


型号：	B82472P6684M000
厂家：	TDK ELECTRONICS
描述：	General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 2929, ROHS COMPLIANT 测试功率感应器电感器
文件：	总7页 (文件大小：543K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMT power inductors

Size 7.3 u 7.3 u 4.5 (mm)

Series/Type:

B82472P6

Date:

June 2012

Data Sheet

¤ꢀEPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SMT power inductors

B82472P6

Size 7.3 x 7.3 x 4.5 (mm)

Rated inductance 1 ... 1000 μH

Rated current 0.2 ... 3.6 A

Construction

■ Ferrite core

■ Magnetically shielded

■ Winding: enamel copper wire

■ Winding soldered to terminals

■ Injection molded base

Features

■ High mechanical stability

■ Temperature range up to +150 °C

■ High rated current

■ Low DC resistance

■ Suitable for lead-free reflow soldering

as referenced in JEDEC J-STD 020D

■ Qualified to AEC-Q200

■ RoHS-compatible

Applications

■ Filtering of supply voltages

■ Coupling, decoupling

■ DC/DC converters

■ Automotive electronics

Terminals

■ Base material CuSn6P

■ Layer composition Ni, Sn (lead-free)

■ Electro-plated

Marking

■ Marking on component:

L value (PH, coded),

manufacturing date (YWWD)

■ Minimum data on reel:

Manufacturer, ordering code, L value,

quantity, date of packing

Delivery mode and packing unit

■ 16-mm blister tape, wound on 330-mm reel

■ Packing unit: 1000 pcs./reel

Please read Cautions and warnings and

Important notes at the end of this document.

06/12

SMT power inductors

B82472P6

Size 7.3 x 7.3 x 4.5 (mm)

Dimensional drawing and layout recommendation

1.5

4.9

IND0487-U

0.95 0.2

Marking

7.3 0.2

1) Soldering area

Dimensions in mm

IND0835-W-E

Taping and packing

Blister tape

Reel

21 0.5

2.5 0.5

4 0.1

1.5+0.1

2 0.1

Component

13 0.2

1.0

22.4 max.

330 1

IND0347-5

1.5 min.

6.1 max.

12 0.1

Direction of unreeling

IND0382-3-E

Dimensions in mm

Please read Cautions and warnings and

Important notes at the end of this document.

06/12

SMT power inductors

B82472P6

Size 7.3 x 7.3 x 4.5 (mm)

Technical data and measuring conditions

Rated inductance L_R

Measured with LCR meter Agilent 4284A at frequency f_L, 0.1 V,

+20 °C

Rated temperature T_R

Rated current I_R

+85 °C

Max. permissible DC with temperature increase of d 40 K

at rated temperature

Saturation current I_sat

DC resistance R_max

Solderability (lead-free)

Max. permissible DC with inductance decreaseꢀ'L/L₀of approx. 10%

Measured at +20 °C

Dip and look method Sn95.5Ag3.8Cu0.7: +(245 r5) °C, (5 r0.3) s

Wetting of soldering area tꢀ90%

(based on IEC 60068-2-58)

Resistance to soldering heat +260 °C, 40 s (as referenced in JEDEC J-STD 020D)

Climatic category

Storage conditions

55/150/56 (to IEC 60068-1)

Mounted: –55 °C … +150 °C

Packaged: –25 °C … +40 °C, dꢀ75% RH

Weight

Approx. 1.5 g

Characteristics and ordering codes

L_R

Tolerance f_L

MHz

I_R

I_sat

R_max

Ordering code

1.0

1.5

2.2

3.3

4.7

6.8

r20% M 0.1

3.60

3.40

3.00

2.85

2.50

2.15

1.90

1.53

1.45

1.15

1.00

0.82

0.67

0.53

0.43

0.33

0.29

0.25

0.20

3.30

3.00

2.80

2.50

2.00

1.70

1.40

1.35

1.30

1.05

0.90

0.68

0.55

0.43

0.36

0.30

0.25

0.20

0.15

0.017

0.019

0.022

0.025

0.033

0.042

0.055

0.080

0.091

0.15

0.20

0.26

0.39

0.58

0.88

1.70

2.00

2.75

3.85

B82472P6102M000

B82472P6152M000

B82472P6222M000

B82472P6332M000

B82472P6472M000

B82472P6682M000

B82472P6103M000

B82472P6153M000

B82472P6223M000

B82472P6333M000

B82472P6473M000

B82472P6683M000

B82472P6104M000

B82472P6154M000

B82472P6224M000

B82472P6334M000

B82472P6474M000

B82472P6684M000

B82472P6105M000

0.1

100

150

220

330

470

680

1000

Please read Cautions and warnings and

Important notes at the end of this document.

06/12

SMT power inductors

B82472P6

Size 7.3 x 7.3 x 4.5 (mm)

Impedance |Z| versus frequency f

measured with impedance analyzer

Agilent 4294A, typical values at +20 °C

Inductance L versus DC load current I_DC

measured with LCR meter Agilent 4275A,

typical values at +20 °C

IND0845-R

IND0844-E

10⁶

10³

μH

1000 μH

B82472P6

|Z|

100 μH

10²

10⁴

10³

10²

10¹

10⁰

10 μH

10¹

1000 μH

100 μH

10 μH

1 μH

10⁰

1 μH

^_1

10⁵

^_1

^_2

10⁶

10⁷

Hz 10⁸

10⁰

10¹

A 10²

I_DC

Current derating I_op/I_R

versus ambient temperature T_A

(rated temperature T_R= +85 °C)

IND0602-K

1.2

I_op

I_R

1.0

0.8

0.6

0.4

0.2

20 40 60 80 100 120 C 150

T_A

06/12

Cautions and warnings

■ Please note the recommendations in our Inductors data book (latest edition) and in the data

sheets.

– Particular attention should be paid to the derating curves given there.

– The soldering conditions should also be observed. Temperatures quoted in relation to wave

soldering refer to the pin, not the housing.

■ If the components are to be washed varnished it is necessary to check whether the washing

varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,

or on glued joints. In particular, it is possible for washing varnish agent residues to have a

negative effect in the long-term on wire insulation.

Washing processes may damage the product due to the possible static or cyclic mechanical

loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,

which might lead to reduced reliability or lifetime.

■ The following points must be observed if the components are potted in customer applications:

– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic

housing or core. This pressure can have a deleterious effect on electrical properties, and in

extreme cases can damage the core or plastic housing mechanically.

– It is necessary to check whether the potting material used attacks or destroys the wire

insulation, plastics or glue.

– The effect of the potting material can change the high-frequency behaviour of the components.

■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to

breakage of the core.

■ Even for customer-specific products, conclusive validation of the component in the circuit can

only be carried out by the customer.

Please read Cautions and warnings and

Important notes at the end of this document.

06/12

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As

a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them

than the customers themselves. For these reasons, it is always ultimately incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in which

the malfunction or failure of an electronic component could endanger human life or health (e.g.

in accident prevention or life-saving systems), it must therefore be ensured by means of suitable

design of the customer application or other action taken by the customer (e.g. installation of

protective circuitry or redundancy) that no injury or damage is sustained by third parties in the

event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products.

Consequently, we cannot guarantee that all products named in this publication will always be

available. The aforementioned does not apply in the case of individual agreements deviating

from the foregoing for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version

of the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,

DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,

MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,

SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap

are trademarks registered or pending in Europe and in other countries. Further information will

be found on the Internet at www.epcos.com/trademarks.

06/12

B82472P6684M000 [TDK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E