B82498F3150G001 [TDK]
SMD/SMT 电感器(线圈);
| 型号： | B82498F3150G001 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | SMD/SMT 电感器(线圈) 电感器 |
| 文件： | 总10页 (文件大小：490K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT inductors
SIMID series, SIMID 0805-F
Series/Type:
B82498F
Date:
October 2012
Data Sheet
@ꢀEPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
SIMID 0805-F
B82498F
Size 0805 (EIA) and/or 2012 (IEC)
Rated inductance 2.7 ... 6800 nH
Rated current 80 ... 1000 mA
Construction
■ Cubic coil with ceramic or ferrite core
■ Epoxy-molded flat top for vacuum pickup
■ Winding ends welded to terminals
Features
■ High resonance frequency
■ Close inductance tolerance
■ Suitable for lead-free reflow soldering
■ RoHS-compatible
Applications
Resonant circuits, impedance matching for
■ Antenna amplifiers
■ Multimedia
■ Wireless communication systems
■ Car access systems
■ TPMS (Tire Pressure Monitoring System)
■ GPS (Global Positioning System)
Terminals
■ Standard version:
– Base material Al2O3 ceramic and ferrite
– Thick-film coating of Ag/Pd/Pt
■ Gold-plated terminals:
– Base material Al2O3 ceramic
– Layer composition W/Ni/Au
– Electro-plated
– Qualified to AEC-Q200
– Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020D
Marking
■ No marking on component
■ Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing unit
■ 8-mm blister tape, wound on 180-mm reel
■ Packing unit: 3000 pcs./reel
Please read Cautions and warnings and
Important notes at the end of this document.
2
10/12
SMT inductors, SIMID series
SIMID 0805-F
B82498F
Dimensional drawing and layout recommendation
2.3 max.
2+0.2
Metallization
Welding area2)
C
B
Epoxy coating
IND0041-C
0.5 0.11)
0.5 0.11)
1.7 max.
A
B
C
1.5 ꢁ0.2
3.2 ꢁ0.4
1.0 ꢁ0.1
1) Soldering area
2) This area (30% of contact area) should not be used
to assess solderability
IND0542-S-E
Dimensions in mm
Reel
Taping and packing
Blister tape
14.4 max.
4 0.1
13 0.25
1.5+0.1
Component
_0
2 0.05
8.4+1.5
_0
4 0.1
1.9 max.
ø60 min.
Direction of unreeling
IND0581-C
IND0554-E-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
10/12
SMT inductors, SIMID series
SIMID 0805-F
B82498F
Technical data and measuring conditions
Rated inductance LR
Q factor Qmin
Measured with impedance analyzer Agilent E4991A
at frequency fL, 0.1 V, +20 °C
Measured with impedance analyzer Agilent E4991A
at frequency fQ, +20 °C
Rated temperature TR
Rated current IR
+105 ꢂC
Maximum permissible DC with inductance decrease
ꢃL/L0 ꢄ 10% and temperature increase
of ꢄ 20 K at rated temperature
Self-resonance frequency fres,min
DC resistance Rmax
Measured with network analyzer Agilent E8362B, +20 °C
Measured at +20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: +(245 ꢁ5) °C, (5 ꢁ0.3) s
Wetting of soldering area ꢅ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat
Standard version:
+260 ꢂC, 20 s
Gold-plated terminals:
+260 ꢂC, 40 s (as referenced in JEDEC J-STD 020D)
Climatic category
Storage conditions
55/125/56 (to IEC 60068-1)
Mounted: ꢆ55 °C … +125 °C
Packaged: ꢆ25 °C … +40 °C, ꢄ 75% RH
Weight
Approx. 10 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
10/12
SMT inductors, SIMID series
SIMID 0805-F
B82498F
Characteristics and ordering codes
LR
Tolerance
fL
Qmin
fQ
IR
Rmax
fres,min Ordering code1)2)
(standard version)
nH
MHz
MHz
mA
ꢇ
MHz
Core material: ceramic
^
2.7
5.6
6.8
8.2
ꢁ10% K
250
250
250
250
250
250
250
250
250
250
250
250
200
200
200
150
150
150
100
100
100
100
100
100
50
50
50
50
50
50
50
50
60
60
60
65
65
65
60
60
60
55
50
45
45
45
45
45
40
30
23
23
23
1500
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
500
500
500
250
250
250
250
250
250
250
100
50
1000
900
800
700
700
700
650
700
700
700
600
600
600
600
500
500
450
440
400
340
320
270
220
210
190
230
190
180
0.03
0.04
0.05
0.09
0.09
0.09
0.13
0.08
0.08
0.09
0.11
0.12
0.13
0.14
0.18
0.19
0.28
0.31
0.42
0.53
0.70
1.0
9000
7000
6000
5000
5000
4000
3300
3300
2500
2500
2200
2100
2000
1700
1600
1500
1350
1250
1150
1050
950
B82498F3279K000
B82498F3569K000
B82498F3689K000
B82498F3829K000
B82498F3100+000
B82498F3120+000
B82498F3150+000
B82498F3180+000
B82498F3220+000
B82498F3270+000
B82498F3330+000
B82498F3390+000
B82498F3470+000
B82498F3560+000
B82498F3680+000
B82498F3820+000
B82498F3101+000
B82498F3121+000
B82498F3151+000
B82498F3181+000
B82498F3221+000
B82498F3271+000
B82498F3331+000
B82498F3391+000
B82498F3471+000
B82498F3561+000
B82498F3681+000
B82498F3821+000
^
10
ꢁ2% G
^
12
15
ꢁ5% J
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
900
1.5
800
1.6
700
1.9
650
25
1.3
400
25
50
1.7
300
25
50
1.9
300
Higher currents possible at temperatures <TR on request.
Sample kit for standard version available. Ordering code: B82498X001
For more information refer to chapter “Sample kits”.
1) For gold-plated terminals the last digit has to be a “1”. Example: B82498F3279K001
2) Replace the + by the code letter for the required inductance tolerance.
Please read Cautions and warnings and
Important notes at the end of this document.
5
10/12
SMT inductors, SIMID series
SIMID 0805-F
B82498F
Characteristics and ordering codes
LR
Tolerance
fL
Qmin
fQ
IR
Rmax
fres,min Ordering code1)
(standard version)
nH
MHz
MHz
mA
ꢇ
MHz
Core material: ferrite
^
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
ꢁ5% J
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
20
20
20
20
20
20
20
20
20
20
20
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
240
220
200
190
130
120
100
95
0.55
0.65
0.70
0.98
1.60
2.0
440
420
380
350
330
270
250
230
210
180
140
B82498F1102J000
B82498F1122J000
B82498F1152J000
B82498F1182J000
B82498F1222J000
B82498F1272J000
B82498F1332J000
B82498F1392J000
B82498F1472J000
B82498F1562J000
B82498F1682J000
3.3
3.6
90
3.8
85
4.3
80
4.7
Higher currents possible at temperatures <TR on request.
Sample kit of standard version available. Ordering code: B82498X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
Please read Cautions and warnings and
Important notes at the end of this document.
6
10/12
SMT inductors, SIMID series
SIMID 0805-F
B82498F
Impedance |Z| vs. frequency f (ceramic core)
measured with impedance analyzer
Impedance |Z| vs. frequency f (ferrite core)
measured with impedance analyzer
Agilent E4991A, typical values at +20 °C
Agilent E4991A, typical values at +20 °C
IND0547-K
IND0546-M
105
Ω
105
Ω
B82498F
B82498F
|Z|
|Z|
104
103
102
101
100
104
103
102
101
100
6800 nH
4700 nH
2700 nH
1000 nH
820 nH
470 nH
100 nH
106
107
108
Hz 109
106
107
108
Hz 109
f
f
Q factor versus frequency f (ceramic core)
measured with impedance analyzer
Q factor versus frequency f (ferrite core)
measured with impedance analyzer
Agilent E4991A, typical values at +20 °C
Agilent E4991A, typical values at +20 °C
IND0544-Z
IND0545-U
90
40
B82498F
B82498F
80
Q
Q
35
30
25
20
15
10
5
70
6800 nH
4700 nH
2700 nH
1000 nH
27 nH
100 nH
470 nH
820 nH
6.8 nH
2.7 nH
60
50
40
30
20
10
0
106
107
108
Hz 109
f
106
107
Hz 108
f
7
10/12
SMT inductors, SIMID series
SIMID 0805-F
B82498F
Inductance L versus DC load current IDC
measured with RF LCR meter
Agilent 4285A, typical values at +20 °C
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = +105 °C)
IND0549-G
IND0548-H
101
μH
1.2
6.8 μH
B82498F
B82498F
Iop
4.7 μH
IR
2.7 μH
L
1.0
1 μH
100
0.82 μH
0.8
0.6
0.4
0.2
0
0.10 μH
0.01 μH
_1
10
_2
10
_3
10
_2
_1
10
10
100
A 101
I
0
20
40
60
80 100
C 140
TA
8
10/12
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
9
10/12
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
10 10/12
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明