B82559B5332A019 [TDK]
大电流扁平线电感器;型号: | B82559B5332A019 |
厂家: | TDK ELECTRONICS |
描述: | 大电流扁平线电感器 电感器 |
文件: | 总11页 (文件大小:654K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ERU chokes
ERU 19, SMT flat wire high current inductors
Series/Type:
B82559B*A019
Date:
September 2020
Data Sheet
¤ꢀTDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto
and the information contained therein without TDK Electronics’ prior express consent is prohibited.
ERU chokes
B82559B*A019
ERU 19
Helically wound
Rated inductance 1.0 .... 30 μH
Saturation current 11.5 ... 48.1 A
Construction
■ High temperature ferrite core
■ Magnetically shielded
■ Helical winding
■ Self-leaded construction
■ Under body termination
■ 3 pins for improved reliability
Features
■ High rated current
■ Extremely low DC resistance
■ Very low profile and extremely small footprint
■ Suitable for pick-and-place processes
■ RoHS-compatible
■ Easily customized
■ AEC-Q200 qualified
Applications
Energy storage chokes for
■ DC-DC converters
■ VRM modules
■ POL converters
■ Solar converters
Terminals
Lead-free tinned
Marking
Manufacturer, ordering code, date of manufacture and
production place (YYWWD/X),
Delivery mode and packing units
■ Blister tape
Please read Cautions and warnings and
Important notes at the end of this document.
2
09/20
ERU chokes
B82559B*A019
ERU 19
Helically wound
Dimensional drawing and layout recommendation
Dimensions in mm
Circuit diagram
Please read Cautions and warnings and
Important notes at the end of this document.
3
09/20
ERU chokes
B82559B*A019
ERU 19
Helically wound
Taping and packing
Tape:
Dimensions in mm
Reel:
Dimensions in mm
Height (mm)
cavity H (blister tape)
Packing unit
pcs. per reel
component h
nom.
max.
7.65
8.65
8.0
220
210
200
180
9.0
9.25
9.6
10.25
10.6
Please read Cautions and warnings and
Important notes at the end of this document.
4
09/20
ERU chokes
B82559B*A019
ERU 19
Helically wound
Technical data and measuring conditions
Rated inductance LR
Inductance tolerance
Saturation current ISat
Measured at 100 kHz, 0.1 V, +25 °C
r10%
Current that will result in an approximately 20% drop in
the inductance values at the specified temperature
Rated current IR
Current that will cause a '40 K self-heating at room
temperature
DC resistance RDC
Measured at +25 °C, tolerance r10%, typical values
Self-resonant frequency
High voltage: N1 - core
! 2 MHz
200 V DC, 1 s
Solderability
(245 r5) °C, (3 r0.3) s,
(test of wettability of the pins)
wetting of soldering area t95%
(based on IEC 60068-2-58, solder bath method)
Resistance to soldering heat
Operating temperature
To JEDEC J-STD 020D (Tc: +245 °C on pin)
ꢁ40 °C … +150 °C (component)
Storage conditions (packaged)
–25 °C … +40 °C, dꢀ75% RH
Characteristics and ordering codes
LR
Isat, 25°C Isat, 100°C IR
RDC (typ) Height h Approx. Ordering code
(nom.) weight
PH
A
A
m:
0.95
mm
7.65
g
A
1.0
46.6
48.1
43.6
35.1
25.5
21.3
15.8
14.7
13.5
11.5
41.3
41.8
37.6
31.9
22.2
18.8
14.6
12.9
11.8
10.1
36.3
30.2
27.2
25.1
25.1
12.7
11.7
10.7
9.5
9.1
B82559B2102A019
B82559B3152A019
B82559B4222A019
B82559B5332A019
B82559B5472A019
B82559B6682A019
B82559B7103A019
B82559B9153A019
B82559B0203A019
B82559B0303A019
1.5
2.2
1.35
1.80
8.65
9.25
10.3
11.3
12.7
12.7
9.1
3.3
2.25
10.25
10.25
7.65
4.7
2.25
6.8
7.60
10.0
15.0
20.0
30.0
8.80
7.65
9.3
11.00
13.50
17.00
8.65
10.5
11.2
12.6
9.25
8.6
10.25
Please read Cautions and warnings and
Important notes at the end of this document.
5
09/20
ERU chokes
B82559B*A019
ERU 19
Helically wound
Inductance L versus DC load current IDC
The temperature rise 'T is measured at an am- B82559B2102A019
bient temperature of +25 °C. A current is applied
for 30 minutes and the temperature is measured
on top of the inductor which is mounted on a
printed circuit board. No forced air cooling is ap-
plied.
The inductance vs current curves are generated
by measuring the inductors at +25 °C and
+100 °C.
B82559B3152A019
B82559B4222A019
Please read Cautions and warnings and
Important notes at the end of this document.
6
09/20
ERU chokes
B82559B*A019
ERU 19
Helically wound
B82559B5332A019
B82559B5472A019
B82559B6682A019
B82559B7103A019
Please read Cautions and warnings and
Important notes at the end of this document.
7
09/20
ERU chokes
B82559B*A019
ERU 19
Helically wound
B82559B9153A019
B82559B0203A019
B82559B0303A019
Please read Cautions and warnings and
Important notes at the end of this document.
8
09/20
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Display of ordering codes for TDK Electronics products
The ordering code for one and the same product can be represented differently in data sheets, data
books, other publications, on the company website or in order-related documents such as shipping
notes, order confirmations and product labels. The varying representations of the ordering
codes are due to different processes employed and do not affect the specifications of the
respective products. Detailed information can be found on the Internet under
www.tdk-electronics.tdk.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
9
09/20
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical require-
ments that are often placed on our products in the areas of application concerned. We never-
theless expressly point out that such statements cannot be regarded as binding statements
about the suitability of our products for a particular customer application. As a rule, we
are either unfamiliar with individual customer applications or less familiar with them than the cus-
tomers themselves. For these reasons, it is always ultimately incumbent on the customer to
check and decide whether a product with the properties described in the product specification is
suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or fail-
ure before the end of their usual service life cannot be completely ruled out in the current
state of the art, even if they are operated as specified. In customer applications requiring a
very high level of operational safety and especially in customer applications in which the mal-
function or failure of an electronic component could endanger human life or health (e.g. in acci-
dent prevention or life-saving systems), it must therefore be ensured by means of suitable de-
sign of the customer application or other action taken by the customer (e.g. installation of pro-
tective circuitry or redundancy) that no injury or damage is sustained by third parties in the event
of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this pub-
lication may contain substances subject to restrictions in certain jurisdictions (e.g. be-
cause they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequent-
ly, we cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing
for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms
and Conditions of Supply.
10 09/20
Important notes
7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard.
The IATF certifications confirm our compliance with requirements regarding the quality manage-
ment system in the automotive industry. Referring to customer requirements and customer spe-
cific requirements (“CSR”) TDK always has and will continue to have the policy of respecting in-
dividual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral re-
quirements, we hereby like to emphasize that only requirements mutually agreed upon can
and will be implemented in our Quality Management System. For clarification purposes we
like to point out that obligations from IATF 16949 shall only become legally binding if individually
agreed upon.
8. The trade names EPCOS, CarXield, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas,
CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell,
MKD, MKK, ModCap, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap,
PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID,
SineFormer, SIOV, ThermoFuse, WindCap, XieldCap are trademarks registered or pending
in Europe and in other countries. Further information will be found on the Internet at
www.tdk-electronics.tdk.com/trademarks.
Release 2020-06
11 09/20
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明