B82791G2401N001 [TDK]
General Purpose Inductor, 15000uH, 50%, 1 Element, Ferrite-Core, ROHS COMPLIANT;型号: | B82791G2401N001 |
厂家: | TDK ELECTRONICS |
描述: | General Purpose Inductor, 15000uH, 50%, 1 Element, Ferrite-Core, ROHS COMPLIANT PC 测试 功率感应器 电感器 |
文件: | 总7页 (文件大小:763K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Power line chokes
Current-compensated ring core double chokes
250 V AC, 0.25 … 0.9 A, 4.7 … 47 mH
Series/Type:
B82791G/H
Date:
a~í~=pÜÉÉí July 2012
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Power line chokes
B82791G/H
Current-compensated ring core double chokes
Rated voltage 250 V AC
Rated current 0.25 A to 0.9 A
Rated inductance 4.7 mH to 47 mH
Construction
■ Current-compensated ring core double choke
■ Ferrite core with epoxy coating (UL 94 V-0)
■ Polycarbonate case (UL 94 V-0)
■ Sector winding
B82791G
Features
■ Without potting
■ High resonance frequency due to special
winding technique and omission of potting
■ Approx. 1.5% stray inductance
for symmetrical interference suppression
■ Suitable for wave soldering
B82791H
■ Design complies with EN 60938-2 (VDE 0565-2) and UL 1283
■ UL1) and ENEC (VDE) approvals
■ RoHS-compatible
Applications
■ Suppression of common-mode interferences
■ Electronic ballasts in lamps
■ Switch-mode power supplies
Terminals
■ Base material CuNi18Zn20
■ Layer composition Ni, Sn
■ Hot-dipped
■ Pins 0.6 mm
■ Lead spacing 10 15 (mm) or 12.7 5.08/2.54 (mm)
Marking
Manufacturer, approval signs, ordering code, graphic symbol,
rated current, rated voltage, rated inductance, date of manufacture (YYWWD)
Delivery mode
Cardboard box
1) UL approval with 300 V AC.
Please read Cautions and warnings and
Important notes at the end of this document.
2
07/12
Power line chokes
B82791G/H
Current-compensated ring core double chokes
Dimensional drawings and pin configurations
Horizontal version (B82791G)
2.1 max.
3
2
4
1
2.8+0.5
15±0.1
8 max.
17.5 max.
Tolerances to ISO 2768-M
unless otherwise noted.
Dimensions in mm.
3
2
4
1
IND0247-U
Vertical version (B82791H)
Tolerances to ISO 2768-M
unless otherwise noted.
Dimensions in mm.
1) Vertical version with symmetrical lead spacing (5.08 mm 12.7 mm) is available on request (B82791K).
Please read Cautions and warnings and
3
07/12
Important notes at the end of this document.
Power line chokes
B82791G/H
Current-compensated ring core double chokes
Technical data and measuring conditions
Rated voltage VR
Test voltage Vtest
Rated temperature TR
Rated current IR
250 V AC (50/60 Hz)
1500 V AC, 2 s (line/line)
+40 °C or +60 °C
Referred to 50 Hz and rated temperature
Rated inductance LR
Measured with Agilent 4284A at 10 kHz, 0.1 mA, +20 °C
Inductance is specified per winding.
Inductance tolerance
–30/50% at +20 °C
Inductance decreaseL/L0
Stray inductance Lstray,typ
< 10% at DC magnetic bias with IR, +20 °C
Measured with Agilent 4284A at 10 kHz, 5 mA, +20 °C,
typical values
DC resistance Rtyp
Measured at +20 °C, typ. values, specified per winding
Solderability (lead-free)
Sn96.5Ag3.0Cu0.5: +(245 5) °C, (3 0.3) s
Wetting of soldering area 95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
+(260 5) °C, (10 1) s
(to IEC 60068-2-20, test Tb)
Climatic category
Storage conditions (packaged)
Weight
40/125/56 (to IEC 60068-1)
–25 °C … +40 °C, 75% RH
Approx. 3 g
Approvals
EN 60938-2, UL 1283
Characteristics and ordering codes
Approvals
IR
LR
mH
47
30
22
15
10
Lstray,typ Rtyp
TR
°C
Ordering code
A
H
m
Horizontal version
Vertical version
0.25
0.3
0.35
0.4
0.5
0.6
0.7
0.9
600
500
400
250
170
120
75
2400 +40
2200 +40
1900 +40
1350 +40
1000 +40
630 +40
440 +40
250 +60
B82791G2251N020 B82791H2251N020
B82791G2301N001 B82791H2301N001
B82791G2351N001 B82791H2351N001
B82791G2401N001 B82791H2401N001
B82791G2501N001 B82791H2501N001
B82791G2601N001 B82791H2601N001
B82791G2701N001 B82791H2701N001
B82791G2901N020 B82791H2901N020
6.8
4.7
4.7
55
= approval granted
Please read Cautions and warnings and
Important notes at the end of this document.
4
07/12
Power line chokes
B82791G/H
Current-compensated ring core double chokes
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
IND0624-K
106
B82791
Ω
|Z|
105
104
103
102
G/H2251N020
G/H2301N001
G/H2351N001
104
105
106
Hz 107
f
Current derating Iop/IR
versus temperature TA
5
07/12
Cautions and warnings
Current-compensated ring core double chokes
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there. Derating must be applied
in case the ambient temperature in the application exceeds the rated temperature of the
component.
– Ensure the operation temperature (which is the sum of the ambient temperature and the
temperature rise caused by losses / self-heating) of the component in the application does not
exceed the maximum value specified in the climatic category.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
6
07/12
Important notes
Current-compensated ring core double chokes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
7
07/12
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明