CLF5030NIT-1R5N-D [TDK]
General Purpose Inductor,;型号: | CLF5030NIT-1R5N-D |
厂家: | TDK ELECTRONICS |
描述: | General Purpose Inductor, 测试 功率感应器 电感器 |
文件: | 总10页 (文件大小:214K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
I N D U C T O R S
January 2018
Inductors for power circuits
Wound ferrite
CLF-NI-D series (for automotive)
CLF5030NI-Dtype
CLF5030NI-D
(2/10)
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Do not use products that have received any excessive mechanical shock such as by being dropped.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not expose the products to magnets or magnetic fields.
The performance of the product may deteriorate if coating materials are used, thus please assess the situation beforehand by taking
this factor into consideration.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(3/10)
I N D U C T O R S
Product compatible with RoHS directive
Halogen-free
Inductors for power circuits
Wound ferrite
Compatible with lead-free solder
AEC-Q200
Overview of CLF5030NI-D type
FEATURES
Magnetic shield type wound inductor for power circuits.
It can be used at a wide temperature range. –55 to +150°C(Including self-temperature rise)
1 to 470µH, wide E-6 Series lineup allows for various usages.
APPLICATION
Automotive-related equipment (ECM, airbags, headlights, electronic power steering, meters, ABS, other)
PART NUMBER CONSTRUCTION
CLF5030NI
T
-
1R0
N
-
D
Inductance
(µH)
Inductance
tolerance
Series name
Packaging style
Internal code
T
Taping
1R0
100
101
1.0
10
100
M
N
20%
30%
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating Storage
Type
temperature
temperature
(pieces/reel)
(g)
0.24
(°C)
(°C)
CLF5030NI-D
–55 to +150
–55 to +150
2000
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(4/10)
I N D U C T O R S
CLF5030NI-D type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
10 to 30s
Time
t3
5s
T2
180°C
150°C
230°C
245°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(5/10)
I N D U C T O R S
CLF5030NI-D type
SHAPE & DIMENSIONS
5.3 0.2
(
)
2.1
1.6 0.1
1.6 0.1
Dimensions in mm
RECOMMENDED LAND PATTERN
2.0
2.0
2.0
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(6/10)
I N D U C T O R S
CLF5030NI-D type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
Measuring
frequency
DC resistance Rated current*
Isat
Part No.
Itemp
(A)typ.
3.70
3.40
3.10
2.60
2.10
1.85
1.70
1.40
1.20
0.88
0.68
0.59
0.40
0.32
0.28
0.20
0.17
(µH)
1.0
Tolerance
30%
30%
30%
30%
30%
30%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
(kHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(Ω)
(A)max.
5.00
3.69
3.42
2.70
2.43
2.07
1.60
1.30
1.10
0.94
0.75
0.68
0.56
0.44
0.38
0.29
0.24
(A)typ.
6.00
5.20
4.53
3.60
3.18
2.58
2.15
1.75
1.42
1.20
1.00
0.86
0.68
0.57
0.46
0.39
0.31
0.019
0.023
0.030
0.040
0.060
0.075
0.095
0.140
0.200
0.310
0.435
0.530
0.880
1.290
2.530
3.400
4.400
CLF5030NIT-1R0N-D
CLF5030NIT-1R5N-D
CLF5030NIT-2R2N-D
CLF5030NIT-3R3N-D
CLF5030NIT-4R7N-D
CLF5030NIT-6R8N-D
CLF5030NIT-100M-D
CLF5030NIT-150M-D
CLF5030NIT-220M-D
CLF5030NIT-330M-D
CLF5030NIT-470M-D
CLF5030NIT-680M-D
CLF5030NIT-101M-D
CLF5030NIT-151M-D
CLF5030NIT-221M-D
CLF5030NIT-331M-D
CLF5030NIT-471M-D
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
Rated current: smaller value of either Isat or Itemp.
Isat: When based on the inductance change rate (30% below the nominal value)
Itemp: When based on the temperature increase (Temperature increase of 40°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4285A
AN-114N
4285A+42841A+42842C
Keysight Technologies
ADEX
Keysight Technologies
DC resistance
Rated current Isat
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(7/10)
I N D U C T O R S
CLF5030NI-D type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
1000
471
331
221
151
100
101
680
470
330
220
150
10
100
6R8
4R7
3R3
2R2
1R5
1
1R0
0.1
10
100
1000
10000
100000
(
)
Frequency kHz
○ Measurement equipment
Product No.
Manufacturer
4294A
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(8/10)
I N D U C T O R S
CLF5030NI-D type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
471
331
221
151
100
101
680
470
330
220
150
10
100
6R8
4R7
3R3
2R2
1R5
1
1R0
0.1
0
1
2
3
4
5
6
( )
DC current A
○ Measurement equipment
Product No.
4294A
Manufacturer
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(9/10)
I N D U C T O R S
CLF5030NI-D type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
E
Type
CLF5030NI-D
A
ø330
W1
13.5
W2
17.5
N
ø100
E
2
* These values are typical values.
(
)
1.0
ø13.0 0.5
ø21.0 0.8
W1
W2
A
Dimensions in mm
TAPE DIMENSIONS
øD0
P2
P0
P1
K2
t
Dimensions in mm
A
Type
A
B
øD0
E
F
P0
P1
P2
W
K2
t
CLF5030NI-D
5.7
5.4
1.5+0.1/-0 1.75 0.1 5.5 0.1 4.0 0.1 8.0 0.1 2.0 0.1 12.0 0.3 3.6
0.4
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
(10/10)
I N D U C T O R S
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180130 / inductor_automotive_power_clf5030ni-d_en.
相关型号:
©2020 ICPDF网 联系我们和版权申明