CUT75-522/T [TDK]

AC-DC电源;


型号：	CUT75-522/T
厂家：	TDK ELECTRONICS
描述：	AC-DC电源
文件：	总6页 (文件大小：2136K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CUT75 Series

https://product.tdk.com/en/power/cut

www.emea.lambda.tdk.com/cut

75W Dual or Triple Output Low Proﬁle Power Supplies

The triple output CUT75 power supplies have two independent, isolated, converters, one for the main 5V output, and one for the auxiliary outputs. This topol-

ogy provides several beneﬁts - no minimum loading, enhanced load & line regulation and the ability to connect the auxiliary outputs in series to generate either

a 24V or 30V output. The series is certiﬁed to both the IEC60601-1 and IEC62368-1 safety standards. Several mechanical conﬁgurations are available - open

frame, an attached baseplate or with a baseplate and cover enclosure. Screw terminal blocks for the input and output connectors can also be selected.

Features

Beneﬁts

• 3 x 5 Footprint With a Low 1.06” (27mm) Height

• Output 1 Isolated From Outputs 2 & 3

• No Minimum Loading

• Space Saving in End Equipment

• Flexible Utilization

• Reduced Load Regulation

• Versatile Mounting

• Open Frame, Baseplate or Enclosed Formats

• Three Year Warranty

• Low Cost of Ownership

Model Selector

Model

Voltage

(V)

Adjustable

Range (V)

Max

Current (A)

Max

Power (W)

Load Reg

(mV)

Line Reg

Ripple Noise

(mV) ⁽¹⁾

(mV)⁽¹⁾

+12

-12

5 - 5.25

Fixed

5 - 5.25

Fixed

8.0

3.0

1.0

8.0

1.0

40.0

36.0

100

600

100

750

240

120

150

120

150

CUT75-522

CUT75-5FF

40.0

24.0

300

(Leave common terminal unconnected)

5 - 5.25

Fixed

5 - 5.25

Fixed

+15

-15

8.0

2.5

1.0

8.0

1.0

40.0

100

750

100

750

300

120

150

120

150

37.5

300

(Leave common terminal unconnected)

CUT75-

522

blank Open frame with JST connectors

Output voltage see model selector

Cover with JST connectors

/TA

/TB

Baseplate with JST connectors

Open frame with screw connections

Cover with screw connections

Baseplate with screw connections

Preferred model

CUT75 Series

Speciﬁcations

Model

CUT75-522

CUT75-5FF

Input

Input Voltage Range(1)

Input Frequency

85 - 265Vac or 120 - 370Vdc*

47 - 63

Input Current(100/200Vac)

Inrush Current at 200Vac (typ) (Cold Start)

Leakage Current (265Vac 50Hz)

Hold Up Time(typ) at 110/220Vac Input

Efﬁciency (200Vac)

2 / 1

less than 0.3

Conducted & Radiated EMI

Immunity

EN55011/EN55032-B, FCC Class B

IEC61000-4-2, -3, -4, -5, -6, -8, -11

Safety Certiﬁcations and Markings

IEC/UL/CSA/EN62368-1, IEC/EN/ES/CSA60601-1, CE Mark and UKCA Mark

Immunity

Test

Standard

EN61000-4-2

Test Level

Criteria

Notes

ESD

Air ±15kV and contact ±8kV

80M -1GHz: 10V/m

1.4 - 2.0GHz: 3V/m

2.0 - 2.7GHz: 1V/m

±4kV

Radiated Susceptibility

EN61000-4-3

Electrical Fast Transient Burst

Surge

EN61000-4-4

EN61000-4-5

Normal ±2kV

Common ±4kV

10Vrms

See IEC61000 immunity test report on website

Conducted Susceptibility

Magnetic Fields

EN61000-4-6

EN61000-4-8

30A/m

30% 500ms

60% 10ms

Voltage Dips

EN61000-4-11

100% 20ms

100% 5000ms

CUT75 Series

Speciﬁcations

Model

CUT75-522

CUT75-5FF

Output

Output Voltage Adjustment

Switching Frequency

Load Regulation

See model selector table

100

kHz

See model selector table

V1: <0.02, V2 & 3 <0.03 (-20 to +70°C)

No minimum load required

>105. Hiccup with auto recovery

Ripple & Noise

Temperature Coefﬁcient

Minimum Load

%/°C

Overcurrent Protection

Overvoltage Protection⁽²⁾

Remote Sense

V1: 5.7-7.0, V2: 13.8 - 16.8

V1: 5.7-7.0, V2: 17.2 - 21.0

Remote On/Off

Parallel Operation

Series Operation

Not possible

Environmental

Operating Temperature⁽³⁾

Operating Humidity

Storage Temperature

Humidity (non condensing)

Cooling

°C

%RH

°C

-20 to +70 (See derating drawing for open frame model)(3)

5 - 95 (Non Condensing)

-30 to +85

%RH

5 - 95

Convection cooling

Altitude

3000

Input to Ground: 2,000, Input to Output: 3,000, Output to Ground: 500, CH1 - V2/V3: 500

10-55Hz (Sweep for 1min.)

Withstand Voltage (For 1 minute)

Vibration (Non operating)

Vac

19.6m/s²Constant X,Y,Z 1 hour each

Shock (Non operating, in package)

Other

Less than 196.1m/s², 11ms

Weight (Typ)

Open Frame: 210, Enclosed (/A): 400

Open Frame: 127 x 76 x 27

Enclosed (/A): 130 x 82 x 38

Open Frame: 5.0 x 3 x 1.06

Enclosed (/A): 5.12 x 3.23 x 1.5

JST or screw terminal blocks (/T sufﬁx)

169,333

Size (LxWxH)

Inches

Connectors

MTBF - JEITA RCR-9102B(4)

Warranty

Hours

yrs

Notes

See website for detailed speciﬁcations, test methods and installation manual

* Safety certiﬁed for AC input only

(1) Derate linearly to 60% load from 100Vac to 85Vac input

(2) Cycle AC to reset

(3) See derating curves in installation manual for all mounting orientations and models

(4) Part count method, Ground Fixed

CUT75 Series

CUT75 Open Frame Derating

Outline Drawing CUT75 (Open Frame)

CUT75 Series

Outline Drawing CUT75/T (Open Frame, Screw Terminals)

Outline Drawing CUT75 /A (Enclosed)

CUT75 Series

TDK-Lambda France SAS

TDK-Lambda Americas

Tel: +1 800-LAMBDA-4 or 1-800-526-2324

powersolutions@us.tdk-lambda.com

www.us.lambda.tdk.com

Tel: +33 1 60 12 71 65

france@fr.tdk-lambda.com

www.emea.lambda.tdk.com/fr

Italy Sales Office

Tel: +39 02 61 29 38 63

info.italia@it.tdk-lambda.com

www.emea.lambda.tdk.com/it

TDK Electronics do Brasil Ltda

Tel: +55 11 3289-9599

sales.br@tdk-electronics.tdk.com

www.tdk-electronics.tdk.com/en

Netherlands

info@nl.tdk-lambda.com

www.emea.lambda.tdk.com/nl

TDK-Lambda Germany GmbH

Tel: +49 7841 666 0

info@de.tdk-lambda.com

TDK-Lambda Corporation

Tel: +81-3-6778-1113

www.jp.lambda.tdk.com

www.emea.lambda.tdk.com/de

TDK-Lambda (China) Electronics Co. Ltd.

Tel: +86 21 6485-0777

powersolutions@cn.tdk-lambda.com

www.lambda.tdk.com.cn

TDK-Lambda Singapore Pte Ltd.

Tel: +65 6251 7211

tls.mkt@sg.tdk-lambda.com

www.sg.lambda.tdk.com

Austria Sales Office

Tel: +43 2256 655 84

info@at.tdk-lambda.com

www.emea.lambda.tdk.com/at

TDK India Private Limited, Power Supply Division

Switzerland Sales Office

Tel: +41 44 850 53 53

info@ch.tdk-lambda.com

www.emea.lambda.tdk.com/ch

Tel: +91 80 4039-0660

mathew.philip@in.tdk-lambda.com

www.sg.lambda.tdk.com

Nordic Sales Office

Tel: +45 8853 8086

info@dk.tdk-lambda.com

www.emea.lambda.tdk.com/dk

TDK-Lambda UK Ltd.

Tel: +44 (0) 12 71 85 66 66

info@uk.tdk-lambda.com

www.emea.lambda.tdk.com/uk

TDK-Lambda Ltd.

Tel: +9 723 902 4333

info@tdk-lambda.co.il

www.emea.lambda.tdk.com/il

C.I.S.

Commercial Support:

Tel: +7 (495) 665 2627

Technical Support:

Tel: +7 (812) 658 0463

info@tdk-lambda.ru

www.emea.lambda.tdk.com/ru

For Additional Information, please visit

https://product.tdk.com/en/power/

CUT75-260862 February 10th, 2022 V1

CUT75 Series

相关型号：