IHD24008A280V-006 [TDK]
DC-DC Regulated Power Supply Module, 1 Output, 225W, Hybrid;
| 型号： | IHD24008A280V-006 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | DC-DC Regulated Power Supply Module, 1 Output, 225W, Hybrid |
| 文件： | 总6页 (文件大小：73K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
(1/6)
DC to DC Converters
Distributed Power Supplies for Systems, Insulation Type
Half Brick Type iHA/iHD Series
Power supply systems for infrastructure devices used in communi-
cation networks primarily use brick-type DC to DC converters.
As the voltage used for LSIs continues to drop, power supplies are
expected to provide lower output, higher efficiencies, and lower
noise levels. Moreover, the high-power is needed in the mid output
voltage such as RF lamps.
To meet these demands, we have developed half brick types with
low output voltage.
FEATURES
• Wide input voltage range (DC.36 to 75V)
• There are 19 models in the lineup of products with low to
medium output voltages.
• High efficiency: 92%(5V and 28V output)
• Heat sink is not required.
• Remote ON-OFF function
• Output voltage external variable function
• Remote sensing function
• Various protective functions
• Parallel operations are available only for iHD type
PRODUCT IDENTIFICATION
iHA 48 060A 012V
(1) (2) (3) (4)
PART NUMBERS AND RATINGS
Output voltage(V)
Current(A)
Part No.
-
Low output voltage type
(5)
1.2
1.5
1.8
2.5
3.3
3.3
5
60
60
60
60
40
60
40
iHA48060A012V
iHA48060A015V
iHA48060A018V
iHA48060A025V
iHA48040A033V
iHA48060A033V
iHA48040A050V
(1) Type name
iHA/iHD: Half brick type
(2) Rated input voltage
(3) Output current
(4) Output voltage
Low output voltage type(supports parallel operations)
(5) Option code
1.2
1.5
1.8
2.5
3.3
5
60
60
60
60
60
40
iHD48060A012V
iHD48060A015V
iHD48060A018V
iHD48060A025V
iHD48060A033V
iHD48040A050V
001: Standard(Negative on/off logic, Pin length: 3.68mm,
Shutdown type OVP)
000: Positive on/off logic, Pin length: 3.68mm,
Shutdown type OVP
002: Positive on/off logic, Pin length: 3.68mm,
Automatic recovery type OVP
Mid output voltage type
12
24
28
28
25
12.5
11
8
iHA48025A120V
iHA48013A240V
iHA48011A280V
003: Negative on/off logic, Pin length: 3.68mm,
Automatic recovery type OVP
iHA24008A280V(24V input)
004: Positive on/off logic, Pin length: 2.79mm,
Shutdown type OVP
Mid output voltage type(supports parallel operations)
12
24
28
28
25
12.5
11
8
iHD48025A120V
iHD48013A240V
iHD48011A280V
iHD24008A280V(24V input)
005: Negative on/off logic, Pin length: 2.79mm,
Shutdown type OVP
006: Positive on/off logic, Pin length: 2.79mm,
Automatic recovery type OVP
007: Negative on/off logic, Pin length: 2.79mm,
Automatic recovery type OVP
• All specifications are subject to change without notice.
002-02 / 20040525 / ea33_br_ihad.
(2/6)
SPECIFICATIONS AND STANDARDS
General use
Supports parallel operations iHD48060A012V
Rated output voltage and current
Maximum output power
Input conditions
Input voltage Edc
Input current
iHA48060A012V
iHA48060A015V
iHD48060A015V
1.5V • 60A
90
iHA48060A018V
iHD48060A018V
1.8V • 60A
108
iHA48060A025V
iHD48060A025V
2.5V • 60A
150
iHA48040A033V
iHA48060A033V
iHD48060A033V
3.3V • 60A
200
iHA48040A050V
Part No.
iHD48040A050V
5.0V • 40A
200
1
1.2V • 60A
72
3.3V • 40A
132
W
V
A
36 to 75[Continuation]/100[Transient 100ms]
2.6max.
A2S 0.02max.
3.2max.
0.02max.
86typ.
3.7max.
0.02max.
86.5typ.
5.2max.
0.02max.
89typ.
4.5max.
0.02max.
90typ.
6.2max.
0.02max.
90typ.
6.8max.
0.02max.
92typ.
2
Inrush transient
Efficiency
%
83typ.
Output characteristics
Output voltage Edc
V
1.2
1.5
1.8
2.5
3.3
3.3
5
Voltage adjustment range
Maximum output current
Minimum output current
Output voltage initial setting
Overvoltage protection
Overcurrent protection
Line regulation
%
A
A
%
V
A
–46 to +10
60
0
–46 to +10
60
0
–46 to +10
60
0
–46 to +10
60
0
–46 to +10
40
0
1.6max.
4.4typ.
46typ.
6max.(2typ.)
–46 to +10
60
0
1.6max.
4.4typ.
66typ.
6max.(2typ.)
–46 to +10
40
0
1.6max.
6.0typ.
46typ.
8max.(2typ.)
1.7max.
1.65typ.
76typ.
2max.(1typ.)
6max.(4typ.)
15max.
(10typ.)
35typ.
1.7max.
2.0typ.
72typ.
4max.(2typ.)
6max.(4typ.)
30max.
(10typ.)
100typ.
50typ.
1.7max.
2.2typ.
71typ.
4max.(2typ.)
6max.(4typ.)
30max.
(10typ.)
100typ.
50typ.
1.6max.
3.2typ.
68typ.
5max.(2typ.)
8max.(4typ.)
30max.
(10typ.)
100typ.
50typ.
mV
mV
Load regulation
10max.(6typ.) 10max.(6typ.) 10max.(4typ.)
Voltage
Temperature
stability
30max.
(10typ.)
110typ.
60typ.
30max.
(10typ.)
110typ.
50typ.
40max.
(15typ.)
150typ.
150typ.
70typ.
mV
regulation
3
Dynamic response
Ripple noise Ep-p
Start up time
mV
mV
ms
40typ.
32typ.
70typ.
70typ.
70typ.
70typ.
70typ.
Auxiliary functions
Overvoltage protection
Overcurrent protection
Alarm output
Yes(Shut-down type: Models capable of automatic output voltage recovery are available as an option.)
Yes(Automatic recovery)
No
Over-temperature protection
Remote ON-OFF
Remote sensing
Yes(Automatic recovery)
Yes
Yes
Parallel operation
Output voltage adjustment
Master slave operation
Standards
Impossible
Yes
No
Safety standards
Constructions
UL60950 and VDE0805 approved. EN60950 approved.
External dimensions
Weight
mm 12.7×57.9×61.0[H×W×L]
g
25typ.
Mounting method
Oscillating method
Oscillating frequency
Mounted from the terminal side (soldered).
Fixed frequency
kHz 300typ.[1.2V and 1.5V output: 240kHz]
1 Verify the rated current (maximum output current) because this involves derating.
2 Applies only to the primary surge. The power supply does not have an input fuse, so make sure to install an external fuse when using this product.
3 Load step from 50 to 75% of Io max.
• All specifications are subject to change without notice.
002-02 / 20040525 / ea33_br_ihad.
(3/6)
SPECIFICATIONS AND STANDARDS
General use
Supports parallel operations
Rated output voltage and current
Maximum output power
Input conditions
Input voltage Edc
Input current
iHA48025A120V
iHA48013A240V
iHD48013A240V
24V • 12.5A
300
iHA48011A280V
iHD48011A280V
28V • 11A
iHA24008A280V
iHD24008A280V
28V • 8A
Part No.
iHD48025A120V
12V • 25A
300
1
W
308
225
V
A
36 to 75[Continuation]/100[Transient 100ms]
10.2max.
0.02max.
92typ.
10.2max.
0.02max.
91typ.
10.2max.
0.02max.
92typ.
15max.
0.02max.
92typ.
Inrush transient
A2S
%
2
Efficiency
Output characteristics
Output voltage Edc
V
12
24
28
28
Voltage adjustment range
Maximum output current
Minimum output current
Output voltage initial setting
Overvoltage protection
Overcurrent protection
Line regulation
%
A
A
%
V
A
–46 to +10
25
0
1.7max.
14typ.
31typ.
–46 to +10
12.5
0
1.7max.
29typ.
15.2typ.
25max.(10typ.)
50max.(10typ.)
–46 to +10
11
0
1.8max.
33.5typ.
13.6typ.
30max.(10typ.)
50max.(10typ.)
–46 to +10
8
0.8
1.8max.
33.0typ.
10.1typ.
30max.(10typ.)
50max.(10typ.)
mV
mV
15max.(5typ.)
25max.(10typ.)
Load regulation
Temperature
stability
Voltage
mV
100max.(40typ.)
200max.(75typ.)
200max.(85typ.)
200max.(85typ.)
regulation
3
Dynamic response
Ripple noise Ep-p
Start up time
mV
mV
ms
250typ.
150typ.
70typ.
500typ.
350typ.
40typ.
500typ.
350typ.
70typ.
500typ.
250typ.
60typ.
Auxiliary functions
Overvoltage protection
Overcurrent protection
Alarm output
Yes(Shut-down type: Models capable of automatic output voltage recovery are available as an option.)
Yes(Automatic recovery)
No
Over-temperature protection
Remote ON-OFF
Remote sensing
Yes(Automatic recovery)
Yes
Yes
Parallel operation
Output voltage adjustment
Master slave operation
Standards
Impossible
Yes
No
Safety standards
Constructions
UL60950 and VDE0805 approved. EN60950 approved.
External dimensions
Weight
mm
g
12.7×57.9×61.0[H×W×L]
25typ.
Mounting method
Oscillating method
Oscillating frequency
Mounted from the terminal side (soldered).
Fixed frequency
300typ.[1.2V and 1.5V output: 240kHz]
kHz
1 Verify the rated current (maximum output current) because this involves derating.
2 Applies only to the primary surge. The power supply does not have an input fuse, so make sure to install an external fuse when using this product.
3 Load step from 50 to 75% of Io max. with 200µF external capacitor.
• All specifications are subject to change without notice.
002-02 / 20040525 / ea33_br_ihad.
(4/6)
SHAPES AND DIMENSIONS
Bottom view
57.9
4.8
48.26
M3×0.5
Threaded inserts
4 places
ø1.02
7 pins
ø2.03
2 pins
TERMINAL DESIGNATIONS AND FUNCTIONS
Top view
57.9
4.8
48.26
1
2
9
8
7
6
3
4
5
Dimensions in mm
1
2
3
4
5
6
7
8
9
+Vin
On/Off
Case
DC input terminal (+)
The output can be turned on/off externally.
Do not connect anything.
DC input terminal (–)
DC output terminal (–)
Remote sensing terminal (–)
The output voltage can be varied by an external resistor.
Remote sensing terminal (+)
DC output terminal (+)
–Vin
–Vout
–Sense
Trim
+Sense
+Vout
• All specifications are subject to change without notice.
002-02 / 20040525 / ea33_br_ihad.
(5/6)
OUTPUT POWER-AMBIENT TEMPERATURE (DERATING)
MAXIMUM OUTPUT CURRENT vs. AMBIENT TEMPERATURE(Ta)
iHA48060A012V/iHD48060A012V
iHA48060A015V/iHD48060A015V
Wind direction: From output side to input side, Vin=48V
Wind direction: From output side to input side, Vin=48V
60
60
50
40
50
40
(
)
NC
NC 0.3m/s, 60LFM
(
)
)
(
)
)
1.0m/s 200LFM
1.0m/s 200LFM
2.0m/s 400LFM
(
(
2.0m/s 400LFM
30
20
30
20
30
40
50
60
70
)
80
90
30
40
50
60
70
)
80
90
(
(
Ambient temperature ˚C
Ambient temperature ˚C
iHA48060A018V/iHD48060A018V
iHA48060A025V/iHD48060A025V
Wind direction: From output side to input side, Vin=48V
Wind direction: From output side to input side, Vin=48V
60
60
50
40
50
40
30
NC
NC
(
)
)
(
1.0m/s 200LFM
)
)
1.0m/s 200LFM
(
(
2.0m/s 400LFM
30 40
Ambient temperature ˚C
2.0m/s 400LFM
30 40
Ambient temperature ˚C
30
20
20
20
50
60
70
)
80
90
50
60
70
)
80
90
(
(
iHA48060A033V/iHD48060A033V
iHA48040A050V/iHD48040A050V
Wind direction: From output side to input side, Vin=48V
Wind direction: From output side to input side, Vin=48V
40
60
50
40
30
30
20
(
)
NC 0.3m/s, 60LFM
(
)
)
1.0m/s 200LFM
2.0m/s 400LFM
(
10
20
20
30 40
50
60
70
)
80
90
20 30 40 50 60 70 80 90 100 110 120
(
(
)
Ambient temperature ˚C
Ambient temperature ˚C
(
2.0m/s 400LFM
)
)
NC
0.5m/s 100LFM
(
)
)
)
(
3.0m/s 600LFM
(
(
)
)
1.0m/s 200LFM
IMS LIMIT 1.3m/s 250LFM
(
(
IMS LIMIT 1.3m/s 250LFM
1.5m/s 300LFM
• All specifications are subject to change without notice.
002-02 / 20040525 / ea33_br_ihad.
(6/6)
OUTPUT POWER-AMBIENT TEMPERATURE (DERATING)
MAXIMUM OUTPUT CURRENT vs. AMBIENT TEMPERATURE(Ta)
Wind direction: From output side to input side, Vin=48V
Wind direction: From output side to input side, Vin=48V
12
12.5
10.5
8.5
10
8
6.5
6
4.5
4
,
)
NC(0.3m/s 60LFM
(
)
)
)
0.5m/s 100LFM
2.5
2
(
)
NC 0.3m/s, 60LFM
(
(
1.0m/s 200LFM
(
)
)
1.0m/s 200LFM
2.0m/s 400LFM
(
2.0m/s 400LFM
30 40
Ambient temperature ˚C
0.5
0
20
50
60
70
)
80
90
20
30 40
50
)
Ambient temperature ˚C
60
70
80
90
(
(
iHA24008A280V/iHD24008A280V
Wind direction: From output side to input side, Vin=24V
8
7
6
5
4
3
(
)
NC 0.3m/s, 60LFM
(
)
)
1.0m/s 200LFM
(
2.0m/s 400LFM
30 40
Ambient temperature ˚C
2
20
50
60
70
)
80
90
(
COMMON SPECIFICATIONS
Temperature and humidity
Operating(°C)
Storage(°C)
–40 to +115[12, 24 and 28V outputs: –40 to +110]
–55 to +125[Ambient temperature of the power supply]
Temperature range
Operating(%)RH
Storage(%)RH
Humidity range
Vibration and shock
Vibration
10 to 85[Without dewing]
5 to 10Hz
Acceleration: 0.5G
Acceleration: 1.5G
50G[Half sine wave, 3 directions]
6ms
10 to 200Hz
Acceleration
Pulse duration
Shock
Withstand voltage
Withstand voltage
Input terminal to output terminal
DC.1.5kV[1min, Normal temperature, normal humidity, cutout current 10mA]
• All specifications are subject to change without notice.
002-02 / 20040525 / ea33_br_ihad.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明