IIM-42352 [TDK]
加速度传感器;型号: | IIM-42352 |
厂家: | TDK ELECTRONICS |
描述: | 加速度传感器 传感器 |
文件: | 总1页 (文件大小:290K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IIM-42352 Product Brief
High-performance 3-Axis SmartIndustrial Accelerometer
MEMS Device for Industrial Applications
GENERAL DESCRIPTION
APPLICATIONS
The IIM-42352 is a 3-axis accelerometer packaged in
a small 2.5 mm x 3 mm x 0.91 mm (14-pin LGA)
package.
•
•
•
•
•
Vibration measurement
Predictive maintenance
Tilt sensing
Platform stabilization
Robotics
The IIM-42352 includes multiple capabilities to
enable easy, robust and accurate inertial and
vibration measurements in Industrial applications:
FEATURES
•
Wide and flat frequency response range:
from dc to 4 kHz (±3 dB point)
Low noise: 70 µg/√Hz
Low power: 0.3 mA with all 3-axes
delivering full performance
Output data rate up to 32 kHz
Highly accurate external clock input to
increase ODR accuracy, reduce system level
sensitivity error, and improve measurement
impacts from device to device variation.
2K-byte FIFO that can lower the traffic on
the serial bus interface and reduce power
consumption by allowing the system
processor to burst read sensor data and
then go into a low-power mode
•
Digital-output X-, Y-, and Z-axis
accelerometer with programmable full-
scale range of ±2g, ±4g, ±8g and ±16g
User-programmable interrupts
I3CSM / I2C / SPI slave host interface
Digital-output temperature sensor
External clock input supports highly
accurate clock input from 31 kHz to 50 kHz
Small and thin package:
2.5 mm x 3 mm x 0.91 mm (14-pin LGA)
20,000g shock tolerant
MEMS structure hermetically sealed and
bonded at wafer level
RoHS and Green compliant
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Wake-on-motion interrupt for low power
operation of applications processor
Operating temperature range: -40°C to
105°C
TYPICAL OPERATING CIRCUIT
AP_CS
The host interface can be configured to support
I3CSM slave, I2C slave, or SPI slave modes. The I3CSM
interface supports speeds up to 12.5 MHz (data rates
up to 12.5 Mbps in SDR mode, 25 Mbps in DDR
mode), the I2C interface supports speeds up to 1
MHz, and the SPI interface supports speeds up to
24 MHz.
14
13
12
AP_SDO
RESV
RESV
11
1
2
10 RESV
IIM-42352
INT2 / FSYNC
/ CLKIN
RESV
3
4
9
8
1.71 – 3.6VDC
INT1 / INT
VDD
The device features an operating voltage range from
3.6V down to 1.71V.
5
6
7
C1, 0.1 µF
C2, 2.2 µF
ORDERING INFORMATION
1.71 – 3.6VDC
PART NUMBER
TEMPERATURE
PACKAGE
C3, 10 nF
IIM-42352†
−40°C to +105°C
14-pin LGA
†Denotes RoHS and Green-compliant package
Application Schematic (SPI Interface to Host)
InvenSense, Inc. reserves the right to change
specifications and information herein without
notice unless the product is in mass
production and the product brief has been
designated by InvenSense in writing as subject
to a specified Product / Process Change
Notification Method regulation.
InvenSense, a TDK Group Company
1745 Technology Drive, San Jose, CA 95110 U.S.A
Document Number: PB-000091
Revision: 1.0
Release Date: 01/04/2021
+1(408) 988–7339
invensense.tdk.com
相关型号:
©2020 ICPDF网 联系我们和版权申明