MEM1608P50R0T001 [TDK]
3端子滤波器;
| 型号： | MEM1608P50R0T001 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | 3端子滤波器 |
| 文件： | 总7页 (文件大小：96K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
September 2015
3-terminal Filters
For signal line
MEM Series
MEM1608P Type
MEM1608P
1608[0603 inch]*
* Dimensions Code JIS[EIA]
(2/7)
E M C C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150908 / 3tf_commercial_signal_mem1608p_en.
(3/7)
E M C C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
3-terminal Filters
For signal line
Compatible with lead-free solders
Overview of MEM1608P Type
FEATURES
Multilayer chip EMC filter.
Monolithic structure makes it highly reliable.
Closed magnetic circuit structure makes it possible to achieve high-density mounting without crosstalk.
Has sharp attenuation characteristics with excellent EMC suppression.
Wide range of products compatible with passing frequencies and attenuating frequencies.
ꢀ type circuit is used.
Compact with a low profile design.
APPLICATION
Noise removal from signal lines of data terminals, digital cameras, computers, game machines, flat TVs, etc.
PART NUMBER CONSTRUCTION
MEM
1608
P
25R0
T
001
L×W×T Dimensions
(mm)
Cutoff frequency
(MHz)
Product internal
Series name
Packaging style
Internal code
code
1608
1.6×0.8×0.6
P
25R0
35R0
25
35
T
Taping
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
ꢁ
(pieces/reel)
（°C）
（°C）
（mg）
MEM1608P
–40 to +85
–40 to +85
4,000
3.5
ꢁꢂ
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150908 / 3tf_commercial_signal_mem1608p_en.
(4/7)
E M C C o m p o n e n t s
MEM1608P Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s max.
T2
180°C
150°C
230°C
250 to 260°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150908 / 3tf_commercial_signal_mem1608p_en.
(5/7)
E M C C o m p o n e n t s
MEM1608P Type
SHAPE & DIMENSIONS
1.6 0.1
GND
4
1
2
GND
3
IN/OUT
OUT/IN
0.225min. 0.225min.
Dimensions in mm
0.3 0.1
0.25 0.1
0.3 0.1
RECOMMENDED LAND PATTERN
CIRCUIT DIAGRAM
0.1
GND
0.3
0.9
2.0
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150908 / 3tf_commercial_signal_mem1608p_en.
(6/7)
E M C C o m p o n e n t s
MEM1608P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Cutoff frequency
Insertion loss
Rated voltage
Rated current
Part No.
(MHz)
25
35
50
75
(dB)
(V)max.
10
10
10
10
(mA)max.
100
100
100
100
20[70MHz to 2GHz]
20[90MHz to 2GHz]
20[200MHz to 2GHz]
20[300MHz to 2GHz]
20[400MHz to 2GHz]
MEM1608P25R0T001
MEM1608P35R0T001
MEM1608P50R0T001
MEM1608P75R0T001
MEM1608P101RT001
100
10
100
○ Measurement equipment
Measurement item
Frequency characteristics
Product No.
N5230C
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
10
20
30
35R0
25R0
40
50R0
75R0
50
60
70
80
90
101R
1
10
100
1000
10000
(
)
Frequency MHz
○ Measurement equipment
Product No.
Manufacturer
N5230C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150908 / 3tf_commercial_signal_mem1608p_en.
(7/7)
E M C C o m p o n e n t s
MEM1608P Type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
1.0
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
2.0 0.05
4.0 0.1
1.50+0.1
A
4.0 0.1
K
Dimensions in mm
B K
Type
A
MEM1608P
1.10 0.20 1.90 0.20 0.90max.
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150908 / 3tf_commercial_signal_mem1608p_en.
相关型号：
MEM1608P75R0T
Data Line Filter, 1 Function(s), 10V, 0.1A, HALOGEN FREE AND ROHS COMPLIANT, SMD, 3 PIN
TDK
MEM2012F101RT
Data Line Filter, 1 Function(s), 12V, 0.2A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 4 PIN
TDK
MEM2012F10R0T
Data Line Filter, 1 Function(s), 12V, 0.2A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 4 PIN
TDK
©2020 ICPDF网 联系我们和版权申明