MEM2012F101RT [TDK]

Data Line Filter, 1 Function(s), 12V, 0.2A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 4 PIN;


型号：	MEM2012F101RT
厂家：	TDK ELECTRONICS
描述：	Data Line Filter, 1 Function(s), 12V, 0.2A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 4 PIN LTE
文件：	总7页 (文件大小：109K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

E M C C o m p o n e n t s

September 2015

3-terminal Filters

For signal line

MEM Series

MEM2012F Type

MEM2012F

2012[0805 inch]*

* Dimensions Code JIS[EIA]

(2/7)

E M C C o m p o n e n t s

REMINDERS FOR USING THESE PRODUCTS

Before using these products, be sure to request the delivery specifications.

SAFETY REMINDERS

Please pay sufficient attention to the warnings for safe designing when using these products.

REMINDERS

The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH

or less).

If the storage period elapses, the soldering of the terminal electrodes may deteriorate.

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).

Before soldering, be sure to preheat components.

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature

does not exceed 150°C.

Soldering corrections after mounting should be within the range of the conditions determined in the specifications.

If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.

When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to

the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.

Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal

design.

Carefully lay out the coil for the circuit board design of the non-magnetic shield type.

A malfunction may occur due to magnetic interference.

Use a wrist band to discharge static electricity in your body through the grounding wire.

Do not expose the products to magnets or magnetic fields.

Do not use for a purpose outside of the contents regulated in the delivery specifications.

The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications

equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement

equipment, industrial robots) under a normal operation and use condition.

The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or

quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to

society, person or property.

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions

set forth in the each catalog, please contact us.

(1) Aerospace/Aviation equipment

(2) Transportation equipment (cars, electric trains, ships, etc.)

(3) Medical equipment

(8) Public information-processing equipment

(9) Military equipment

(10) Electric heating apparatus, burning equipment

(11) Disaster prevention/crime prevention equipment

(12) Safety equipment

(4) Power-generation control equipment

(5) Atomic energy-related equipment

(6) Seabed equipment

(13) Other applications that are not considered general-purpose

applications

(7) Transportation control equipment

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing

protection circuit/device or providing backup circuits in your equipment.

20150908 / 3tf_commercial_signal_mem2012f_en.fm

(3/7)

E M C C o m p o n e n t s

Product compatible with RoHS directive

Halogen-free

3-terminal Filters

For signal line

Compatible with lead-free solders

Overview of MEM2012F Type

FEATURES

Multilayer chip EMC filter.

Monolithic structure makes it highly reliable.

Closed magnetic circuit structure makes it possible to achieve high-density mounting without crosstalk.

Has sharp attenuation characteristics with excellent EMC suppression.

Wide range of products compatible with passing frequencies and attenuating frequencies.

ꢀ type circuit is used.

APPLICATION

Noise removal from signal lines of data terminals, digital cameras, computers, game machines, flat TVs, etc.

PART NUMBER CONSTRUCTION

MEM

2012

10R0

001

L×W×T Dimensions

(mm)

Cutoff frequency

(MHz)

Product internal

Series name

Packaging style

Internal code

code

2012

2.0×1.25×0.85

10R0

25R0

Taping

OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT

Temperature range

Package quantity

Individual weight

Operating

temperature

Storage

temperature

Type

ꢁ

(pieces/reel)

（°C）

（mg）

MEM2012F

–40 to +85

4,000

ꢁꢂ

The Storage temperature range is for after the circuit board is mounted.

RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/

Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

20150908 / 3tf_commercial_signal_mem2012f_en.fm

(4/7)

E M C C o m p o n e n t s

MEM2012F Type

RECOMMENDED REFLOW PROFILE

Preheating

Soldering

Natural

cooling

Peak

t: Time

Preheating

Temp.

Soldering

Temp.

Peak

Temp.

Time

60 to 120s

Time

30 to 60s

Time

10s max.

180°C

150°C

230°C

250 to 260°C

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

20150908 / 3tf_commercial_signal_mem2012f_en.fm

(5/7)

E M C C o m p o n e n t s

MEM2012F Type

SHAPE & DIMENSIONS

2 0.2

GND

IN/OUT

OUT/IN

0.2min

0.4 0.15 0.4 0.15 0.4 0.15

Dimensions in mm

RECOMMENDED LAND PATTERN

CIRCUIT DIAGRAM

GND

0.4

1.4

1.6

Dimensions in mm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

20150908 / 3tf_commercial_signal_mem2012f_en.fm

(6/7)

E M C C o m p o n e n t s

MEM2012F Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

Cutoff frequency

Insertion loss

Rated voltage

Rated current

Part No.

(MHz)

(dB)

(V)max.

(mA)max.

200

20 [200MHz to 2GHz]

20 [300MHz to 2GHz]

20 [400MHz to 2GHz]

20 [700MHz to 2GHz]

20 [1.5GHz to 2GHz]

MEM2012F10R0T001

MEM2012F25R0T001

MEM2012F50R0T001

MEM2012F75R0T001

MEM2012F101RT001

100

200

○ Measurement equipment

Measurement item

Frequency characteristics

Product No.

N5230C

Manufacturer

Agilent Technologies

＊ Equivalent measurement equipment may be used.

INSERTION LOSS VS. FREQUENCY CHARACTERISTICS

25R0

50R0

75R0

101R

10R0

100

1000

10000

(

)

Frequency MHz

○ Measurement equipment

Product No.

Manufacturer

N5230C

Agilent Technologies

＊ Equivalent measurement equipment may be used.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

20150908 / 3tf_commercial_signal_mem2012f_en.fm

(7/7)

E M C C o m p o n e n t s

MEM2012F Type

PACKAGING STYLE

REEL DIMENSIONS

2.0 0.5

1.0

+2.0

–0.0

8.4

ø13 0.2

ø21 0.8

14.4max.

ø180 2.0

Dimensions in mm

TAPE DIMENSIONS

2.0 0.05

4.0 0.1

1.5₀^+0.1

4.0 0.1

Dimensions in mm

B K

Type

MEM2012F

1.55 0.20 2.30 0.20 1.10max.

160min.

Taping

200min.

300min.

Drawing direction

Dimensions in mm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

20150908 / 3tf_commercial_signal_mem2012f_en.fm

相关型号：