首页 |元器件品牌

MLF2012A47NJT000 [TDK]

Multilayer Ferrite;
MLF2012A47NJT000
型号： MLF2012A47NJT000
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

Multilayer Ferrite
文件： 总11页 (文件大小：178K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
I
N
D
U
C
T
O
R
S
March 2015  
Inductors for Standard Circuits  
Multilayer Ferrite  
MLF Series  
MLF2012 Type  
MLF2012  
2012 [0805 inch]*  
* Dimensions Code JIS[EIA]  
(2/11)  
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS  
Before using these products, be sure to request the delivery specifications.  
SAFETY REMINDERS  
Please pay sufficient attention to the warnings for safe designing when using these products.  
REMINDERS  
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH  
or less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
Before soldering, be sure to preheat components.  
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature  
does not exceed 150°C.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.  
A malfunction may occur due to magnetic interference.  
Use a wrist band to discharge static electricity in your body through the grounding wire.  
Do not expose the products to magnets or magnetic fields.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications  
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement  
equipment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or  
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to  
society, person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/Aviation equipment  
(2) Transportation equipment (cars, electric trains, ships, etc.)  
(3) Medical equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipment  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing  
protection circuit/device or providing backup circuits in your equipment.  
20150310 / inductor_commercial_standard_mlf2012_en.
(3/11)  
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive  
Halogen-free  
Inductors for Standard Circuits  
Multilayer Ferrite  
Compatible with lead-free solders  
Overview of MLF2012 Type  
FEATURES  
The lineup includes a wide inductance range.  
Highly reliable monolithic structure with multilayer integration.  
APPLICATION  
Smart phones, tablet terminals, tuners, LCD-TVs, PDP-TVs, audio equipment, computers, signal processing for modules etc.  
PART NUMBER CONSTRUCTION  
MLF  
2012  
D
47N  
T
000  
△
L×W×H Dimensions  
(mm)  
Inductance  
(μH)  
Inductance  
tolerance  
Series name  
characteristics  
Packaging style Internal code  
Taping 000  
2.0×1.25×0.85  
A
C
D
E
K
J
5%  
T
0.010  
(10nH)  
2012  
10N  
2.0×1.25×1.25  
K
M
10%  
20%  
R10  
1R0  
100  
0.1  
1
10  
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
ꢀ
Temperature range  
Package quantity  
Individual weight  
Operating  
temperature  
（°C）  
Storage  
temperature  
（°C）  
Type  
ꢀꢀ  
(pieces/reel)  
4,000  
（mg）  
10  
t=0.85  
t=1.25  
MLF2012  
–55 to +125  
–55 to +125  
2,000  
14  
ꢀꢁ  
In case the product's inductance is 15μH or higher, both Operating and Storage temperature ranges are –40 to +85°C.  
ꢀꢀꢁ  
The Storage temperature range is for after the circuit board is mounted.  
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/  
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(4/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
Time  
t2  
Time  
t3  
T2  
150°C  
180°C  
60 to 120s  
230°C  
30 to 60s  
250 to 260°C 10s max.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(5/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
SHAPE & DIMENSIONS  
0.50 0.30  
0.50 0.30  
2.00 0.20  
T
0.85 0.20  
1.25 0.20  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.8  
1.0  
0.8  
Dimensions in mm  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(6/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Part No.ꢀ  
L
Q
L, Q measuring  
conditions  
Self-resonant  
frequency  
DC resistance  
Rated  
current  
Thickness  
Frequency Current  
T
(μH)  
Tolerance  
min. typ. (MHz)  
(mA)  
(MHz) (MHz) (ꢀ)  
(ꢀ)  
(mA)  
max.  
300  
300  
300  
300  
300  
300  
300  
250  
250  
250  
200  
200  
150  
150  
150  
80  
80  
80  
80  
50  
50  
50  
30  
30  
15  
15  
15  
15  
15  
5
5
5
5
5
4
4
4
2
2
2
(mm)  
min.  
550  
500  
450  
400  
360  
320  
280  
250  
220  
200  
180  
160  
150  
140  
130  
120  
110  
100  
90  
typ.  
700  
600  
550  
500  
450  
410  
370  
330  
300  
270  
250  
230  
210  
190  
170  
160  
150  
140  
130  
120  
100  
90  
max.  
0.10  
0.15  
0.15  
0.15  
0.20  
0.20  
0.25  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.65  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.65  
0.70  
0.60  
0.65  
0.70  
0.80  
0.90  
0.70  
0.80  
0.90  
1.00  
1.10  
2.40  
2.70  
2.80  
2.90  
3.00  
3.10  
typ.  
0.05  
0.08  
0.08  
0.10  
0.12  
0.13  
0.15  
0.16  
0.18  
0.23  
0.25  
0.25  
0.30  
0.35  
0.40  
0.15  
0.15  
0.18  
0.20  
0.22  
0.25  
0.28  
0.30  
0.35  
0.30  
0.32  
0.35  
0.40  
0.50  
0.35  
0.38  
0.45  
0.50  
0.55  
1.30  
1.60  
1.80  
2.00  
2.40  
2.50  
0.047 20%  
0.068 20%  
0.082 20%  
15  
15  
15  
25  
25  
25  
30  
30  
30  
30  
30  
30  
30  
35  
35  
35  
35  
35  
55  
55  
60  
60  
60  
70  
70  
70  
70  
75  
75  
75  
75  
75  
45  
45  
45  
45  
45  
55  
55  
55  
45  
45  
45  
50  
50  
50  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
10  
10  
10  
10  
10  
10  
10  
10  
10  
4
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
1.25  
1.25  
1.25  
1.25  
0.85  
0.85  
0.85  
0.85  
0.85  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
MLF2012D47N △ T000  
MLF2012D68N △ T000  
MLF2012D82N △ T000  
MLF2012DR10 △ T000  
MLF2012DR12 △ T000  
MLF2012DR15 △ T000  
MLF2012DR18 △ T000  
MLF2012DR22 △ T000  
MLF2012DR27 △ T000  
MLF2012DR33 △ T000  
MLF2012DR39 △ T000  
MLF2012DR47 △ T000  
MLF2012DR56 △ T000  
MLF2012DR68 △ T000  
MLF2012DR82 △ T000  
MLF2012A1R0 △ T000  
MLF2012A1R2 △ T000  
MLF2012A1R5 △ T000  
MLF2012A1R8 △ T000  
MLF2012A2R2 △ T000  
MLF2012A2R7 △ T000  
MLF2012A3R3 △ T000  
MLF2012A3R9 △ T000  
MLF2012A4R7 △ T000  
MLF2012E5R6 △ T000  
MLF2012E6R8 △ T000  
MLF2012E8R2 △ T000  
MLF2012E100 △ T000  
MLF2012E120 △ T000  
MLF2012C150 △ T000  
MLF2012C180 △ T000  
MLF2012C220 △ T000  
MLF2012C270 △ T000  
MLF2012C330 △ T000  
MLF2012K390 △ T000  
MLF2012K470 △ T000  
MLF2012K560 △ T000  
MLF2012C680 △ T000  
MLF2012C820 △ T000  
MLF2012C101 △ T000  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5% 10% 20% 20  
5% 10% 20% 20  
5% 10% 20% 20  
5% 10% 20% 20  
5% 10% 20% 20  
5% 10% 20% 20  
5% 10% 20% 20  
5% 10% 20% 25  
5% 10% 20% 25  
5% 10% 20% 25  
5% 10% 20% 25  
5% 10% 20% 25  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 45  
5% 10% 20% 50  
5% 10% 20% 50  
5% 10% 20% 50  
5% 10% 20% 50  
5% 10% 20% 50  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
10% 20%  
80  
70  
60  
55  
80  
50  
70  
5.6  
6.8  
8.2  
10  
45  
65  
4
4
2
2
40  
60  
35  
55  
30  
50  
12  
15  
18  
22  
27  
33  
39  
47  
56  
68  
82  
100  
ꢀꢁ  
25  
45  
30  
30  
30  
30  
30  
35  
35  
35  
25  
25  
25  
1
1
1
1
22  
40  
20  
38  
18  
35  
17  
33  
0.4  
15  
28  
2
2
2
1
1
1
13  
23  
11  
20  
10  
18  
9
16  
8
14  
7
12  
The " △ " of the Part Number contains the inductance tolerance code, J ( 5%), K ( 10%), or M ( 20%).  
○ Measurement equipment  
Measurement item  
L, Q  
Self-resonant frequency  
DC resistance  
Product No.  
4294A+16034G  
E4991A  
Manufacturer  
Agilent Technologies  
Agilent Technologies  
Yokogawa  
Type-7561  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(7/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
E100  
E6R8  
10  
1
A4R7  
DR68  
A3R3  
A2R2  
A1R5  
DR47  
A1R0  
DR33  
DR22  
DR15  
0.1  
0.01  
DR10  
1
10  
100  
1000  
(
)
Frequency MHz  
100  
10  
E120  
E8R2  
A1R2  
A3R9  
E5R6  
DR82  
A2R7  
A1R8  
DR56  
1
DR39  
DR27  
DR18  
0.1  
0.01  
DR12  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
E4991A+16192A  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(8/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
C101  
C680  
C820  
K560  
K470  
K390  
10  
C270  
C220  
C330  
C150  
1
C180  
0.1  
0.1  
1
10  
100  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
4294A+16034G  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(9/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
Q FREQUENCY CHARACTERISTICS GRAPH  
90  
A4R7  
80  
A3R3  
70  
A2R2  
E100  
DR22  
DR15  
A1R5  
60  
E6R8  
DR33  
50  
A1R0  
40  
30  
20  
10  
0
DR47  
DR10  
DR68  
1
10  
100  
1000  
(
)
Frequency MHz  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
A3R9  
E8R2  
E5R6  
E120  
A2R7  
DR18  
DR39  
A1R8  
A1R2  
DR12  
DR82  
DR56  
DR27  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
E4991A+16192A  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(10/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
Q FREQUENCY CHARACTERISTICS GRAPH  
90  
80  
70  
60  
K470  
C270  
C330  
50  
C180  
K560  
K390  
40  
C101  
C220  
30  
C680  
C820  
20  
10  
C150  
0
0.1  
1
10  
100  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
4294A+16034G  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.
(11/11)  
I
N
D
U
C
T
O
R
S
MLF2012 Type  
PACKAGING STYLE  
REEL DIMENSIONS  
1.0  
+2.0  
8.4  
–0.0  
2.0 0.5  
ø13 0.2  
ø21 0.8  
14.4max.  
ø180 2.0  
Dimensions in mm  
TAPE DIMENSIONS  
Type  
A
B
K
+0.1  
t=0.85  
t=1.25  
2.3 0.2  
2.3 0.2  
1.5 0.2  
1.5 0.2  
1.1 max.  
1.5 max.  
1.5  
Sprocket hole  
Cavity  
–0.0  
MLF2012  
K
B
4.0 0.1  
2.0 0.05  
2.0 0.05  
200min.  
160min.  
Taping  
300min.  
Drawing direction  
Dimensions in mm  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20150310 / inductor_commercial_standard_mlf2012_en.

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明