MLG06032N2HT [TDK]
SMD Inductors(Coils) For High Frequency(Multilayer); SMD电感器(线圈),高频(多层)型号: | MLG06032N2HT |
厂家: | TDK ELECTRONICS |
描述: | SMD Inductors(Coils) For High Frequency(Multilayer) |
文件: | 总6页 (文件大小:75K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
(1/6)
Conformity to RoHS Directive
SMD Inductors(Coils)
For High Frequency(Multilayer)
MLG Series MLG0603Q Type
FEATURES
PRODUCT IDENTIFICATION
MLG 0603 2N2
(1) (2) (3) (4) (5) (6)
• It serializes a product of acquisition inductance 0.3 to15nH. In a
product of 0.3 to 1.0nH, it realizes line up in a 0.1nH steppe.
• By the most suitable design, Q is higher than competing in a
conventional product MLG0603S type. In particular, Q in more
than 800MHz largely improved.
Q
S
T
(1) Multilayer ceramic chip coil
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
(2) Dimensions
0603
0.6× 0.3mm (L× W)
• The products contain no lead and also support lead-free
soldering.
(3) Series name
(4) Inductance value
APPLICATIONS
2N2
12N
2.2nH
12nH
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
(5) Inductance tolerance
B
C
S
H
J
0.1nH
0.2nH
0.3nH
3%
SHAPES AND DIMENSIONS
0.6 0.03
5%
(6) Packaging style
T
Taping (reel)
0.06 0.04
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C [Unit of products]
Weight: 0.2mg
PACKAGING STYLE AND QUANTITIES
0.15 0.05
Packaging style
Taping
Quantity
15000 pieces/reel
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
250 to 260˚C
230˚C
Natural
cooling
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.
(2/6)
ELECTRICAL CHARACTERISTICS
Self-resonant
frequency
(GHz)
DC resistance
(Ω)
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Rated current
(mA)max.
Part No.
min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.0
9.0
9.0
8.5
8.5
7.5
7.5
7.5
7.5
7.5
7.5
7.0
6.5
6.5
6.2
6.2
6.0
6.0
6.0
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.2
5.2
5.0
4.2
4.2
4.2
3.8
3.8
3.6
3.6
3.0
3.0
typ.
20up
20up
20up
20up
20up
17.5
16.3
14.2
14.9
14.7
13.6
12.0
10.7
11.3
10.0
10.3
8.9
9.4
8.8
9.3
10.0
9.3
9.1
8.0
7.7
7.9
7.6
7.4
7.2
7.1
7.1
7.1
6.8
7.4
7.4
7.3
7.3
7.1
6.4
6.9
6.0
5.5
max.
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.15
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.35
0.35
0.40
0.40
0.40
0.40
0.40
0.45
0.50
0.50
0.55
0.60
0.70
0.70
0.80
0.80
1.00
1.10
typ.
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
—
—
—
—
—
—
—
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.02
0.02
0.02
0.03
0.04
0.03
0.04
0.06
0.06
0.05
0.05
0.06
0.08
0.08
0.08
0.09
0.08
0.09
0.09
0.08
0.17
0.14
0.17
0.13
0.11
0.14
0.13
0.12
0.15
0.15
0.15
0.15
0.18
0.20
0.23
0.23
0.24
0.23
0.21
0.25
0.30
0.28
0.32
0.34
0.36
0.44
0.49
0.52
0.56
0.69
600
600
600
600
600
600
600
600
550
550
550
550
550
500
500
500
500
500
500
500
450
450
450
450
450
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
250
250
250
250
220
220
200
200
180
180
MLG0603Q0N3∗T
MLG0603Q0N4T
MLG0603Q0N5T
MLG0603Q0N6T
MLG0603Q0N7T
MLG0603Q0N8T
MLG0603Q0N9T
MLG0603Q1N0T
MLG0603Q1N1T
MLG0603Q1N2T
MLG0603Q1N3T
MLG0603Q1N4T
MLG0603Q1N5T
MLG0603Q1N6T
MLG0603Q1N7T
MLG0603Q1N8T
MLG0603Q1N9T
MLG0603Q2N0T
MLG0603Q2N1T
MLG0603Q2N2T
MLG0603Q2N3T
MLG0603Q2N4T
MLG0603Q2N5T
MLG0603Q2N6T
MLG0603Q2N7T
MLG0603Q2N8T
MLG0603Q2N9T
MLG0603Q3N0T
MLG0603Q3N1T
MLG0603Q3N2T
MLG0603Q3N3T
MLG0603Q3N4T
MLG0603Q3N5T
MLG0603Q3N6T
MLG0603Q3N7T
MLG0603Q3N8T
MLG0603Q3N9T
MLG0603Q4N0T
MLG0603Q4N3T
MLG0603Q4N7T
MLG0603Q5N1T
MLG0603Q5N6T
MLG0603Q6N2T
MLG0603Q6N8T
MLG0603Q7N5T
MLG0603Q8N2T
MLG0603Q9N1T
MLG0603Q10NT
MLG0603Q12NT
MLG0603Q15NT
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
3%, 0.3nH
5
5
5
5
5
5
5
5
5
5
5
5
6
6
3%, 0.3nH
3%, 0.3nH
3%, 0.3nH
3%, 0.3nH
3, 5%
3, 5%
3, 5%
3, 5%
5.3
5.5
4.8
4.9
4.4
4.7
3.8
3.8
3, 5%
3, 5%
3, 5%
12
15
∗
: Please specify inductance tolerance, B ( 0.1nH), C ( 0.2nH), S ( 0.3nH), H ( 3%) or J ( 5%).
• Test equipment
Inductance Q : HP4291A+16197A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
• Rated current : Value obtained when current flows and temperature has risen to under 20°C.
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.
(3/6)
L, Q vs. FREQUENCY CHARACTERISTICS
Inductance(nH)typ.
Part No.
Q typ.
500MHz
17
17
15
17
17
17
18
18
16
17
17
17
17
18
19
18
20
18
19
16
17
18
18
18
17
19
19
19
18
18
18
18
17
16
18
17
17
18
17
16
17
18
17
17
17
16
17
16
16
17
500MHz
0.3
0.4
0.5
0.6
0.7
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.0
2.2
2.3
2.4
2.5
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
4.1
4.4
4.9
5.3
5.9
6.4
7.1
7.8
8.7
9.5
11.5
14.3
800MHz
0.3
0.4
0.5
0.6
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.0
2.2
2.3
2.4
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
4.1
4.4
4.9
5.4
5.9
6.4
7.2
7.8
8.8
9.6
11.7
14.6
1.8GHz
0.3
0.4
0.45
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
4.0
4.3
4.6
5.1
5.7
6.4
6.9
8.1
8.5
9.9
10.8
14.3
17.4
2.0GHz
0.3
0.4
0.45
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.4
4.7
5.3
5.9
6.6
7.1
8.5
8.8
10.4
11.3
15.5
18.8
2.4GHz
0.3
0.4
0.45
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.1
2.1
2.3
2.4
2.5
2.6
2.7
2.8
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.2
4.6
4.9
5.5
6.2
7.1
7.6
9.4
9.5
11.5
12.5
18.8
22.2
800MHz
22
22
20
22
22
23
23
23
20
21
21
22
21
23
24
23
25
23
24
20
23
23
23
23
22
24
24
24
23
23
23
23
22
21
23
23
22
23
22
21
22
23
22
21
22
20
21
21
20
21
1.8GHz
36
34
31
34
35
36
36
36
32
33
33
34
33
36
38
35
40
36
37
31
36
36
35
35
33
36
36
35
34
34
34
33
32
32
34
34
33
34
32
32
32
32
31
30
29
28
27
27
24
26
2.0GHz
37
35
33
36
36
37
38
38
34
34
35
36
35
38
40
37
42
38
39
33
37
38
37
37
34
37
37
36
36
35
35
35
33
34
35
35
35
35
33
33
33
33
31
31
30
28
27
28
23
26
2.4GHz
42
39
37
39
41
42
42
43
38
39
39
41
39
42
45
41
47
42
43
36
42
42
40
40
38
41
40
39
38
38
38
37
36
37
38
38
38
38
36
36
36
35
33
33
30
29
27
28
21
24
MLG0603Q0N3
MLG0603Q0N4
MLG0603Q0N5
MLG0603Q0N6
MLG0603Q0N7
MLG0603Q0N8
MLG0603Q0N9
MLG0603Q1N0
MLG0603Q1N1
MLG0603Q1N2
MLG0603Q1N3
MLG0603Q1N4
MLG0603Q1N5
MLG0603Q1N6
MLG0603Q1N7
MLG0603Q1N8
MLG0603Q1N9
MLG0603Q2N0
MLG0603Q2N1
MLG0603Q2N2
MLG0603Q2N3
MLG0603Q2N4
MLG0603Q2N5
MLG0603Q2N6
MLG0603Q2N7
MLG0603Q2N8
MLG0603Q2N9
MLG0603Q3N0
MLG0603Q3N1
MLG0603Q3N2
MLG0603Q3N3
MLG0603Q3N4
MLG0603Q3N5
MLG0603Q3N6
MLG0603Q3N7
MLG0603Q3N8
MLG0603Q3N9
MLG0603Q4N0
MLG0603Q4N3
MLG0603Q4N7
MLG0603Q5N1
MLG0603Q5N6
MLG0603Q6N2
MLG0603Q6N8
MLG0603Q7N5
MLG0603Q8N2
MLG0603Q9N1
MLG0603Q10N
MLG0603Q12N
MLG0603Q15N
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.
(4/6)
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS
Q vs. FREQUENCY CHARACTERISTICS
50
100
1.0nH
2.7nH
40
30
20
10
0
15nH
10nH
10
10nH
2.7nH
1
1.0nH
15nH
0
10
100
Frequency MHz
1000
10000
10
100
1000
10000
(
)
(
)
Frequency MHz
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.
(5/6)
MLG Series MLG0603M Type (For Wireless LAN & Bluetooh)
FEATURES
PRODUCT IDENTIFICATION
MLG 0603 M 2N2
(1) (2) (3) (4) (5) (6)
• Nominal inductance values are supported from 0.6 to 10nH.
• Provides high Q characteristics.
B
T
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
(1) Series name
(2) Dimensions
0603
• The products contain no lead and also support lead-free
soldering.
0.6× 0.3mm (L× W)
(3) Material code
• It is a product conforming to RoHS directive.
(4) Inductance value
APPLICATIONS
2N2
5N6
2.2nH
5.6nH
The most suitable in high frequency circuit of 2.4GHz and 5GHz
wireless LAN & Bluetooh.
(5) Inductance tolerance
B
H
0.1nH
3%
SHAPES AND DIMENSIONS
0.6 0.03
(6) Packaging style
T
Taping (reel)
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C [Unit of products]
0.06 0.04
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
15000 pieces/reel
Weight: 0.2mg
0.15 0.05
Dimensions in mm
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
RECOMMENDED PC BOARD PATTERN
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
300°C. Soldering time should not exceed 3 seconds.
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
250 to 260˚C
230˚C
Natural
cooling
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.
(6/6)
PACKAGING STYLES
REEL DIMENSIONS
1.0
2.0 0.5
9.0 0.3
ø13 0.5
ø21 0.8
13.0 1.4
ø178 2.0
Dimensions in mm
TAPE DIMENSIONS
+0.1
–0.0
1.5
Sprocket hole
Cavity
0.5max.
0.38 0.05
4.0 0.1
2.0 0.05
2.0 0.05
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明