首页 |元器件品牌

MMZ2012D800BT000 [TDK]

Ferrite Chip, 1 Function(s), 0.5A,;
MMZ2012D800BT000
型号： MMZ2012D800BT000
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

Ferrite Chip, 1 Function(s), 0.5A,
文件： 总11页 (文件大小：271K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
E M C C o m p o n e n t s  
July 2016  
Chip beads  
For general signal line  
MMZ series  
MMZ2012Type  
MMZ2012  
2012[0805 inch]*  
* Dimensions code JIS[EIA]  
(2/11)  
E M C C o m p o n e n t s  
Reminders for using these products  
Before using these products, be sure to request the delivery specifications.  
Safety reminders  
Please pay sufficient attention to the warnings for safe designing when using this products.  
Reminders  
The storage period is less than 12 months.Be sure to follow the storage conditions (temperature:5 to 40°C, humidity:10 to 75% RH or  
less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
Before soldering, be sure to preheat components.  
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature  
does not exceed 150°C.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.  
A malfunction may occur due to magnetic interference.  
Use a wrist band to discharge static electricity in your body through the grounding wire.  
Do not expose the products to magnets or magnetic fields.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-  
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-  
ment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-  
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,  
person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/aviation equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(2) Transportation equipment (cars, electric trains, ships, etc.)  
(3) Medical equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipmentꢀꢀ  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-  
tection circuit/device or providing backup circuits in your equipment.  
20160722 / beads_commercial_signal_mmz2012_en.
(3/11)  
E M C C o m p o n e n t s  
Product compatible with RoHS directive  
Halogen-free  
Chip beads  
For general signal line  
Compatible with lead-free solders  
Overview of MMZ2012 type  
FEATURES  
Noise reduction solution for general signal line.  
Various frequency characteristics with 4 materials of different features for countermeasures against everything from general signals to  
high-speed signals.  
APPLICATION  
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.  
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.  
PART NUMBER CONSTRUCTION  
MMZ  
2012  
R
150  
A
T
000  
L×W×T dimensions  
(mm)  
Impedance  
() at 100MHz  
Characteristic  
Series name  
Material name  
Packaging style  
Internal code  
type  
A
B
2012  
2.0×1.25x0.85  
D
R
S
Y
121  
150  
120  
15  
T
Taping  
000  
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
Temperature ranges  
Package quantity  
Individual weight  
Operating  
temperature  
Storage  
temperature  
Type  
(pieces/reel)  
（°C）  
（°C）  
（mg）  
MMZ2012  
–55 to +125  
–55 to +125  
4,000  
8
  
The storage temperature range is for after the circuit board is mounted.  
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html  
Halogen-free: indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(4/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
60 to 120s  
Time  
t2  
30 to 60s  
Time  
t3  
10s  
T2  
180°C  
150°C  
230°C  
250 to 260°C  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(5/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
MATERIAL CHARACTERISTIC  
R material: for wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling requiring  
good waveform integrity. Impedance values selected for effectiveness at 10 to 200MHz.  
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in  
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.  
Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal  
frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz.  
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.  
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.  
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS  
2500  
2000  
Y
1500  
1000  
D
S
R
500  
0
10  
100  
1000  
Frequency(MHz)  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(6/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
SHAPE & DIMENSIONS  
2±0.2  
Dimensions in mm  
0.5±0.3  
RECOMMENDED LAND PATTERN  
0.8  
1
0.8  
Dimensions in mm  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(7/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Impedance  
DC resistance  
Rated current  
Part No.  
[100MHz]  
()  
15  
30  
60  
120  
300  
600  
1000  
40  
Tolerance  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
()max.  
0.05  
0.05  
0.10  
0.12  
0.15  
0.20  
0.30  
0.10  
0.10  
0.15  
0.15  
0.20  
0.30  
0.35  
0.05  
0.05  
0.10  
0.12  
0.15  
0.20  
0.30  
0.40  
0.50  
0.30  
0.30  
0.50  
(mA)max.  
1500  
1500  
1000  
800  
600  
500  
500  
1000  
800  
MMZ2012R150AT000  
MMZ2012R300AT000  
MMZ2012R600AT000  
MMZ2012R121AT000  
MMZ2012R301AT000  
MMZ2012R601AT000  
MMZ2012R102AT000  
MMZ2012S400AT000  
MMZ2012S800AT000  
MMZ2012S121AT000  
MMZ2012S181AT000  
MMZ2012S301AT000  
MMZ2012S601AT000  
MMZ2012S102AT000  
MMZ2012Y150BT000  
MMZ2012Y300BT000  
MMZ2012Y600BT000  
MMZ2012Y121BT000  
MMZ2012Y301BT000  
MMZ2012Y601BT000  
MMZ2012Y102BT000  
MMZ2012Y152BT000  
MMZ2012Y202BT000  
MMZ2012D800BT000  
MMZ2012D121BT000  
MMZ2012D301BT000  
80  
120  
180  
300  
600  
1000  
15  
800  
600  
600  
500  
500  
1500  
1500  
1000  
800  
600  
500  
500  
500  
400  
500  
30  
60  
120  
300  
600  
1000  
1500  
2000  
80  
120  
300  
500  
400  
○ Measurement equipment  
Measurement item  
Impedance  
Product No.  
E4991A+16192A  
Type-7556  
Manufacturer  
Keysight Technologies  
Yokogawa  
DC resistance  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(8/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
ELECTRICAL CHARACTERISTICS  
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)  
MMZ2012R series  
MMZ2012S series  
MMZ2012Y series  
1200  
1100  
1000  
900  
800  
700  
600  
500  
400  
300  
200  
100  
0
2500  
1200  
MMZ2012S102A  
MMZ2012R102A  
MMZ2012R121A  
MMZ2012Y202B  
1100  
MMZ2012S121A  
MMZ2012S800A  
MMZ2012S400A  
MMZ2012R601A  
1000  
MMZ2012S601A  
2000  
MMZ2012R301A  
MMZ2012Y152B  
MMZ2012Y600B  
MMZ2012R600A  
900  
800  
700  
600  
500  
400  
300  
200  
100  
0
MMZ2012Y102B  
MMZ2012S301A  
MMZ2012S181A  
MMZ2012Y300B  
MMZ2012R300A  
MMZ2012Y150B  
1500  
MMZ2012Y601B  
MMZ2012Y301B  
MMZ2012Y121B  
MMZ2012R150A  
1000  
500  
0
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
1
10  
100  
1000  
)
10000  
(
Frequency MHz  
(
Frequency MHz  
MMZ2012D series  
4500  
4000  
MMZ2012D301B  
3500  
3000  
2500  
2000  
1500  
1000  
500  
MMZ2012D121B  
MMZ2012D800B  
0
1
10  
100  
1000  
10000  
(
)
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(9/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
ELECTRICAL CHARACTERISTICS  
Z, X, R VS. FREQUENCY CHARACTERISTICS  
MMZ2012R150AT000  
MMZ2012R300AT000  
MMZ2012R600AT000  
25  
20  
40  
35  
30  
25  
20  
15  
10  
5
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
15  
Z
Z
Z
R
R
R
10  
5
X
X
X
0
0
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
10000  
(
(
(
)
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ2012R121AT000  
MMZ2012R301AT000  
MMZ2012R601AT000  
140  
120  
100  
350  
300  
250  
700  
600  
500  
Z
Z
80  
60  
40  
20  
0
200  
400  
Z
R
R
R
300  
150  
200  
100  
0
100  
50  
0
X
X
X
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
10000  
10000  
10000  
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
10000  
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ2012R102AT000  
MMZ2012S400AT000  
MMZ2012S800AT000  
1200  
1000  
60  
50  
140  
120  
100  
800  
600  
400  
200  
0
40  
Z
Z
Z
R
80  
R
R
30  
20  
10  
0
60  
40  
20  
0
X
X
X
1
10  
100  
1000  
)
1
10  
100  
1000  
( )  
Frequency MHz  
1
10  
100  
1000  
)
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ2012S121AT000  
MMZ2012S181AT000  
MMZ2012S301AT000  
180  
160  
140  
300  
250  
200  
450  
400  
350  
300  
120  
100  
Z
250  
200  
150  
Z
R
R
80  
60  
40  
20  
0
Z
R
100  
50  
0
150  
100  
50  
X
X
X
0
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
1
10  
100  
1000  
)
(
(
(
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ2012S601AT000  
MMZ2012S102AT000  
MMZ2012Y150BT000  
700  
600  
500  
1200  
1000  
800  
30  
25  
20  
15  
10  
5
Z
Z
Z
400  
R
R
600  
400  
200  
0
R
300  
200  
100  
0
X
X
X
0
1
10  
100  
1000  
10000  
1
10  
100  
1000  
1
10  
100  
1000  
10000  
(
)
(
)
(
)
Frequency MHz  
Frequency MHz  
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(10/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
ELECTRICAL CHARACTERISTICS  
Z, X, R VS. FREQUENCY CHARACTERISTICS  
MMZ2012Y300BT000  
MMZ2012Y600BT000  
MMZ2012Y121BT000  
50  
40  
30  
20  
10  
0
120  
100  
80  
60  
40  
20  
0
200  
150  
100  
50  
Z
Z
Z
R
R
R
X
X
X
0
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
10000  
10000  
10000  
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
10000  
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ2012Y301BT000  
MMZ2012Y601BT000  
MMZ2012Y102BT000  
600  
800  
700  
600  
500  
1200  
1000  
500  
400  
800  
Z
Z
R
R
Z
R
400  
600  
300  
300  
200  
100  
0
400  
200  
0
200  
X
X
X
100  
0
1
10  
100  
1000  
)
1
10  
100  
1000  
)
1
10  
100  
1000  
)
10000  
10000  
10000  
(
(
(
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ2012Y152BT000  
MMZ2012Y202BT000  
MMZ2012D800BT000  
1800  
1600  
1400  
1200  
1000  
800  
600  
400  
200  
0
2500  
700  
600  
500  
400  
300  
200  
100  
0
2000  
Z
Z
1500  
R
1000  
500  
Z
X
X
X
R
R
0
1
10  
100  
1000  
1
10  
100  
1000  
)
1
10  
100  
1000  
( )  
Frequency MHz  
(
)
(
Frequency MHz  
Frequency MHz  
MMZ2012D121BT000  
MMZ2012D301BT000  
1200  
1000  
800  
600  
400  
200  
0
4500  
4000  
3500  
3000  
2500  
2000  
1500  
1000  
500  
Z
Z
X
R
X
R
0
1
10  
100  
1000  
)
1
10  
100  
1000  
( )  
Frequency MHz  
(
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.
(11/11)  
E M C C o m p o n e n t s  
MMZ2012 type  
PACKAGING STYLE  
REEL DIMENSIONS  
2.0 0.5  
1.0  
+2.0  
–0.0  
8.4  
ø13 0.2  
ø21 0.8  
14.4max.  
ø180 2.0  
Dimensions in mm  
TAPE DIMENSIONS  
2.0±0.05  
4.0±0.1  
1.50+0.1  
A
4.0±0.1  
K
Dimensions in mm  
K
Type  
MMZ2012  
A
1.5±0.2  
B
P1  
4.0±0.1  
2.3±0.2  
1.1max.  
160min.  
Taping  
200min.  
300min.  
Drawing direction  
Dimensions in mm  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz2012_en.

相关型号：

MMZ2012D800BTD25

 FERRITE BEAD 80 OHM 0805 1LN
TDK

MMZ2012R102A

 Ferrite Chip, 1 Function(s), 0.5A, ROHS COMPLIANT, SMD, 2 PIN
TDK

MMZ2012R102AT

 Ferrite Chip, 1 Function(s), 0.5A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TDK

MMZ2012R102AT000

 Ferrite Chip, 1 Function(s), 0.5A,
TDK

MMZ2012R102ATD25

 FERRITE BEAD 1 KOHM 0805 1LN
TDK

MMZ2012R121A

 Ferrite Chip, 1 Function(s), 0.8A, ROHS COMPLIANT, SMD, 2 PIN
TDK

MMZ2012R121AT

 Ferrite Chip, 1 Function(s), 0.8A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TDK

MMZ2012R121AT000

 Ferrite Chip, 1 Function(s), 0.8A,
TDK

MMZ2012R121ATD25

 Ferrite Chip, 1 Function(s), 0.8A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TDK

MMZ2012R150A

 Ferrite Chip, 1 Function(s), 1.5A, ROHS COMPLIANT, SMD, 2 PIN
TDK

MMZ2012R150AT000

 Ferrite Chip, 1 Function(s), 1.5A,
TDK

MMZ2012R150ATD25

 FERRITE BEAD 15 OHM 0805 1LN
TDK
©2020 ICPDF网 联系我们和版权申明